Home > Articles > Certification > Cisco Certification > CCIE

📄 Contents

  1. Section 1: Perimeter Security and Services
  2. Section 2: Intrusion Prevention and Content Security
This chapter is from the book

This chapter is from the book

Section 2: Intrusion Prevention and Content Security

This section covers tasks applicable to some specialized Cisco appliances, the Intrusion Prevention Sensor (IPS) and the Web Services Appliance (WSA). Both devices will be initialized and deployed into the network topology as shown in Diagram 1 and Diagram 2 in Part I. The single IPS appliance will be logically partitioned using various deployment modes of operation to service distinct traffic flows in the network. The WSA will handle redirected traffic of interest via Web Cache Communication Protocol (WCCP) from the Cisco ASA. It is important to verify whether traffic is correctly flowing through the appliances before moving on to other exercises in the lab.

Exercise 2.1: Initialize and Deploy the Cisco IPS Sensor Appliance

The exercise has four tasks.

You will be required to initialize the Cisco Intrusion Prevention Sensor (IPS) appliance and make it accessible from its management interface, and then deploy the sensor in three different interface modes: Inline VLAN pair, Inline Interface pair, and Promiscuous.

The Lab Topology diagram (Diagram 2 in Part I) depicts three IPS devices; however, only one physical IPS sensor exists in the network. This requires you to pay special attention to the switches in the topology to ensure switch ports are correctly configured (switchport modes, VLANs, and so on) to support each of the three logical/virtual sensors (refer to Diagram 1 in Part I).

Use names and details exactly as they appear in the tables.

Task 1: Initialize the Cisco IPS Sensor

Use the parameters in Table 1-11 to complete the task of initializing the sensor.

Table 1-11 Initialization Parameters

Parameter

Settings

Hostname

IPS

Management

Configure the command and control Management0/0 interface in VLAN 101

Sensor IP address

192.168.2.100/24

Default gateway

192.168.2.20

Sensor ACL

192.168.2.0

Telnet

Enable Telnet management

Verify the Cisco IPS sensor configuration using the following:

  • The username and password for the Cisco IPS console are ciscoips and 123cisco123. Do not change them. Use the console to initialize the Cisco IPS sensor appliance using the details in this table.
  • Ensure that the Management0/0 interface is up and functioning (refer to the Lab Topology diagram). You can modify the Cisco Catalyst switch configuration if required.
  • Ensure that the Cisco IPS sensor can ping the default gateway:

    IPS# ping 192.168.2.5
  • Ensure that the following ping and Telnet connection is successful from SW1:

    SW1# telnet 192.168.2.100

Task 2: Deploy the Cisco IPS Sensor in Inline VLAN Pair Mode

Configure the Cisco IPS sensor appliance for the Inline VLAN pair as shown in Table 1-12.

Table 1-12 Inline VLAN Pair Parameters

Parameter

Settings

Virtual Sensor Name

Physical interface

GigabitEthernet0/2

vs0

Inline VLAN pair

Vlan1 70 (VLAN70)

Vlan2 50 (VLAN50)

Task 3: Deploy the Cisco IPS Sensor in Inline Interface Pair Mode

Configure the Cisco IPS sensor appliance for the Inline Interface pair as shown in Table 1-13.

Table 1-13 Inline Interface Pair Parameters

Parameter

Name

Settings

Switch VLANS

Virtual Sensor Name

Interface Pair

ipair

GigabitEthernet0/0,

60

vs1

GigabitEthernet0/1

80

Task 4: Deploy the Cisco IPS Sensor in Promiscuous Mode

  • Configure the Cisco IPS sensor appliance for promiscuous mode on GigabitEthernet 0/3 and assign it to virtual sensor vs2.
  • For the solution and verification information of this lab exercise, see “Solution and Verification for Exercise 2.1: Initialize and Deploy the Cisco IPS Sensor Appliance.”

Exercise 2.2: Initialize the Cisco WSA

The Cisco WSA should be pre-initialized via the CLI with an IP address of 192.168.2.50:8080 and connected via SW1 in VLAN101 as shown in Diagram 2 in Part I.

Using a browser, connect to the WSA and complete the initialization of the Cisco WSA using the system setup wizard as shown in Figure 1-1. The information to be used for system setup is outlined in Table 1-14. Aside from the username and password values, other information in the System Information parameters can be anything.

Figure 1-1

Figure 1-1 WSA System Setup Wizard

Table 1-14 WSA Initialization Parameters

Parameter

Settings

Hostname

wsa.cisco.com

Interfaces

Management (M1) to be used for data and management

IP address

192.168.2.50/24

Default gateway

192.168.2.20

System Information

username: admin; password: ironport; email: fred@foobar.com ; timezone: America/United States/Los Angeles (this will vary)

NTP server

192.168.2.5

DNS

192.168.2.25

L4 Traffic Monitoring

Duplex TAP:T1 (In/Out)

Accept all other defaults.

From ASA1/c1, verify whether you can ping the M1 interface of the Cisco WSA:

ASA1/c1# ping 192.168.2.50

For the solution and verification information of this lab exercise, see “Solution and Verification for Exercise 2.2: Initialize the Cisco WSA.”

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020