Home > Articles > Certification > CompTIA

  • Print
  • + Share This
This chapter is from the book

5-4 The Router

The router is the most powerful networking device used today to interconnect LANs. The router is a layer 3 device in the OSI model, which means the router uses the network address (layer 3 addressing) to make routing decisions regarding forwarding data packets. Remember from Chapter 1, section 3, that the OSI model separates network responsibilities into different layers. In the OSI model, the layer 3 or network layer responsibilities include handling of the network address. The network address is also called a logical address, rather than being a physical address such as the MAC address. The physical address is the hardware or MAC address embedded into the network interface card. The logical address describes the IP address location of the network and the address location of the host in the network.

Essentially, the router is configured to know how to route data packets entering or exiting the LAN. This differs from the bridge and the layer 2 switch, which use the Ethernet address for making decisions regarding forwarding data packets and only know how to forward data to hosts physically connected to their ports.

Routers are used to interconnect LANs in a campus network. Routers can be used to interconnect networks that use the same protocol (for example, Ethernet), or they can be used to interconnect LANs that are using different layer 2 technologies such as an Ethernet and token ring. Routers also make it possible to interconnect to LANs around the country and the world and interconnect to many different networking protocols.

Routers have multiple port connections for connecting to the LANs, and by definition a router must have a minimum of three ports. The common symbol used to represent a router in a networking drawing is provided in Figure 5-14. The arrows pointing in and out indicate that data enters and exits the routers through multiple ports. The router ports are bidirectional, meaning that data can enter and exit the same router port. Often the router ports are called the router interface, the physical connection where the router connects to the network.

FIGURE 5-14

FIGURE 5-14 The network symbol for a router.

The Router Interface: Cisco 2800 Series

Figure 5-15 shows the rear panel view (interface side) of a Cisco 2800 series router.

FIGURE 5-15

FIGURE 5-15 The rear panel view of a Cisco 2800 series router.

The following describes the function of each interface:

  • USB Interface: The USB ports are used for storage and security support.
  • FastEthernet Ports: FE0/0: Fast Ethernet (10/100Mbps) and FE0/1: Fast Ethernet (10/100Mbps).
  • Console Input: This input provides an RS-232 serial communications link into the router for initial router configuration. A special cable, called a console cable, is used to connect the console input to the serial port on a computer. The console cable can have RJ-45 plugs on each end and requires the use of an RJ-45 to DB9 adapter for connecting to the computer’s COM1 or COM2 serial port. The console cable can also have an RJ-45 connector on one end and an integrated DB9 connector on the other end.
  • Auxiliary Input: This input is used to connect a dial-in modem into the router. The auxiliary port provides an alternative way to remotely log in to the router if the network is down. This port also uses an RJ-45 connection.
  • Serial Interface: CTRLR T1 1 and CTRLR T1 0.

    This is a serial connection, and it has a built-in CSU/DSU. This interface is used to provide a T1 connection to the communications carrier. (Note: The CSU/DSU function is presented in Chapter 8, “Introduction to Switch Configuration.”) This type of connection (RJ-45) replaces the older cabling using V.35 cable (shown later in Figure 5-18). There are three LEDs on this interface:

    • AL—alarm
    • LP—loop
    • CD—Carrier Detect
  • Voice Interface Card (VIC2-4FXO): This interface shows four phone line connections. This router can be programmed as a small Private Branch Exchange (PBX) for use in a small office. The PBX function is presented in Chapter 10, “Internet Technologies: Out to the Internet.”
  • WAN Interface Card (WIC2AM): This interface has two RJ-11 jacks and two V.90 analog internal modems. These modems can be used to handle both incoming and outgoing modem calls. This interface is listed as modem in Figure 5-15.
  • VIC-4FXS/DID: This interface is a four-port FXS and DID voice/fax interface card. FXS is a Foreign Exchange Interface that connects directly to a standard telephone. DID is Direct Inward Dialing and is a feature that enables callers to directly call an extension on a PBX. This interface is listed as FXS/DID in Figure 5-15.

The Router Interface—Cisco 2600 Series

Figure 5-16 shows the rear panel view (interface side) of a Cisco 2600 series router.

FIGURE 5-16

FIGURE 5-16 The rear panel view of a Cisco 2600 series router.

The following describes the function of each interface to the network:

  • Power On/Off: Turns on/off electrical power to the router.
  • Auxiliary Input: Used to connect a dial-in modem into the router. The auxiliary port provides an alternative way to remotely log in to the router if the network is down. This port also uses an RJ-45 connection.
  • Console Input: Provides an RS-232 serial communications link into the router for initial router configuration. A special cable, called a console cable, is used to connect the console input to the serial port on a computer. The console cable uses RJ-45 plugs on each end and requires the use of an RJ-45 to DB9 adapter for connecting to the COM1 or COM2 serial port.
  • Serial Ports: Provides a serial data communication link into and out of the router, using V.35 serial interface cables.
  • DSU Port: This T1 controller port connection is used to make the serial connection to Telco. This module has a built-in CSU/DSU module. There are five LEDs next to the RJ-45 jack. These LEDs are for the following:

    • TD—Transmit Data
    • P—Loop
    • D—Receive Data
    • D—Carrier Detect
    • L—Alarm
  • Ethernet Port: This connection provides a 10/100Mbps Ethernet data link.
  • Analog Modem Ports: This router has a 16-port analog network module.

A media converter is used to convert the 15-pin AUI port to the 8-pin RJ-45 connector. Figure 5-17 shows an example of an AUI to RJ-45 media converter. Media converters are commonly used in computer networks to adapt layer 1 or physical layer technologies from one technology to another. For example:

  • AUI to twisted pair (RJ-45) AUI to fiber
  • RJ-45 to fiber
FIGURE 5-17

FIGURE 5-17 A CentreCom 210TS AUI to RJ-45 media converter.

Figure 5-18 shows a Cisco 7200 series router, which provides adaptable interfaces for connecting to many physical layer technologies such as FastEthernet, gigabit Ethernet, ATM, and FDDI.

FIGURE 5-18

FIGURE 5-18 A Cisco 7200 series router (courtesy of Cisco Systems).

  • + Share This
  • 🔖 Save To Your Account

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020