Home > Articles > Certification > Cisco Certification > CCNP

This chapter is from the book

Chapter 9 Answers

"Do I Know This Already?"

  1. c

  2. c

  3. b

  4. b

  5. c

  6. c

  7. a

  8. b

  9. d

  10. b

  11. b

  12. c

Q&A

  1. What is a bridging loop? Why is it bad?

    A bridging loop is a path through a bridged or switched network that provides connectivity in an endless loop. Unknown unicast, broadcast, or multicast frames introduced into the loop are propagated by each switch, causing the frames to circulate around and around the loop. Network bandwidth and CPU resources can be absorbed completely by the increasing amount of broadcast traffic. Breaking the loop connectivity can end bridging loops.

  2. Put the following STP port states in chronological order:

    1. Learning
    2. Forwarding
    3. Listening
    4. Blocking

    d, c, a, b

  3. Choose two types of STP messages used to communicate between bridges:

    1. Advertisement BPDU
    2. Configuration BPDU
    3. ACK BPDU
    4. TCN BPDU

    b, d

  4. What criteria are used to select the following?

    1. Root Bridge
    2. Root Port
    3. Designated Port
    4. Redundant (or secondary) Root Bridges
    1. Lowest Bridge ID (Bridge priority, MAC address)
    2. Lowest Root Path Cost
    3. Lowest Root Path Cost on a shared segment
    4. Next-to-lowest Bridge ID

    If a tie occurs, these parameters are used to decide:

    1. Lowest Bridge ID
    2. Lowest Root Path Cost
    3. Lowest Sender Bridge ID
    4. Lowest Sender Port ID
  5. Which of the following switches becomes the Root Bridge, given the information in the following table? Which switch becomes the secondary Root Bridge if the Root Bridge fails?

    Switch Name

    Bridge Priority

    MAC Address

    Port Costs

    Catalyst A

    32,768

    00-d0-10-34-26-a0

    All are 19

    Catalyst B

    32,768

    00-d0-10-34-24-a0

    All are 4

    Catalyst C

    32,767

    00-d0-10-34-27-a0

    All are 19

    Catalyst D

    32,769

    00-d0-10-34-24-a1

    All are 19

    Catalyst C will become the primary Root because of its lower Bridge Priority value. (Bridge Priority has a greater weight on the election than a lower MAC address.) The secondary Root will be Catalyst B; both A and B have the next-lowest Bridge Priorities, but B also has a lower MAC address.

  6. What conditions cause an STP topology change? What effect does this have on STP and the network?

    A topology change occurs when a port moves to the Forwarding state, or from Forwarding or Learning to the Blocking state. During a topology change, addresses are aged out in Forward Delay seconds, whereas active stations are not aged out of the bridging table. The STP is not recomputed; TCN BPDUs are sent throughout the network, notifying other switches of the topology change. Only the port where the topology change is occurring is affected, by moving through the STP states.

  7. A Root Bridge has been elected in a switched network. Suppose that a new switch is installed with a lower Bridge ID than the existing Root Bridge. What will happen?

    The new switch will begin life by advertising itself as the Root Bridge, thinking it is the only bridge on the network. Because it has a lower Bridge ID than the current Root, it will win the election after the BPDUs converge and when all switches have a knowledge of the new, better choice.

  8. Suppose that a switch receives Configuration BPDUs on two of its ports. Both ports are assigned to the same VLAN. Each of the BPDUs announces Catalyst A as the Root Bridge. Can the switch use both of these ports as Root Ports? Why?

    The STP doesn't allow more than one Root Port per switch (bridge). Because of this, both ports cannot become Root Ports. Only the port with the lowest Root Path Cost (or one of the successive STP tie-breaker decisions) will become the Root Port.

  9. How is the Root Path Cost calculated for a switch port?

    The Root Path cost is a cumulative value that is incremented as Configuration BPDUs are passed from switch to switch. A switch adds the Port Cost of the local port to the current Root Path Cost value as a BPDU is received.

  10. What conditions can cause ports on a network's Root Bridge to move into the Blocking state? (Assume that all switch connections are to other switches. No crossover cables are used to connect two ports on the same switch.)

    By definition, all ports on the Root Bridge are Designated Ports because they are in the closest possible location to the Root Bridge. Therefore, those ports never can be put into the Blocking state. The only exception to this is if two of the Root Bridge switch's ports are connected, a situation that could but shouldn't occur.

  11. What parameters can be tuned to influence the selection of a port as a Root or Designated Port?

    Port Cost

  12. After a bridging loop forms, how can you stop the endless flow of traffic?

    Turn off the switch or unplug a cable on a port that is part of the loop. Turning off the switch is obviously a drastic measure, but it does help to clear the loop. Any method might be used, as long as the loop manually is broken or disconnected. In some cases, the traffic volume caused by the loop can overwhelm the switch CPU. If that happens, you won't be able to connect to the switch CLI to shut down an interface or reload the switch.

  13. In a BPDU, when can the Root Bridge ID have the same value as the Sender Bridge ID?

    When the switch that is sending the BPDU is also the Root Bridge

  14. Which of these is true about the Root Path Cost?

    1. It is a value sent by the Root Bridge that cannot be changed along the way.
    2. It is incremented as a switch receives a BPDU.
    3. It is incremented as a switch sends a BPDU.
    4. It is incremented by the Path Cost of a port.

    b, d

  15. Suppose that two switches are connected by a common link. Each must decide which one will have the Designated Port on the link. Which switch takes on this role if these STP advertisements occur?

    1. The link is on switch A's port number 12 and on switch B's port number 5.
    2. Switch A has a Bridge ID of 32,768:0000.1111.2222, and switch B has 8192:0000.5555.6666.
    3. Switch A advertises a Root Path Cost of 8, while B advertises 12.

    Switch A will have the Designated Port. The STP tie-breaking sequence must be used for the decision. The first relevant decision is that of the lowest Root Path Cost, advertised by switch A. If both switches advertised an identical Root Path Cost, the lowest Sender Bridge ID (that of switch B) would be used.

  16. Using the default STP timers, how long does it take for a port to move from the Blocking state to the Forwarding state?

    30 seconds

  17. If the Root Bridge sets the Topology Change flag in the BPDU, what must the other switches in the network do?

    Shorten their bridge table aging times

  18. Over what VLANs does the CST form of STP run?

    1. VLAN 1
    2. All active VLANs
    3. All VLANs (active or inactive)
    4. The native VLAN

    d

  19. What is the major difference between PVST and PVST+?

    PVST+ interoperates with CST and PVST.

  20. Two switches are connected by a common active link. When might neither switch have a Designated Port on the link?

    1. When neither has a better Root Path Cost.
    2. When the switches are actually the primary and secondary Root Bridges.
    3. When one switch has its port in the Blocking state.
    4. Never; this can't happen.

    d

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020