Home > Articles > Hardware > Upgrading & Repairing

This chapter is from the book

System Types

PCs can be broken down into many categories. I like to break them down in two ways—by the type of software they can run and by the motherboard host bus, or processor bus design and width. Because this book concentrates mainly on hardware, let's look at that first.

When a processor reads data, the data moves into the processor via the processor's external data bus connection. The processor's data bus is directly connected to the processor host bus on the motherboard. The processor data bus or host bus is also sometimes referred to as the local bus because it is local to the processor that is connected directly to it. Any other devices connected to the host bus essentially appear as if they are directly connected to the processor as well. If the processor has a 32-bit data bus, the motherboard must be wired to have a 32-bit processor host bus. This means the system can move 32 bits of data into or out of the processor in a single cycle.

See "Data I/O Bus," p. 46.

Different processors have different data bus widths, and the motherboards designed to accept them require a processor host bus with a matching width. Table 2.2 lists all the Intel and major Intel-compatible processors, their data bus widths, and their internal register sizes.

Table 2.2  Intel and Intel-Compatible Processors and Their Data Bus/Register Widths

Processor

Data Bus Width

Register Size

8088

8-bit

16-bit

8086

16-bit

16-bit

286

16-bit

16-bit

386SX

16-bit

32-bit

386DX

32-bit

32-bit

486/AMD-5x86

32-bit

32-bit

Pentium/AMD-K6

64-bit

32-bit

Pentium Pro/Celeron/II/III

64-bit

32-bit

AMD Duron/Athlon/Athlon XP

64-bit

32-bit

Pentium 4

64-bit

32-bit

Itanium

64-bit

64-bit

AMD Athlon 64

64-bit

64-bit


A common misconception arises in discussions of processor widths. Although the Pentium and newer processors all have 64-bit data bus widths, their internal registers are only 32 bits wide, and they process 32-bit commands and instructions. The Intel Itanium and AMD Athlon 64 are the first Intel-compatible processors to have 64-bit internal registers. Thus, from a software point of view, all chips from the 386 to the Athlon/Duron and Celeron/Pentium 4 have 32-bit registers and execute 32-bit instructions. From the electronic or physical perspective, these 32-bit, software-capable processors have been available in physical forms with 16-bit (386SX), 32-bit (386DX and 486), and 64-bit (Pentium and beyond) data bus widths. The data bus width is the major factor in motherboard and memory system design because it dictates how many bits move in and out of the chip in one cycle.

See "Internal Registers (Internal Data Bus)," p. 48.

The Itanium processor has a new Intel architecture 64-bit (IA-64) instruction set, but it can also process the same 32-bit instructions as processors ranging from the 386 through the Pentium 4. The Athlon 64 has a new x86-compatible 64-bit architecture but is designed to use 32-bit instructions written for normal Intel or compatible x86 processors as efficiently as a normal Athlon XP or comparable processor would.

See "Processor Specifications," p. 41.

Referring to Table 2.2, you can see that all Pentium and newer systems have a 64-bit processor bus. Pentium processors, whether they are the original Pentium, Pentium MMX, Pentium Pro, or even the Pentium II/III or 4, all have 64-bit data buses, as do comparable processors from AMD (K6 family, Athlon, Duron, Athlon XP, and Athlon 64).

As you can see from Table 2.2, systems can be broken down into the following hardware categories:

  • 8-bit

  • 16-bit

  • 32-bit

  • 64-bit

What is interesting is that besides the bus width, the 16- through 64-bit systems are remarkably similar in basic design and architecture. The older 8-bit systems are very different, however. This gives us two basic system types, or classes, of hardware:

  • 8-bit (PC/XT-class) systems

  • 16/32/64-bit (AT-class) systems

In this verbiage, PC stands for personal computer; XT stands for an extended PC; and AT stands for an advanced-technology PC. The terms PC, XT, and AT, as they are used here, are taken from the original IBM systems of those names. The XT was a PC system that included a hard disk for storage in addition to the floppy drives found in the basic PC system. These systems had an 8-bit 8088 processor and an 8-bit Industry Standard Architecture (ISA) bus for system expansion. The bus is the name given to expansion slots in which additional plug-in circuit boards can be installed. The 8-bit designation comes from the fact that the ISA bus found in the PC/XT class systems can send and receive only 8 bits of data in a single cycle. The data in an 8-bit bus is sent along eight wires simultaneously, in parallel.

See "The ISA Bus," p. 350.

16-bit and greater systems are said to be AT-class, which indicates that they follow certain standards and that they follow the basic design first set forth in the original IBM AT system. AT is the designation IBM applied to systems that first included more advanced 16-bit (and later, 32- and 64-bit) processors and expansion slots. AT-class systems must have a processor that is compatible with Intel 286 or higher processors (including the 386, 486, Pentium, Pentium Pro, Pentium II, Pentium III, Pentium 4, and Pentium M processors), and they must have a 16-bit or greater system bus. The system bus architecture is central to the AT system design, along with the basic memory architecture, interrupt request (IRQ), direct memory access (DMA), and I/O port address design. All AT-class systems are similar in the way these resources are allocated and how they function.

The first AT-class systems had a 16-bit version of the ISA bus, which is an extension of the original 8-bit ISA bus found in the PC/XT-class systems. Eventually, several expansion slot or bus designs were developed for AT-class systems, including the following:

  • 16-bit ISA/AT bus

  • 16-bit PC Card (PCMCIA) bus

  • 16/32-bit Extended ISA (EISA) bus

  • 16/32-bit PS/2 Micro Channel Architecture (MCA) bus

  • 32-bit VESA Local (VL) bus

  • 32/64-bit Peripheral Component Interconnect (PCI) bus

  • 32-bit CardBus (PCMCIA) bus

  • PCI Express bus

  • ExpressCard bus

  • 32-bit Accelerated Graphics Port (AGP) bus

A system with any of these types of expansion slots is by definition an AT-class system, regardless of the actual Intel or Intel-compatible processor that is used. AT-type systems with 386 or higher processors have special capabilities not found in the first generation of 286-based ATs. These distinct capabilities are in the areas of memory addressing, memory management, and possible 32- or 64-bit wide access to data. Most systems with 386DX or higher chips also have 32-bit bus architectures to take full advantage of the 32-bit data transfer capabilities of the processor.

Until recently, PC systems continued to incorporate a 16-bit ISA slot for backward-compatibility and lower-function adapters. However, in virtually all motherboards today, ISA slots have been completely replaced by PCI slots along with an AGP slot (a specialized expansion slot design) available in most systems (except for a few entry-level models with integrated video) for high-performance graphics. In addition, most portable systems use PC Card (PCMCIA) and CardBus slots in the portable unit and PCI slots in optional docking stations.

Chapter 4, "Motherboards and Buses," contains in-depth information on these and other PC system buses, including technical information such as pinouts, performance specifications, and bus operation and theory.

Table 2.3 summarizes the primary differences between the older 8-bit (PC/XT) systems and modern AT systems. This information distinguishes between these systems and includes all IBM and compatible models.

Table 2.3  Differences Between PC/XT and AT Systems

System Attributes

(8-Bit) PC/XT Type

(16/32/64-Bit) AT Type

Supported processors

All x86 or x88

286 or higher

Processor modes

Real

Real/Protected/Virtual Real

Software supported

16-bit only

16- or 32-bit

Bus slot width

8-bit

16/32/64-bit

Slot type

ISA only

ISA, EISA, MCA, PC Card, CardBus, ExpressCard, VL-Bus, PCI, PCI Express, and AGP

Hardware interrupts

8 (6 usable)

16 (11 usable)

DMA channels

4 (3 usable)

8 (7 usable)

Maximum RAM

1MB

16MB/4GB or more

Floppy controller speed

250Kbps

250/300/500/1,000 Kbps

Standard boot drive

360KB or 720KB

1.2MB/1.44MB/2.88MB

Keyboard interface

Unidirectional

Bidirectional

CMOS memory/clock

None standard

MC146818-compatible

Serial-port UART

8250B

16450/16550A or greater


The easiest way to identify a PC/XT (8-bit) system is by the 8-bit ISA expansion slots. No matter which processor or other features the system has, if all the slots are 8-bit ISA, the system is a PC/XT. AT (16-bit plus) systems can be similarly identified—they have 16-bit or greater slots of any type. These can be ISA, EISA, MCA, PC Card (formerly PCMCIA), CardBus, VL-Bus, or PCI. Any system using the new high-speed serial buses such as PCI Express or ExpressCard also qualifies as an AT-class system. Using this information, you can properly categorize virtually any system as a PC/XT type or an AT type. No PC/XT type (8-bit) systems have been manufactured for many years. Unless you are in a computer museum, virtually every system you encounter today is based on the AT-type design.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020