Home > Articles

This chapter is from the book

This chapter is from the book

Interrogation Zone Considerations

Special considerations should be addressed when setting up an RFID system with multiple interrogators that have overlapping interrogation zones. You can deal with these types of situations in several ways, such as using dense interrogator mode, interrogator synchronization, arbitration, and anticollision protocols. Some of these features are only available with Generation 2 devices.

Dense Interrogator Mode

Dense interrogator mode, also called dense reader mode, provides each interrogator the capability to operate at a slightly different frequency, which helps reduce the radio interference between interrogators. Other techniques are used as well, such as Listen Before Talk (LBT), frequency hopping, or a combination of the two.

Listen Before Talk

Using the LBT technique, an interrogator tries to "listen or hear" whether another interrogator is using a channel. If it learns that another interrogator operates on that channel, it rolls to another channel to avoid interfering with the other interrogator.

Frequency Hopping

Interrogation signals hop between channels within a certain frequency spectrum. In the United States, they can hop between 902 MHz and 928 MHz, and they can be required to listen for a signal before using a channel. These guidelines are supplied by the FCC and are discussed in Chapter 9, "Standards and Regulations."

Interrogator Synchronization

In certain applications that require multiple interrogators operating at the same time and in the same proximity, it is necessary to coordinate their transmitting and receiving functions. The radio transmissions from the interrogator's antennas may interfere with other interrogators, so much so that the tags are unable to completely understand the information being read or written and the interrogator may misread the tag. The level of interference depends on a number of factors, which include

  • The sizes and types of the antennas
  • The output power of the antennas
  • The distances between antennas
  • The presence (or absence) of shielding

Variations in local conditions can affect the general noise background. For example, radio frequency interference (RFI) and electrical noise can travel from one interrogator zone to another via conducted metal structures. Metal structures can include the frames of metal buildings, reinforcing bars in concrete floors, and power or data cables.

Several synchronization methods are used; we discuss the main three:

  • Software synchronization
  • Multiplexing
  • Shielding

Software Synchronization

The software synchronization method can be used when multiple interrogators are connected to the same communication bus. As interrogators are individually addressable, the controlling (host) computer is able to command each interrogator to transmit at a separate time so that it is not possible for more than one interrogator to be transmitting at the same time.


In the multiplexing method, a single interrogator is connected through a switching box (MUX) to multiple antennas. The interrogator output is directed to each antenna in turn, again ensuring that only one antenna is transmitting at a time.

Multiplexers need to take advantage of solid state circuitry for switching versus mechanical switching. Because solid state switching introduces signal loss, the interrogator power output is normally increased to compensate for the discrepancy. Mechanical switches or relays are not feasible due to their construction and use of moving parts. The moving parts undergo high levels of wear, which reduce their functionality during high loads or peaks. Ultimately, the constant switching will result in failure of the mechanical switch.

Multiplexing divides the time available to read a tag by the number of channels on the multiplexer. Because of this timing issue, the interrogator needs additional time to ensure a complete read has been achieved, especially if the tags are moving quickly through an interrogation field.


Shielding prevents interference between interrogators. It also prevents tags that are passing outside the interrogating system from being interrogated by an adjacent system, and when antennas are close together, shielding prevents the same tag from being interrogated by an adjacent antenna.

Shielding can also act as a barrier to prevent metal sheets or other objects that have been left next to an antenna from affecting the performance of tags and interrogators.

Shielding can also be used when a large concentration of other devices operating in the 902–928 MHz spectrum is present, such as older 900 MHz wireless systems or cordless phones.


Arbitration is a method of identifying all of the transponders in the reader's field. Arbitration precedes the anticollision mechanism.

Arbitration works differently in Generation 1 and Generation 2 protocols. In Generation 1 all the tags have to communicate their nth bit to the reader. If the received signal (consisting of nth bits of all tags) is composed of 1 and 0, the read/write module assigns 0 to the nth bit. If the received signal is composed of 0 only, the read/write module assigns 0 to the nth bit. If the received signal is composed of 1 only, the read/write module assigns 1 to the nth bit. Then the tags communicate bit n-1 to the reader and it goes through the same process as the nth bit. The same way is identified bit n-2 until bit 1. At the end of this process, a whole tag has been identified. This tag is disabled so that it does not answer any longer during subsequent arbitrations. Each time a whole tag is identified, it is "put to sleep" and the whole process starts all over until all of the tags are identified.

Sometimes the tag may take tag longer to wake up or it can never wake up. To avoid this problem, Generation 2 does not use the sleep or quiet state, but two states—A and B. If the reader decides to interrogate only A tags, as it interrogates them it changes their state to B. Now it reads all B tags and changes their state to A. That way the reader knows how many tags it read. This method is called AB Symmetry.

To identify each tag, Generation 2 uses Q algorithm. Gen 2 tags have the ability to generate random numbers. The reader will tell the tags the range in which they should generate a random number by issuing a query command with a Q value ranging from 0 to 15. If it gets back no response to its queries, it will automatically decrease the Q value. If it gets more than one tag responding, it will increase the Q value, thereby increasing the range of numbers that can be generated by the tags. This method is quite complex to be explained in detail in this book but it is good to know that it assures that the reader is talking only to the tags that it intends to.

Collisions and Anticollision Methods

When two or more tags respond simultaneously, this is known as a collision. Anticollision processing is the means by which the interrogator distinguishes one tag from the others so only one tag is processed at a time.

Anticollision algorithms are commonly classified as either probabilistic or deterministic.

In probabilistic algorithms (also called asynchronous), the tags respond at randomly generated times. There are several variations of probabilistic algorithms, depending on the amount of control the interrogator has over the tags. Many of them are based on the ALOHA scheme in networking. This scheme involves a node transmitting a data packet after receiving a data packet. If a collision occurs, a node becomes saturated and transmits the packet again after a random delay. The interrogator keeps transmitting until the collision does not happen. The times at which interrogators can respond can be slotted or continuous. This mode makes slight restriction in the transmission independence of individual data packets. If packet collisions happen under slotted ALOHA mode, the packets overlap completely, and that considerably increases the data transfer.

In deterministic algorithms (also called synchronous), the interrogator sorts through the tags based on their unique identification number (UID). The tags do not have to rely on a complete collision-free transmission and do not have to take turns communicating to the interrogator. The simplest deterministic scheme is the binary tree/tree-walking scheme, in which the interrogator searches the tree of all possible identification numbers. This search is quite time consuming, and it is based on the knowledge of the tag's UID. At each node in the tree, the interrogator checks for responses. Only tags whose identifier is a child of the checked node respond. The lack of a response implies that the subtree is empty. The presence of a response gives the interrogator an indication as to where to search next.

There are two other common types of anticollision algorithms, FM0 and Miller Subcarrier.

  • FM0 is currently used in ISO standards. This algorithm is fast but more susceptible to interference.
  • Miller Subcarrier is slower but better in RF noisy environments and is supported by Generation 2 readers. This algorithm uses narrow spectrum for the tags to send back their signal and fits it between the channels used by the reader. That way the RF signals coming from the reader do not cover the signals coming back from the tags. Miller Subcarrier uses advanced filtering techniques to separate the tag's response from the reader's transmissions and other noise compared to FM0.

Reader Commands

The five basic command operations to manage tag populations are

  • Select— This command is used to determine which groups of tags will respond. Prior to conduction of an inventory, a Select command makes it possible to conditionally isolate only tags with desired characteristics such as a particular date code, manufacturer code, or others. By targeting only a certain segment of EPC memory containing this description, readers can easily sort through the tag population and access just a certain group of tags within its field.
  • Inventory— This command is used to identify (singulate) individual tags from a group.
  • Access— This command is used after the tags have been singulated and individual commands can now be addressed to those tags. Access commands allow the interrogator to write individual tag memory fields directly (with EPC and/or password data), lock the tag, or kill the tag.
  • Lock— This command allows a reader to lock individual passwords, preventing subsequent reads or writes, or lock individual memory banks, preventing subsequent writes.
  • Kill— This command permanently disables a tag from talking back to a reader, which renders the tag inoperative. This feature can be used to address privacy concerns; however, the Kill command also can be issued maliciously. To prevent unauthorized kills, this command will become password protected as soon as the specifications have been defined for killing a tag.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.


Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.


If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information

Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.


This site is not directed to children under the age of 13.


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information

If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information

Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure

Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact

Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice

We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020