Home > Articles > Networking

  • Print
  • + Share This
This chapter is from the book

This chapter is from the book


DSL and cable modem network access are two alternate ways to connect to an NSP without the use of more expensive dedicated service. DSL technology is a modem technology using existing twisted-pair telephone lines capable of carrying high-bandwidth applications.

There are several forms of xDSL, each designed around specific goals and needs of the marketplace. Each of these is summarized in Table 7-2.

Cable systems originally were designed to deliver broadcast television signals efficiently to subscribers' homes. Downstream video programming signals begin around 50 MHz, the equivalent of channel 2 for over-the-air television signals. The 5 MHz to 42 MHz portion of the spectrum is usually reserved for upstream communications from subscribers' homes.

Each standard television channel occupies 6 MHz of the Radio Frequency (RF) spectrum. Traditional cable systems have 400 MHz of downstream bandwidth, capable of carrying the equivalent of 60 analog TV channels. Modern hybrid fiber/coax (HFC) systems have 700 MHz of downstream bandwidth, with the capacity for approximately 110 channels.

The MCNS defined the DOCSIS 1.0 standard, which in turn was accepted as the North American standard.

Table 7-2 DSL Service Summary

DSL Type


Data Rate Downstream; Upstream

Distance Limit



Asymmetric digital subscriber line

1.544 to 6.1 Mbps downstream;

16 to 640 Kbps upstream

1.544 Mbps at 18,000 feet;

2.048 Mbps at 16,000 feet;

6.312 Mbps at 12,000 feet;

8.448 Mbps at 9,000 feet

Used for Internet and web access, motion video, video on demand, remote LAN access.


High-data-rate digital subscriber line

1.544 Mbps duplex on two twisted-pair lines; 2.048 Mbps duplex on three twisted-pair lines

12,000 feet on 24-gauge wire

T1/E1 service between server and phone company or within a company; WAN, LAN, server access.


Single-line digital subscriber line

1.544 Mbps duplex (U.S. and Canada);

2.048 Mbps (Europe) on a single duplex line downstream and upstream

12,000 feet on 24-gauge wire

Same as for HDSL but requiring only one line of twisted-pair.


Very-high digital subscriber line

12.9 to 52.8 Mbps downstream;

1.5 to 2.3 Mbps upstream;

1.6 Mbps to 2.3 Mbps downstream

4500 feet at 12.96 Mbps;

3000 feet at 25.82 Mbps;

1000 feet at 51.84 Mbps

ATM networks; Fiber to the Neighborhood.

DSL and cable modem network access is not available in all parts of the country or even to every house and business within a city. Before planning on deploying either of these services, it is imperative to discuss these plans with the local DSL/Cable NSP. In the event these services are not available for connectivity, you need to consider the more traditional Frac-T1/T3, ISDN, or dial-up services.

  • + Share This
  • 🔖 Save To Your Account