Home > Articles

This chapter is from the book

Choosing a File System: FAT, FAT32, or NTFS?

The next major consideration on the pre-installation agenda is determining what type of file system you intend to use. The rules and regulations discussed in the preceding section might have narrowed down this choice for you. Still, you might want to read about the pros and cons of the various file-keeping schemes in use on Windows XP machines and consider a few details on how they influence your installation.

NOTE

Windows XP doesn't know about compressed drives such as those created with DriveSpace or DoubleSpace. You have to decompress them before installing to Windows XP. Decompressing is a real pain if your disk space is totally packed (because this process causes your files to take up more space). You might have to decompress in stages, moving data off the hard disk to backup media or another drive.

As mentioned in the previous sections on dual-booting Windows XP and a second operating system, it's a good idea to think about what file system you're going to use, preferably before installing Windows XP. Although you can use utilities in Windows XP and external utilities such as Partition Magic to convert partitions between file systems after the fact, forethought and advance partition preparation are the better path. Let's do a little review of file systems you can use and advantages of each.

A file system is a scheme by which data files and directories (folders) are stored and retrieved on a floppy disk or hard disk. Tape and other media have file systems as well, but here I'm talking only about hard disks. Windows XP supports several file systems: the NT File System (NTFS) or one of the file allocation table file systems (FAT or FAT32).

A Brief History of File Systems

In the beginning (of PCs, that is), there was FAT, and it was good. FAT is the system that DOS uses; it's been around for a long time, since the early eighties. FAT stands for File Allocation Table. A file allocation table is basically a table of contents of the disk that the operating system uses to look up the location of a file, even if the file is broken up in pieces (sectors) scattered across the disk's surface. The FAT scheme brought relatively simple, reliable, and efficient floppy and small hard disk storage to the PC. It's also the scheme that, unlike the Macintosh file system, brought the confining 8.3 file-naming convention that many of us learned to live with and hate. The 8.3 file-naming convention simply means that a file can have a maximum of 8 characters for its filename and up to three characters for its extension (after the period). For example, myletter.doc is an example of the longest-possible 8.3 file name.

When NT 3.x appeared, it included NTFS as an acknowledgment of the shortcomings of the FAT system, including support for a much-larger hard drive partition size limit of 2 gigabytes (GB). NTFS also provided long-awaited long filenames, more security and fault tolerance, better disk compression, support for hard disks up to 2 terabytes (that's big), and support for advanced multiple-disk arrangements (RAID). Also, as drives become larger, efficiency of disk storage didn't fall off under NTFS as it did with FAT.

Windows 95 brought long filenames to FAT through some sleight of hand, but still the system was not good at dealing with the newer larger drives and wasted a bunch of space on them when it stored tiny files. So, to both provide good backward compatibility with FAT disks and still offer support for large drives, Windows 95 OSR2 and Windows 98 both included a new file system called FAT32. Essentially a beefed up FAT file system, FAT32 isn't as robust as NTFS, and it's not compatible with NTFS. But the FAT32 system eliminated the 2GB upper limit on partition size support (it also can run as high as 2TB) and increased effective storage capacity by lowering the cluster size on large drives. NT 4 can't read or work with FAT32, nor can DOS and Windows 3.x. However, both Windows 2000 and Windows XP support FAT32.

NOTE

Clusters are the smallest amount of space that can be used to store information on a hard disk. On smallish drives, the cluster size is also pretty small, so storing dinky files that are only, say, 1K in size is pretty efficient (there is little wasted space). But on today's huge drives, under the FAT scheme, the cluster would necessarily be much larger (this is a limitation of the FAT system, not the drive). You end up donating serious amounts of space to no good cause. The bottom line is that FAT32 and NTFS get you more bang for your hard disk buck, because lowering the cluster size allows for more efficient use of space, especially on larger drives.

The bottom line? As with Windows NT and Windows 2000, NTFS is the recommended file system for use with Windows XP. NTFS has all the basic capabilities of FAT as well as all the advantages of FAT32 file systems. The weird thing is that now you have to think about three different file systems when considering dual-booting. When you consider that you have at least nine Microsoft operating systems to choose from, and three file systems, the combinations get complex. Therefore, understanding the limitations of each is important.

TIP

You can convert an existing partition to NTFS during Setup, but if you want to do it after you install XP, no problem. You can convert it at any time by using a command-line utility called convert.exe (see the "Convert" section in Chapter 26). Another approach is to use a third-party tool like PartitionMagic.

One of the prime points to remember is that if you're dual-booting, only Windows NT, Windows 2000, and Windows XP systems can read NTFS partitions. If you don't care about accessing the NTFS partition from, say, Windows 98, this is not a big deal. It simply does not appear in Windows Explorer or is not available from your applications. This is the main reason Microsoft doesn't want you to mix file systems; it simply confuses people.

When you're running partitions larger than 32GB, you should really format them as NTFS. If you choose to use FAT, anything over 2GB should be formatted FAT32.

NOTE

File systems are terribly complex and a subject far beyond what I can cover in a Windows book. For the most part, you don't need to know more than what is presented here, unless you are naturally inclined to learn everything you can about complex topics (don't worry, you are not alone). In that case, I recommend that you pick up a copy of Upgrading and Repairing PCs, Thirteenth Edition, by Scott Mueller (also published by Que).

Disk Partitioning Tips

Disk partitioning is a scheme by which you can have a single hard disk look like multiple hard disks to the operating system. If you partition a disk into, say, two partitions, the operating system displays disks C and D rather than just C. You split up the space on the drive between the partitions based on your needs.

One of the most notable needs for disk partitioning was to accommodate operating systems that imposed limitations on the size of partitions. As hard disks grew in size, partitioning was required in order to use the entire disk. Because FAT had a limitation of 2GB, users relied on partitioning or other software driver schemes to get around this imposed top end. Another common reason for partitioning is for running dissimilar operating systems, ones that cannot read from or write to a common file system. Because each partition can have its own disk format, this could often circumambulate such requirements. One partition could be FAT, another NTFS, and another HPFS (for OS/2), and so on. Any hard disk can contain up to four primary partitions.

Only primary partitions can be marked active. An active primary partition is where the computer's BIOS looks for a bootable operating system when powered on. In addition to primary partitions, there are extended partitions. A system can have up to four primary partitions or a maximum of three primary partitions and a single extended partition. The extended partition is a bit different than a primary partition. First, extended partitions cannot be marked active. Second, extended partitions must be divided into logical drives. Only primary partitions and logical drives can be formatted and assigned a drive letter. The total number of primary partitions plus logical drives cannot exceed 32 for a single hard drive.

For examples of these issues, see Figure 3.2. Disk 0 has a single primary partition (C), and an extended partition. The extended partition contains two logical drives (D and G) and 1.86 GB of free space. The extended partition is highlighted with a thick border, that's how you distinguish it from primary partitions. This extended partition could contain another 29 logical drives before reaching the 32 division maximum per drive. Disk 1 consists of a single primary partition (F) and 15.11 GB of free space. This free space could be used to create up to 3 additional primary partitions, or up to 2 additional primary partitions and an extended partition containing logical drives. Drive 2 consists of a single primary partition (E).

Figure 3.2 Disk Management viewed through Computer Management, showing drive partitioning.

In most cases, you rarely need to divide a drive into more than 4 sections. And then, that might only occur when you need to divide a large drive into FAT partitions (because each partition cannot be larger than 2GB). The tools you use to create partitions manage the division classification for you. If you use FDISK, you're a bit more aware of the presence of extended partitions and logical drives. If you use the Windows NT, Windows 2000, or Windows XP drive tools (such as the Disk Management tool) you see extended partitions and logical drives labeled, but the OS manages when these need to be created.

Some people use partitions for dividing up their data rather than for accommodating different file systems. You might want a partition to organize information—for example, one for backup data, one for documents and data files, one for applications only, or for the operating system only. Then you can more easily design your backup strategy.

NOTE

When you do a new installation of Windows XP, the Setup program looks around and automatically selects an appropriate disk partition as the destination based on size and format. You can override the choice by clicking the Advanced Options button during Setup, though.

If you're going to dual-boot, you should install on a separate partition. Either create one or use one that is already present. The reason for using a separate partition for each operating system is to prevent Setup from overwriting important files belonging to the other operating system. If you have unpartitioned (different from unused) space on your disk, Setup can create a partition during installation.

If you intend to dual-boot Windows 9x and Windows XP, Windows 9x should be on the first partition. In general computer terms, this means the boot drive. In Windows NT speak, this is the system partition.

→ If you're considering creating a system that is bootable in more than one operating system, see "Dual-Booting Versus Single Booting."

The exact options you have during Setup change depending on your existing hard disk configuration. You might have as many as four options when partitioning your hard disk:

  • If you have adequate unpartitioned space, you can create a new Windows XP partition in that space and install Windows XP in it.

  • If the hard disk is unpartitioned (no partitions at all—freshly formatted) you can create and size the Windows XP partition.

  • If the disk has an existing partition, but you don't care what's in it, Setup lets you delete the partition and create a new one of your chosen format for installing Windows XP. Beware, though; deleting an existing partition destroys every file on the partition.

TIP

Don't even try to install Windows XP on a partition that is less than 3GB. Although Windows XP only requires 1.5GB (only!), I think creating a 3GB partition is more reasonable. If you are upgrading you need an extra 300MB to store the recovery files, and setup doesn't allow you to start the process with less than 1.5GB of free space. You'll want (and need) the additional free space later for future additions and modifications to the operating system.

File System Conversion Limitations

This section lists a few ridiculous warnings and limitations—ridiculous because these steps are not required if you use an intelligent program such as PartitionMagic to prepare your drive partitions before you begin installing XP. Due to limitations of Setup and Microsoft's supplied disk tools (FDISK, for example), you should be aware of these issues. First, most conversions between file systems are multi-step processes involving backing up and then restoring the partitions after reformatting.

For example, although converting to NTFS during installation is easy, if you change your mind and want to revert to FAT, you have to back up all your files on the NTFS partition, reformat the partition as FAT (which erases all the files), and then restore the files from backup. The same is true of converting a FAT partition to FAT32. One workaround is to use the FAT32 converter in Windows 98 or 95 OSR2. Each of these operating systems has a tool that performs such a conversion quite easily.

Second, you can't restore an NTFS v4 (file system from NT 4) partition after you convert it to NTFS v5 (file system from Windows XP, Windows 2000, and Windows NT 4.0 SP4+). There's no easy way out on that score. There is support for NTFS v5 file formats via tools like Partition Magic, though.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020