Home > Articles

  • Print
  • + Share This
This chapter is from the book

Colors and Gradients

We have briefly gone over how colors work, but this section will delve into more detail and introduce you to gradients, how they work, and how to create them.

The easiest way to adjust color is to use the Color Swatches panel and the Color Mixer panel.

The Color Swatches Panel

Windows, Color Swatches (Ctrl+F9)

As you can see in Figure 3.21, the Color Swatches panel has the default web 256 colors in it as well as a few gradients at the bottom from which you can select. You can sort these colors to group by color or leave them in the standard layout. You can add colors from color files (.clr), which can be found at C:\Program Files\Macromedia\Flash8\en\First Run\Color Sets. You can also add colors from graphics by going through the following steps:

  1. Open the Color Swatches panel.

  2. Select Add Colors from the submenu in the panel.

  3. Choose any GIF file (or use image_1.gif, which can be found on the website).

That’s it. You now have all the colors from that GIF file. If you do not see any change in the colors in the panel, the GIF you chose did not have any new colors. Try a higher-quality GIF file (nature pictures are great for this).

After you have the new colors in your swatches, you can save them back out as a .clr file or even set them as your default from the same submenu.

Figure 3.21

Figure 3.21 The Color Swatches panel.

The Color Mixer Panel

Windows, Color Mixer (Shift+F9)

The Color Mixer panel can create and edit colors and gradients. As you can see from Figure 3.22, the Color Mixer panel is a bit different than the Color Swatches panel; however, they work together to create and store colors and gradients.

This walkthrough will go over how to edit and save a gradient using the Color Mixer panel.

  1. Draw an oval on the stage with a solid color.

  2. With the Color Mixer panel open, select Radial from the fill type drop-down. (It will now look similar to Figure 3.22.)

  3. You can select either of the handles, slide them along the color bar, or change their color completely using the color drop-down. You can also add colors to the color bar by clicking when you see a white plus sign.

  4. When you’re satisfied with your new gradient, select the submenu drop-down from the Color Mixer panel and choose Add Swatch.

Figure 3.22

Figure 3.22 The Color Mixer panel.

  • + Share This
  • 🔖 Save To Your Account