- Hour 3: Selection Modes
- The Selection Menu
- Selecting Large Areas
- Cutting and Copying
- Quiz Answers
Hour 3: Selection Modes
Now you're making progress. You've learned how to bring images in and out of Photoshop. The next step is learning to work with images and edit them. To do this, you have to select a part of the picture on which you want to work. Selections are just what they seem to beportions of the image that you have selected.
The Selection Tools
There are several ways to select a piece of a picture. You can use any of the Selection tools: Marquee Tools, Lasso Tools, or the Magic Wand. You have different kinds of Selection tools because you sometimes need to make selections in a particular way, such as punching a shape out of an image or selecting all of the sky. Photoshop's Selection tools give you the power to select the whole picture or a single pixel. Just to refresh your memory, Figure 3.1 shows the Selection tools. (The pop-out menus have been shifted so that you can see what's on them.) In Photoshop 7, the tools are spelled out by name, rather than relying on the icons for identity.
Figure 3.1 The Selection tools are at the top of the toolbox.
Rectangular and Elliptical Marquees
The Marquee tools, both Rectangular and Elliptical, are found in the upper-left corner of the toolbox. To select the Rectangular Marquee, just click it or press the letter M on your keyboard. To select the Elliptical Marquee (also known as the Oval Marquee), click and hold the Rectangular Marquee in the toolbox. When the pop-out menu appears, select the Elliptical Marquee. Use this method to select the Single Row or Column Marquee, too.
Assuming that the Rectangular Marquee is the currently selected tool, you can also press Shift+M to switch back and forth between the two. The Elliptical Marquee Tool works the same way as the Rectangular Marquee Tool. The icon will change accordingly on the Tool Options bar.
To experiment with its many uses, first create a new file (go back to Hour 1, "The Basics," if you can't remember how). Again, give yourself some room to work. Set the dimensions to the Photoshop default.
Click the Marquee Tool in the toolbox.
As you move the tool over the canvas, the cursor appears as a crosshair.
While the cursor is over the canvas, click and hold the mouse button, and then drag out a marquee.
Experiment with dragging out an elliptical marquee. Try to get a sense for how marquees appear. Try dragging from different directions.
If you press and hold the Shift key after you've made your first selection and before you click again, you can make additional selections. Take care to continue holding the Shift key while making additional selections. (You'll see a plus sign beneath the crosshair.) Where the selected areas overlap, they'll merge to form one larger selected shape. In Figure 3.2, I've shown both single marquee shapes and a combination of shapes making a selection somewhat resembling the Taj Mahal.
Figure 3.2 You can also combine square and round selections.
To draw a perfectly square box or round circle, select Constrained Aspect Ratio from the Style pop-up menu on the Tool Options bar, or press the Shift key as you drag the shape. Use Fixed Size to make multiple selections that are the same size.
To deselect an area inside another area (making what graphic artists call a knockout), press Option (Mac) or Alt (Windows) as you drag the inner shape. (You'll see a minus sign beneath the crosshair.) For instance, if you have a circle selected and drag another smaller circle inside it while pressing Option (Mac) or Alt (Windows), the selected shape is a donut.
The thin, horizontal (Single Row) and vertical (Single Column) marquees select a single row of pixels, either horizontally or vertically. They are often useful for cleaning up the edges of an object.
When you are dealing with selections, it is important to remember that, for good or bad, only the area within the confines of the marquee can be edited. It is the only active area of the canvas. Thus, after a selection is made, you can perform whatever action you want, but before you move on, the selection must be turned off, or deselected, by clicking outside the selected area with one of the Marquee tools or by pressing Command+D (Mac) or Control+D (Windows). Until you do so, you can only edit within the selection's boundaries. On the other hand, this restriction on editing can be extremely helpful if you need to draw a complex filled shape. Assemble the shape from multiple selections, as I have in Figure 3.2. Then you can pour paint into it, apply a gradient to it, or use the Paintbrush with no fear of coloring outside the lines. You can even use the selection to erase a piece of the picture. If I filled the page with color or with an image and selected a shape from within it, I could easily remove the active selected piece by pressing the Backspace/Delete key.
If you copy or paste something onto your canvas, and then try to select a different part of the picture, you might find that the Marquee Tool doesn't work. You might also get a message saying "Could not complete your request because the selected area is empty." This is Photoshop's way of reminding you that you have added another layer to your picture by pasting into it, and the part you're trying to copy isn't on that layer. Look at the Layers palette, and click the layer on which you want to work. Clicking its icon will make it the active layer. You will learn all about working with layers in Hour 11, "Layers."
As useful as the Marquee tools and their modifier keys are, there will come times when you have to select irregular shapes. Perhaps you might need to select a single flower from a bunch or, as in Figure 3.3, remove the headlight from the roadster.
Figure 3.3 Selecting an object with the Lasso.
Using the primary Lasso Tool to select an object in this way requires a steady hand and good hand-eye coordination, as well as a clean mouse and mousepad or trackball. As with the Marquee tools, you can add to your lassoed selection by holding the Shift key and selecting additional parts of the object.
I've found that when I am trying to make a very careful selection with the Lasso Tool, and when I am using Photoshop in general, it helps to slow my mouse down. You can adjust the speed of mouse reaction time in the Mouse section of your machine's Control Panel. Start by setting the slider just a little higher than the slowest setting. Experiment to see what works best for you.
To Do: Create a Selection with the Lasso Tool
To make a selection with the Lasso Tool, follow these steps:
Select the Lasso Tool from the toolbox or press L.
Click and carefully drag the Lasso Tool around the piece of the image you want to select. You see a solid line as you drag.
When you're close to completely enclosing the selection, you can release the mouse button. The two ends of the selection marquee that you have drawn around the shape automatically join together, completing the marquee. If you release the mouse button before you have traced all the way around, the ends of the lasso line will still connect, even if it means drawing a line through the center of the object. If that happens, press and hold the Shift key and use the Lasso Tool again to finish drawing the shape.
The Polygonal Lasso Tool
The Polygonal Lasso Tool behaves in much the same way as the regular Lasso Tool. The difference is, as its name implies, it makes irregular geometric selections. It's actually easier to use when you need to make detailed selections because it can be controlled more easily. Instead of simply dragging a marquee line, as you do with the regular Lasso, you click the Polygonal Lasso to place points, and Photoshop inserts a straight-line marquee between the points. You can place as many points as you need, as close together or far apart as necessary. Figure 3.4 shows the tool in use.
Figure 3.4 The Polygonal Lasso Tool.
To Do: Create a Selection with the Polygonal Lasso Tool
To use the Polygonal Lasso Tool, follow these steps:
Click the Lasso Tool and hold until you see the pop-out menu.
Select the Polygonal Lasso Tool. (You can also do this by skipping step 1 and simply pressing Shift+L until you've selected the tool.)
Click once in the canvas. Now move your mouse. Notice that a line follows your Polygonal Lasso wherever you move it.
Click again. This draws the first line and sets another point from which you can drag. Place another line and click again.
Click to complete your selection.
Now with two lines set, you have an option. You can either continue to select the image, or you can double-click. This automatically finishes the selection for you.
When the cursor nears your starting point, notice that a small circle becomes appended to the cursor. This signals that, if you click, the selection will be completed.
Many of Photoshop's tools, including the Selection tools, have additional options for their use. These are found on the Tool Options bar. Whenever you select a new tool, be sure to look at its options.
The Magnetic Lasso
The Magnetic Lasso is one of my most-used tools. As you drag it around any shape with a reasonably well-defined edge, it snaps to the edge. Select it and use it just as we did the Polygonal Lasso. Because it finds edges by looking for differences in contrast, the Magnetic Lasso is most effective on irregular objects that stand out from the background. You can use the Tool Options bar to set the parameters. Detection width refers to how close to the edge you must be to have the Lasso recognize it (see Figure 3.5). Edge contrast determines how different the pixels must be in brightness value for the Lasso to recognize them. Frequency determines how often the Lasso sets its anchor points. (Anchor points are the points indicated by boxes on a line. Drag them to adjust the line.)
Figure 3.5 Set the edge according to the contrast between the intended selection and what surrounds it.
The software designers at Adobe Systems must not have been able to come up with a more descriptive name for this fantastic tool, choosing instead to let it, perhaps, speak for itselfthe Magic Wand. Maybe it's better that way.
The Magic Wand is a different kind of Selection tool. So far we've looked at tools that select pixels based on their placement in the bitmap (the picture). The Magic Wand selects pixels somewhat differently; it selects them based on color values. This enables you to cut foreground objects, such as the lamp, out of the background. You might need to combine several selections by holding the Shift key, as we are doing in Figure 3.6, to select the entire object.
Figure 3.6 Selections being made with the Magic Wand.
As with the previously described tools, the Magic Wand can make and merge selections if you press the Shift key as you click the areas to select.
The Magic Wand selects adjacent pixels based on color similarities. Its tolerance can be set in the Tool Options bar. Tolerance, in this instance, refers to the Magic Wand's sensitivity to color differences.
The rule is easy to remember: The lower the Tolerance setting, the less tolerance the Magic Wand has for color differences. Thus, for example, if you set the Tolerance higher (it ranges from 0 to 255), it selects all variations of the color that you initially select.
Settings on the Tool Options bar allow you to select everything in the picture that matches the selected color or select only pixels that touch each other. If, for example, you have a picture with several yellow flowers and your Tolerance setting is high, you'll select as much and as many of the flowers as fits the tolerance. If you check Contiguous in the Options palette, you'll select only the parts of the flower you click on that are within the tolerance and have pixels that touch each other. In Figure 3.7, I've set the tolerance to 32, and clicked once on each screen. The screen on the left had Contiguous selected. The one on the right did not.
Figure 3.7 Selecting noncontiguous pixels can save you a lot of time.
The Magic Wand is best used for selecting objects that are primarily one color, such as the flower. It's ideal when you need to select the sky in a landscape. In a few minutes, you'll see exactly how to do this, but first, there are some other selection tricks to learn.