Multi-Homing--Connecting to Two ISPs
Many organizations depend on Internet connectivity to support critical applications. One popular approach for improving Internet connectivity is to connect to more than one Internet service provider (ISP), a technique called multihoming.
Multihoming can be very effective for ensuring continuous connectivity—eliminating the ISP as a single point of failure—and it can be cost-effective as well. However, your multihoming strategy must be carefully planned to ensure that you actually improve connectivity for your company.
The Need for Physical Diversity
Taking advantage of redundant links requires three conditions:
You must be able to detect when a link has failed.
You must have a mechanism for directing traffic that would normally flow across a failed link to take the path that's still functional.
Meeting the first two conditions only helps to the extent that whatever causes the failure of one link doesn't also result in failure of its backup.
Let's look at the last requirement first; no protocol design will save you if all links have failed. Because most network failures are due to problems in the WAN links, it does little good to connect to a second ISP if both ISP links are carried over the same communications circuit. Even if independent circuits are used, if they're not physically diverse they'll still be subject to common failure events such as construction work inside your building or digging in the street outside. This independence ultimately needs to extend to the physical environment in the data center, where the routers and interfaces should have independent sources of power and be physically separated so that an accident affecting one link won't affect the devices supporting the other.
Providing complete physical diversity is difficult and expensive, and the requirement is not limited to ISP connections. All critical network links for internal communications should also be diversified. Assuming a well designed internal network, the easiest way to achieve physical diversity in your ISP connections is to connect from two different locations that are already well connected to each other, but far enough apart to not share any common facilities or communications infrastructure.