Home > Articles > Certification > Cisco Certification > CCNA

This chapter is from the book

Enter the Switch

Today, Layer 1 repeaters and hubs and Layer 3 routers are used extensively in networking, but we do not hear much about Layer 2 bridges. The reason is that to a large extent bridges have been replaced. Remember that bridges read the entire frame, check it for accuracy, and then forward or drop it depending on the bridge's address tables. Also remember that this took time, and in highly populated networks a store and forward device like the bridge could actually become a bottleneck. So a couple of engineering types reasoned that to perform a bridging function it was only necessary to read the source and destination address from the beginning of the frame.

Based on this, a decision to drop or forward could be made and address tables could be populated. Well, the cost of high-speed memory and processors had dropped so much that rather than apply this approach to existing bridges and gain an incremental speed advantage, it was decided that the time was right to come out with a whole new class of device.

The new device read the source and destination address of the frame, populated its bridging tables, and either passed or dropped the frame based on this information. Sounds just like a bridge doesn't it? Well, here is where the plot thickens. Instead of connecting just two segments, the new device connected six or more. Forwarding a frame entailed building a virtual circuit between two segments and then once the frame was passed the circuit could be used to connect two other segments. Now if you had six segments you would only need to run three virtual circuits to connect all of the segments. Or, if you only had one virtual circuit, you could switch it between segments at three times LAN speed and accomplish the same thing, namely a non-blocking switch. (See why the high-speed processors and memory were needed?)

The term non-blocking means a device has the capacity to forward frames between all possible segments at the same time. In short, if there is a bottleneck in the network it won't be the switch. Each port connecting to a segment maintained its own bridging table and when forwarding to another segment, the frame was moved to what is often called the switching matrix. The switching matrix established a virtual circuit between the two segments for just enough time for the frame to transit the matrix to the destination segment. The device was called a Layer 2 switch and its meteoric rise in popularity was only exceeded by a plummet in popularity of the bridge.

But was there a downside to the capacity of the Layer 2 switch? At first the answer appeared to be no, but then it was noticed that when a switched network began to reach capacity, its operation became strangely erratic. It turned out the key to the erratic behavior was linked to the very thing that gave the Layer 2 switch its awesome capacity and speed.

The bridge read the entire frame and checked the CRC to ensure the frame was complete and accurate before passing it on. The switch, however, only read the source and destination address from the beginning of the frame. So only the first few bytes of the frame would need to survive a collision to be passed on to another segment. This did not become a problem until the segment approached saturation. As the number of collisions rose, the switch would begin passing a significant number of damaged frames. In essence, the switch was creating a different collision domain every time it set up a virtual circuit and those collision domains were changing so fast it was almost impossible to diagnose.

Most switches were put in environments that would never get close to saturation, and in these situations they performed beautifully. Unfortunately, the erratic performance usually occurred in large complex networks and it became enough of a problem to prompt a redesign of the switch.

The first generation of switches became known as cut-through switches. The second generation switch implemented a full store and forward operation identical to the original bridges and accordingly was called a store and forward switch. However, the store and forward technology came at the expense of speed and price. So you could have a fast and cheap switch that would work fine in some situations or a slow expensive switch that would work in all situations. Seems like a compromise was needed, doesn't it? The compromise, which was developed by Cisco, is called a fragment-free switch. A fragment-free switch reads the first 64 bytes of the frame. Statistically, there is over a 90% chance the remainder of the frame is intact if the first 64 bytes are. Cisco takes the best of all three approaches by offering switches that can be configured to operate in any of the three modes.

NOTE

Everybody knows a switch is a Layer 2 device. A switch works with MAC addresses so the only thing it could be is a Layer 2 device. However, Cisco has a very popular line of products that apply the fast switching matrix of Layer 2 to the routing of packets at Layer 3. Do you know what Cisco calls those devices? You guessed it, "switches"!

Terms are always evolving at Cisco. The term "switch," in this case, is moving from the generic name of a device to the description of a technology. So be careful of the assumptions you bring with you to the test. Your assumptions are probably not wrong, but they may be very different from the way Cisco sees the world. Enough said?

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020