Home > Articles > Certification > CompTIA

CompTIA Network+ Cert Guide: Connecting Wirelessly

  • Print
  • + Share This
This chapter introduces WLAN technology, along with various wireless concepts, components, and standards. WLAN design considerations are then presented, followed by a discussion of WLAN security.
This chapter is from the book

This chapter is from the book

After completion of this chapter, you will be able to answer the following questions:

  • How do various wireless LAN (WLAN) technologies function, and what wireless standards are in common use?
  • What are some of the most important WLAN design considerations?
  • What WLAN security risks exist, and how can those risks be mitigated?

The popularity of wireless LANs (WLAN) has exploded over the past decade, allowing users to roam within a WLAN coverage area, allowing users to take their laptops with them and maintain network connectivity as they move throughout a building or campus environment. Many other devices, however, can take advantage of wireless networks, such as gaming consoles, smart phones, and printers.

This chapter introduces WLAN technology, along with various wireless concepts, components, and standards. WLAN design considerations are then presented, followed by a discussion of WLAN security.

Foundation Topics

Introducing Wireless LANs

This section introduces the basic building blocks of WLANs and discusses how WLANs connect into a wired local-area network (LAN). Various design options, including antenna design, frequencies, and communications channels are discussed, along with a comparison of today's major wireless standards, which are all some variant of IEEE 802.11.

WLAN Concepts and Components

Wireless devices, such as laptops and smart phones, often have a built-in wireless card that allows those devices to communicate on a WLAN. But, what is the device to which they communicate? It could be, as one example, another laptop with a wireless card. This would be an example of an ad-hoc WLAN. However, enterprise-class WLANs, and even most WLANs in homes, are configured in such a way that a wireless client connects to some sort of a wireless base station, such as a wireless access point (AP) or a wireless router.

This communication might be done using a variety of antenna types, frequencies, and communication channels. The following sections consider some of these elements in more detail.

Wireless Routers

Consider the basic WLAN topology shown in Figure 8-1. Such a WLAN might be found in a residence whose Internet access is provided by digital subscriber line (DSL) modem. In this topology, a wireless router and switch are shown as separate components. However, in many residential networks, a wireless router integrates switch ports and wireless routing functionality into a single device.

Figure 8-1

Figure 8-1 Basic WLAN Topology with a Wireless Router

In Figure 8-1, the wireless router obtains an IP address via DHCP from the Internet service provider (ISP). Then, the router uses Port Address Translation (PAT), as described in Chapter 6, "Routing Traffic," to provide IP addresses to devices attaching to it wirelessly or through a wired connection. The process through which a wireless client (for example, a laptop or a smart phone) attaches with a wireless router (or wireless AP) is called association. All wireless devices associating with a single AP share a collision domain. Therefore, for scalability and performance reasons, WLANs might include multiple APs.

Wireless Access Point

Although a wireless access point (AP) interconnects a wired LAN with a WLAN, it does not interconnect two networks (for example, the service provider's network with an internal network). Figure 8-2 shows a typical deployment of an AP.

Figure 8-2

Figure 8-2 Basic WLAN Topology with a Wireless AP

The AP connects to the wired LAN, and the wireless devices that connect to the wired LAN via the AP are on the same subnet as the AP (no Network Address Translation [NAT] or PAT is being performed).


The coverage area of a WLAN is largely determined by the type of antenna used on a wireless AP or a wireless router. Although some lower-end, consumer-grade wireless APs have fixed antennas, higher-end, enterprise-class wireless APs often support various antenna types.

Design goals to keep in mind when selecting an antenna include the following:

  • Required distance between an AP and a wireless client
  • Pattern of coverage area (for example, the coverage area might radiate out in all directions, forming a spherical coverage area around an antenna, or an antenna might provide increased coverage in only one or two directions)
  • Indoor or outdoor environment
  • Avoiding interference with other APs

The strength of the electromagnetic waves being radiated from an antenna is referred to as gain, which involves a measurement of both direction and efficiency of a transmission. For example, the gain measurement for a wireless AP's antenna transmitting a signal is a measurement of how efficiently the power being applied to the antenna is converted into electromagnetic waves being broadcast in a specific direction. Conversely, the gain measurement for a wireless AP's antenna receiving a signal is a measurement of how efficiently the received electromagnetic waves arriving from a specific direction are converted back into electricity leaving the antenna.

Gain is commonly measured using the dBi unit of measure. In this unit of measure, the dB stands for decibels and the i stands for isotropic. A decibel, in this context, is a ratio of radiated power to a reference value. In the case of dBi, the reference value is the signal strength (power) radiated from an isotropic antenna, which represents a theoretical antenna that radiates an equal amount of power in all directions (in a spherical pattern). An isotropic antenna is considered to have gain of 0 dBi.

The most common formula used for antenna gain is the following:

  • GdBi = 10 * log10 (G)

Based on this formula, an antenna with a peak power gain of 4 (G) would have a gain of 6.02 dBi. Antenna theory can become mathematical (heavily relying on the use of Maxwell's equations). However, to put this discussion in perspective, generally speaking, if one antenna has 3 dB more gain than another antenna, it has approximately twice the effective power.

Antennas are classified not just by their gain but also by their coverage area. Two broad categories of antennas, which are based on coverage area, are as follows:

  • Omnidirectional: An omnidirectional antenna radiates power at relatively equal power levels in all directions (somewhat similar to the theoretical isotropic antenna). Omnidirectional antennas, an example of which is depicted in Figure 8-3, are popular in residential WLANs and small office/home office (SOHO) locations. key_topic_icon.jpg
    Figure 8-3

    Figure 8-3 Omnidirectional Antenna Coverage

  • Unidirectional: Unidirectional antennas can focus their power in a specific direction, thus avoiding potential interference with other wireless devices and perhaps reaching greater distances than those possible with omnidirectional antennas. One application for unidirectional antennas is interconnecting two nearby buildings, as shown in Figure 8-4. key_topic_icon.jpg
    Figure 8-4

    Figure 8-4 Unidirectional Antenna Coverage

Another consideration for antenna installation is the horizontal or vertical orientation of the antenna. For best performance, if two wireless APs communicate with one another, they should have matching antenna orientations, which is referred to as the polarity of the antenna.

Frequencies and Channels

Later in this chapter, you are introduced to a variety of wireless standards, which are all variants of the IEEE 802.11 standard. As you contrast one standard versus another, a characteristic to watch out for is the frequencies at which these standards operate. Although there are some country-specific variations, certain frequency ranges (or frequency bands) have been reserved internationally for industrial, scientific, and medical purposes. These frequency bands are called the ISM bands, where ISM derives from industrial, scientific, and medical.

Two of these bands are commonly used for WLANs. Specifically, WLANs can use the range of frequencies in the 2.4 GHz–2.5 GHz range (commonly referred to as the 2.4-GHz band) or in the 5.725 GHz–5.875 GHz range (commonly referred to as the 5-GHz band). In fact, some WLANs support a mixed environment, where 2.4 GHz devices run alongside 5-GHz devices.

Within each band are specific frequencies (or channels) at which wireless devices operate. To avoid interference, nearby wireless APs should use frequencies that do not overlap one another. Merely selecting different channels is not sufficient, however, because transmissions on one channel spill over into nearby channels.

As an example, consider the 2.4-GHz band. Here, channel frequencies are separated by 5 MHz (with the exception of channel 14, which has 12 MHz of separation from channel 13). However, a single channel's transmission can spread over a frequency range of 22 MHz. As a result, channels must have five channels of separation (5 * 5 MHz = 25 MHz, which is greater than 22 MHz). You can see from Figure 8-5 that, in the United States, you could select nonoverlapping channels of 1, 6, and 11.

Figure 8-5

Figure 8-5 Nonoverlapping Channels in the 2.4 GHz Band

As a reference, Table 8-1 shows the specific frequencies for each of the channels in the 2.4-GHz band.

Table 8-1. Channel Frequencies in the 2.4-GHz Band


Frequency (GHz)

Recommended as a Nonoverlapping Channel










































Yes (not supported in the United States)

The 5-GHz band has a higher number of channels, as compared to the 2.4-GHz band. Table 8-2 lists the recommended nonoverlapping channels for the 5-GHz band in the United States. Note that additional channels are supported in some countries.

Table 8-2. Nonoverlapping Channels in the 5-GHz Band Recommended for Use in the United States


Frequency (GHz)










































In Chapter 4, "Understanding Ethernet," you learned about Ethernet's carrier sense multiple access collision detection (CSMA/CD) technology. WLANs use a similar technology called carrier sense multiple access collision avoidance (CSMA/CA). Just as CSMA/CD is needed for half-duplex Ethernet connections, CSMA/CA is needed for WLAN connections, because of their half-duplex operation. Similar to how an Ethernet device listens to an Ethernet segment to determine if a frame exists on the segment, a WLAN device listens for a transmission on a wireless channel to determine if it is safe to transmit. Additionally, the collision avoidance part of the CSMA/CA algorithm causes wireless devices to wait for a random backoff time before transmitting.

Transmission Methods

In the previous discussion, you saw the frequencies used for various wireless channels. However, be aware that those frequencies are considered to be the center frequencies of a channel. In actual operation, a channel uses more than one frequency, which is a transmission method called spread spectrum. These frequencies are, however, very close to one another, which results in a narrowband transmission.

The three variations of spread-spectrum technology to be aware of for your study of WLANs include the following:

  • Direct-sequence spread spectrum (DSSS): Modulates data over an entire range of frequencies using a series symbols called chips. A chip is shorter in duration than a bit, meaning that chips are transmitted at a higher rate than the actual data. These chips not only encode the data to be transmitted, but also what appears to be random data. Although both parties involved in a DSSS communication know which chips represent actual data and which chips do not, if a third party intercepted a DSSS transmission, it would be difficult for him to eavesdrop in on the data, because he would not easily know which chips represented valid bits. DSSS is more subject to environmental factors, as opposed to FHSS and OFDM, because of its use of an entire frequency spectrum.
  • Frequency-hopping spread spectrum (FHSS): Allows the participants in a communication to hop between predetermined frequencies. Security is enhanced, because the participants can predict the next frequency to be used while a third party cannot easily predict the next frequency. FHSS can also provision extra bandwidth by simultaneously using more than one frequency.
  • Orthogonal frequency division multiplexing (OFDM): While DSSS used a high modulation rate for the symbols it sends, OFDM uses a relatively slow modulation rate for symbols. This slower modulation rate, combined with the simultaneous transmission of data over 52 data streams, helps OFDM support high data rates while resisting interference between the various data streams.

Of these three wireless modulation techniques, only DSSS and OFDM are commonly used in today's WLANs.

WLAN Standards

Most modern WLAN standards are variations of the original IEEE 802.11 standard, which was developed in 1997. This original standard supported a DSSS and a FHSS implementation, both of which operated in the 2.4-GHz band. However, with supported speeds of 1 Mbps or 2 Mbps, the original 802.11 standard lacks sufficient bandwidth to meet the needs of today's WLANs. The most popular variants of the 802.11 standard in use today are 802.11a, 802.11b, 802.11g, and 802.11n, as described in detail in the following sections.


The 802.11a WLAN standard, which was ratified in 1999, supports speeds as high as 54 Mbps. Other supported data rates (which can be used if conditions are not suitable for the 54 Mbps rate) include 6, 9, 12, 18, 24, 36, and 48 Mbps. The 802.11a standard uses the 5-GHz band and uses the OFDM transmission method. Interestingly, 802.11a never gained widespread adoption, because it was not backwards compatible with 802.11b, while 802.11g was backwards compatible.


The 802.11b WLAN standard, which was ratified in 1999, supports speeds as high as 11 Mbps. However, 5.5 Mbps is another supported data rate. The 802.11b standard uses the 2.4-GHz band and uses the DSSS transmission method.


The 802.11g WLAN standard, which was ratified in 2003, supports speeds as high as 54 Mbps. Like 802.11a, other supported data rates include 6, 9, 12, 18, 24, 36, and 48 Mbps. However, like 802.11b, 802.11g operates in the 2.4-GHz band, which allows it to offer backwards compatibility to 802.11b devices. 802.11g can use either the OFDM or the DSSS transmission method.


The 802.11n WLAN standard, which was ratified in 2009, supports a wide variety of speeds, depending on its implementation. Although the speed of an 802.11n network could exceed 300 Mbps (through the use of channel bonding, as discussed later), many 802.11n devices on the market have speed ratings in the 130–150 Mbps range. Interestingly, an 802.11n WLAN could operate in the 2.4 GHz band, the 5-GHz band, or both simultaneously. 802.11n uses the OFDM transmission method.

One way 802.11n achieves superior throughput is through the use of a technology called multiple input, multiple output (MIMO). MIMO uses multiple antennas for transmission and reception. These antennas do not interfere with one another, thanks to MIMO's use of spatial multiplexing, which encodes data based on the antenna from which the data will be transmitted. Both reliability and throughput can be increased with MIMO's simultaneous use of multiple antennas.

Yet another technology implemented by 802.11n is channel bonding. With channel bonding, two wireless bands can be logically bonded together, forming a band with twice the bandwidth of an individual band. Some literature refers to channel bonding as 40-MHz mode, which refers to the bonding of two adjacent 20-MHz bands into a 40-MHz band.

Table 8-3 acts as a reference to help you contrast the characteristics of the 802.11 standards.


Table 8-3. Characteristics of 802.11 Standards



Max. Bandwidth

Transmission Method

Max. Range


2.4 GHz

1 Mbps or 2 Mbps


20 m indoors/100 m outdoors


5 GHz

54 Mbps


35 m indoors/120 m outdoors


2.4 GHz

11 Mbps


32 m indoors/140 m outdoors


2.4 GHz

54 Mbps


32 m indoors/140 m outdoors


2.4 GHz or 5 GHz (or both)

> 300 Mbps (with channel bonding)


70 m indoors/250 m outdoors

Deploying Wireless LANs

When designing and deploying WLANs, you have a variety of installation options and design considerations. This section delves into your available options and provides you with some best practice recommendations.

Types of WLANs

WLANs can be categorized based on their use of wireless APs. The three main categories are independent basic service set (IBSS), basic service set (BSS), and extended service set (ESS). An IBSS WLAN operates in an ad-hoc fashion, while BSS and ESS WLANs operate in infrastructure mode. The following sections describe the three types of WLANs in detail.


As shown in Figure 8-6, a WLAN can be created without the use of an AP. Such a configuration, called an IBSS, is said to work in an ad-hoc fashion. An ad-hoc WLAN is useful for temporary connections between wireless devices. For example, you might temporarily interconnect two laptop computers to transfer a few files.

Figure 8-6

Figure 8-6 Independent Basic Service Set (IBSS) WLAN


Figure 8-7 depicts a WLAN using a single AP. WLANs that have just one AP are called BSS WLANs. BSS WLANs are said to run in infrastructure mode, because wireless clients connect to an AP, which is typically connected to a wired network infrastructure. A BSS network is often used in residential and SOHO locations, where the signal strength provided by a single AP is sufficient to service all the WLAN's wireless clients.

Figure 8-7

Figure 8-7 Basic Service Set (BSS) WLAN


Figure 8-8 illustrates a WLAN using two APs. WLANs containing more than one AP are called ESS WLANs. Like BSS WLANs, ESS WLANs operate in infrastructure mode. When you have more than one AP, take care to prevent one AP from interfering with another. Specifically, the previously discussed nonoverlapping channels (channels 1, 6, and 11 for the 2.4-GHz band) should be selected for adjacent wireless coverage areas.

Figure 8-8

Figure 8-8 Extended Service Set (ESS) WLAN

Sources of Interference

A major issue for WLANs is radio frequency interference (RFI) caused by other devices using similar frequencies to the WLAN devices. Also, physical obstacles can impede or reflect WLAN transmissions. The following are some of the most common sources of interference:

  • Other WLAN devices: Earlier in this chapter, you read about nonoverlapping channels for both the 2.4-GHz and 5-GHz bands. However, if two or more WLAN devices are in close proximity and use overlapping channels, those devices could interfere with one another.
  • Cordless phones: Several models of cordless phones operate in the 2.4-GHz band and can interfere with WLAN devices. However, if you need cordless phones to coexist in an environment with WLAN devices using the 2.4-GHz band, consider the use of digital enhanced cordless telecommunications (DECT) cordless phones. Although the exact frequencies used by DECT cordless phones vary based on country, DECT cordless phones do not use the 2.4-GHz band. For example, in the United States, DECT cordless phones use frequencies in the range 1.92 GHz–1.93 GHz.
  • Microwave ovens: Older microwave ovens, which might not have sufficient shielding, can emit relatively high-powered signals in the 2.4-GHz band, resulting in significant interference with WLAN devices operating in the 2.4-GHz band.
  • Wireless security system devices: Most wireless security cameras operate in 2.4-GHz frequency range, which can cause potential issues with WLAN devices.
  • Physical obstacles: In electromagnetic theory, radio waves cannot propagate through a perfect conductor. So, although metal filing cabinets and large appliances are not perfect conductors, they are sufficient to cause degradation of a WLAN signal. For example, a WLAN signal might hit a large air conditioning unit, causing the radio waves to be reflected and scattered in multiple directions. Not only does this limit the range of the WLAN signal, but radio waves carrying data might travel over different paths. This multipath issue can cause data corruption.
  • Signal strength: The range of a WLAN device is a function of the device's signal strength. Lower-cost consumer-grade APs do not typically allow an administrative adjustment of signal strength. However, enterprise-class APs often allow signal strength to be adjusted to assure sufficient coverage of a specific area, while avoiding interference with other APs using the same channel.

As you can see from this list, most RFI occurs in the 2.4-GHz band as opposed to the 5-GHz band. Therefore, depending on the wireless clients you need to support, you might consider using the 5-GHz band, which is an option for 802.11a and 802.11n WLANs.

Wireless AP Placement

WLANs using more than one AP (an ESS WLAN) require careful planning to prevent the APs from interfering with one another, while still servicing a desired coverage area. Specifically, an overlap of coverage between APs should exist to allow uninterrupted roaming from one WLAN cell (which is the coverage area provided by an AP) to another. However, those overlapping coverage areas should not use overlapping frequencies.

Figure 8-9 shows how nonoverlapping channels in the 2.4-GHz band can overlap their coverage areas to provide seamless roaming between AP coverage areas. A common WLAN design recommendation is to have a 10–15 percent overlap of coverage between adjoining cells.

Figure 8-9

Figure 8-9 10–15 Percent Coverage Overlap in Coverage Areas for Nonoverlapping Channels

If a WLAN has more than three APs, the APs can be deployed in a honeycomb fashion to allow an overlap of AP coverage areas while avoiding an overlap of identical channels. The example shown in Figure 8-10 shows an approach to channel selection for adjoining cells in the 2.4-GHz band. Notice that cells using the same nonoverlapping channels (channels 1, 6, and 11) are separated by another cell. For example, notice that none of the cells using channel 11 overlap another cell using channel 11.

Figure 8-10

Figure 8-10 Nonoverlapping Coverage Cells for the 2.4-GHz Band

Securing Wireless LANs

WLANs introduce some unique concerns to your network. For example, improperly installed wireless APs are roughly equivalent to putting an Ethernet port in a building's parking lot, where someone can drive up and access to your network. Fortunately, a variety of features are available to harden the security of your WLAN, as discussed in this section.

Security Issues

In the days when dial-up modems were popular, malicious users could run a program on their computer to call all phone numbers in a certain number range. Phone numbers that answered with modem tone became targets for later attacks. This type of reconnaissance was known as war dialing. A modern-day variant of war dialing is war driving, where potentially malicious users drive around looking for unsecured WLANs. These users might be identifying unsecured WLANs for nefarious purposes or simply looking for free Internet access.

Other WLAN security threats include the following:

  • Warchalking: Once an open WLAN (or a WLAN whose SSID and authentication credentials are known) is found in a public place, a user might write a symbol on a wall (or some other nearby structure), to let others know the characteristics of the discovered network. This practice, which is a variant of the decades-old practice of hobos leaving symbols as messages to fellow hobos, is called warchalking. Figure 8-11 shows common warchalking symbols.
    Figure 8-11

    Figure 8-11 Warchalking Symbols

  • WEP and WPA security cracking: As discussed later in this chapter, various security standards are available for encrypting and authenticating a WLAN client with an AP. Two of the less secure standards include Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA). Although WPA is considered more secure than WEP, utilities are available on the Internet for cracking each of these approaches to wireless security. By collecting enough packets transmitted by a secure AP, these cracking utilities can use mathematical algorithms to determine the preshared key (PSK) configured on a wireless AP, with which an associating wireless client must also be configured.
  • Rogue access point: A malicious user could set up his own AP to which legitimate users would connect. Such an AP is called a rogue access point. That malicious user could then use a packet sniffer (which displays information about unencrypted traffic, including the traffic's data and header information) to eavesdrop on communications flowing through their AP. To cause unsuspecting users to connect to the rogue AP, the malicious user could configure the rogue AP with the same service set identifier (SSID) as used by a legitimate AP. When a rogue AP is configured with the SSID of legitimate AP, the rogue AP is commonly referred to as an evil twin.

Approaches to WLAN Security

A WLAN that does not require any authentication or provide any encryption for wireless devices (for example, a publicly available WLAN found in many airports) is said to be using open authentication. To protect WLAN traffic from eavesdroppers, a variety of security standards and practices have been developed, including the following:

  • MAC address filtering: An AP can be configured with a listing of MAC addresses that are permitted to associate with the AP. If a malicious user attempts to connect via his laptop (whose MAC address is not on the list of trusted MAC addresses), that user is denied access. One drawback to MAC address filtering is the administrative overhead required to keep an approved list of MAC addresses up-to-date. Another issue with MAC address filtering is that a knowledgeable user could falsify the MAC address of his wireless network card, making his device appear to be approved.
  • Disabling SSID broadcast: An SSID can be broadcast by an AP to let users know the name of the WLAN. For security purposes, an AP might be configured not to broadcast its SSID. However, knowledgeable users could still determine the SSID of an AP by examining captured packets.
  • Preshared key: To encrypt transmission between a wireless client and an AP (in addition to authenticating a wireless client with an AP), both the wireless client and the AP could be preconfigured with a matching string of characters (a preshared key [PSK], as previously described). The PSK could be used as part of a mathematical algorithm to encrypt traffic, such that if an eavesdropper intercepted in the encrypted traffic, he would not be able to decrypt the traffic without knowing the PSK. Although using a PSK can be effective in providing security for a small network (for example, a SOHO network), it lacks scalability. For example, in a large corporate environment, a PSK being compromised would necessitate the reconfiguration of all devices configured with that PSK.
  • IEEE 802.1X: Rather than having all devices in a WLAN be configured with the same PSK, a more scalable approach is to require all wireless users to authenticate using their own credentials (for example, a username and password). Allowing each user to have his own set of credentials prevents the compromising of one password from impacting the configuration of all wireless devices. IEEE 802.1x is a technology that allows wireless clients to authenticate with an authentication server (typically, a Remote Authentication Dial-In User Service [RADIUS] server).

Chapter 4 discussed IEEE 802.1x in detail and described the role of a supplicant, an authenticator, and an authentication server; however, Chapter 4 showed how IEEE 802.1x was used in a wired network. Figure 8-12 shows a wireless implementation of IEEE 8021x.

Figure 8-12

Figure 8-12 IEEE 802.1x Security for a WLAN

Security Standards

When configuring a wireless client for security, the most common security standards from which you can select are as follows:

  • Wired Equivalent Privacy (WEP)
  • Wi-Fi Protected Access (WPA)
  • Wi-Fi Protected Access version 2 (WPA2)

The following sections describe these standards in detail.


The original 802.11 standard did address security; however, the security was a WEP key. With WEP, an AP is configured with a static WEP key. Wireless clients needing to associate with an AP are configured with an identical key (making this a PSK approach to security). The 802.11 standard specifies a 40-bit WEP key, which is considered to be a relatively weak security measure.

Because a WEP key is a static string of characters, it could be compromised with a brute-force attack, where an attacker attempts all possible character combinations until a match for the WEP key is found. Another concern, however, is that WEP uses RC4 as its encryption algorithm.

RC4 uses a 24-bit initialization vector (IV), which is a string of characters added to the transmitted data, such that the same plain text data frame will never appear as the same WEP-encrypted data frame. However, the IV is transmitted in clear text. So, if a malicious user, using packet-capture software, captures enough packets having the same WEP key, and because the malicious user can see the IV in clear text, he can use a mathematical algorithm (which can be performed with WEP-cracking software found on the Internet) to determine the static WEP key.

Some WEP implementations support the use of a longer WEP key (for example, 128 bits instead of 40 bits), making a WEP key more difficult to crack; however, both the wireless clients and their AP must support the longer WEP key.


The Wi-Fi Alliance (a nonprofit organization formed to certify interoperability of wireless devices) developed its own security standard, WPA, to address the weaknesses of WEP. Some of the security enhancements offered by WPA include the following:

  • WPA operating in enterprise mode can require a user to be authenticated before keys are exchanged.
  • In enterprise mode, the keys used between a wireless client and an access point are temporary session keys.
  • WPA uses Temporal Key Integrity Protocol (TKIP) for enhanced encryption. Although TKIP does rely on an initialization vector, the IV is expanded from WEP's 24-bit IV to a 48-bit IV. Also, broadcast key rotation can be used, which causes a key to change so quickly, an eavesdropper would not have time to exploit a derived key.
  • TKIP leverages Message Integrity Check (MIC), which is sometimes referred to as Message Integrity Code (MIC). MIC can confirm that data was not modified in transit.

Although not typically written as WPA1, when you see the term WPA, consider it to be WPA version 1 (WPA1). WPA version 2, however, is written as WPA2.


In 2004, the IEEE 802.11i standard was approved, and required stronger algorithms for encryption and integrity checking than those seen in previous WLAN security protocols such as WEP and WPA. The requirements set forth in the IEEE 802.11i standard are implemented in the Wi-Fi Alliance's WPA version 2 (WPA2) security standard. WPA2 uses Counter Mode with Cipher Block Chaining Message Authentication Code Protocol (CCMP) for integrity checking and Advanced Encryption Standard (AES) for encryption.


The main topics covered in this chapter are the following:

  • Various components, technologies, and terms used in WLANs were identified.
  • WLAN design considerations were presented, such as the selection of WLAN standards, bands, and nonoverlapping channels. Potential sources of interference were also identified.
  • Some of the security risks posed by a WLAN were described and the technologies available for mitigating those risks were presented.
  • + Share This
  • 🔖 Save To Your Account

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.


Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.


If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information

Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.


This site is not directed to children under the age of 13.


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information

If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information

Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure

Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact

Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice

We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020