< Back
Page 5 of 5
This chapter is from the book
REFERENCES
[1] Crochiere, R.E. and Rabiner, L.R.
"Optimum FIR Digital Implementations for Decimation, Interpolation, and Narrow-band Filtering,"
IEEE Trans. on Acoust. Speech, and Signal Proc., Vol. ASSP-23, No. 5, October 1975."Digital Beamforming Antennas,"
Microwave Journal, January 1987."The Benefits of Undersampling,"
Electronic Design, July 11, 1994."Development of a 60-channel FDM-TDM Transmultiplexer,"
COMSAT Technical Review, Vol. 13, No. 1, Spring 1983."Dual-Channel Space Quadrature-Interferometer System,"
Microwave System Designer's Handbook, Fifth Edition, Microwave Systems News, 1987."How Fast Must You Sample,"
Test and Measurement World, November 1988.[7] Stremler, F. Introduction to Communication Systems, Chapter 3, Second Edition, Addison Wesley Publishing Co., Reading, Massachusetts, p. 125.
"IF Signal Sampling Improves Receiver Detection Accuracy,"
Microwaves & RF, March 1989.[9] Haykin, S. Communications Systems, Chapter 7, John Wiley and Sons, New York, 1983, p. 376.
[10] Feldman, C. B., and Bennett, W. R.
"Bandwidth and Transmission Performance,"
Bell System Tech. Journal, Vol. 28, 1989, p. 490.[11] Panter, P. F. Modulation Noise, and Spectral Analysis, McGraw-Hill, New York, 1965, p. 527.
[12] Shanmugam, K. S. Digital and Analogue Communications Systems, John Wiley and Sons, New York, 1979, p. 378.
[13] Vaughan, R., Scott, N. and White, D.
"The Theory of Bandpass Sampling,"
IEEE Trans. on Signal Processing, Vol. 39, No. 9, September 1991, pp. 19731984.[14] Xenakis B., and Evans, A.
"Vehicle Locator Uses Spread Spectrum Technology,"
RF Design, October 1992.
< Back
Page 5 of 5