Home > Articles

Learn 3D Modeling Basics with Tinkercad

  • Print
  • + Share This
This chapter teaches the components necessary for a simple 3D model. Upon completion you will have learned many of the standard features that Tinkercad offers for 3D modeling.
This chapter is from the book

It’s time to start digging a bit deeper into the workings of Tinkercad, and the best way to learn about this amazing tool is to get hands-on with it. Now, before you can go and create your own amazing models, you’ve got to realize that there are a lot of basic skills you’ll need to master first. This doesn’t mean you can’t create some 3D models right now, however. It just means that it might take you a little bit longer.

The better way to learn Tinkercad is to start slow and first learn how to use its most basic tools and features. An even better way to learn Tinkercad is to create an actual model as you’re learning the ins and outs of the application. And that’s exactly what this chapter is all about. By the end of this chapter, you’ll have created all the components necessary for a simple 3D model and you will have learned many (but not all) of the standard features that Tinkercad offers. To show you how to make the parts of a simple 3D model, I’ve picked a fun little rocket for you to build. Go ahead and open up Tinkercad, log in, and click the Create New Design button on the Dashboard.

The Launchpad

This first model is simple. You’ll be using basic shapes to create a model of a small toy rocket, preparing to launch. You’ll need to create the pieces for both the launchpad and the rocket—starting with a launchpad that’s sitting on a tiny piece of land. The first thing you’re going to want to do is create that small piece of land. As you can see in Figure 4.1, I’m zoomed in quite a bit on the workspace. I need to zoom out a bit so I can see the entire workspace.

FIGURE 4.1

FIGURE 4.1 You can zoom in and out on the workspace.

To zoom in and out, you can use the + and – buttons indicated in Figure 4.1. A few taps on the – button shrinks the workspace a bit so you can see all of its boundaries, as shown in Figure 4.2.

FIGURE 4.2

FIGURE 4.2 Zooming out to see the workspace boundaries.

Click the + button to zoom in and see more detail on a model. If you’re using a mouse that has a mouse wheel on top, you can also scroll it away from you to zoom in and toward you to zoom out. Finally, if you’re using a Mac touchpad, you can swipe two fingers down to zoom in and swipe two fingers up to zoom out.

Go ahead and drop a piece of the launchpad on the screen. To do this, you need to click, hold, and drag a copy of the red box onto the workspace. You can find the red box shape in the Geometric section of the toolbar that runs down the right side of the screen, as shown in Figure 4.3. If you don’t see the red box, click the word Geometric to open the list of geometric shapes.

FIGURE 4.3

FIGURE 4.3 Dragging a red box object onto the workspace.

When you drop a shape on the workspace, it may or may not appear with various controls around it, such as arrows or tiny white boxes in the corners. When an object is selected, a few controls appear on and around it. In Figure 4.4, I’ve zoomed in on the box from Figure 4.3 so you can see these controls in more detail. If you don’t see the controls on your screen, simply click the red box, and they appear.

FIGURE 4.4

FIGURE 4.4 Controls allow you to manipulate an object.

You’ve dropped a box object onto the workspace, but it might not completely look like one from the angle shown in Figure 4.4. It would be nice to rotate the workplane a bit so it’s a more obvious that this is a box. To do this, you can use the rotate controls shown in Figure 4.5. Likewise, if you’re a mouse user, you can either press and hold both mouse buttons simultaneously while moving the mouse to see the workspace move or press and hold the middle (wheel) button; test both to see which works for you. Mac users can press and hold two fingers on a touchpad to achieve the same result.

FIGURE 4.5

FIGURE 4.5 Using the rotate controls to change the view of the workspace.

Find a suitable angle to view the box object and then click on the box object to select it so the controls are visible once again, as shown in Figure 4.6.

FIGURE 4.6

FIGURE 4.6 The controls on the selected box object.

Compare the controls shown in Figure 4.4 to those shown in Figure 4.6. With a simple shift of the workspace view, you should now see in Figure 4.6 that there are three rotate arrows surrounding the box instead of just the two shown in Figure 4.4.

You’ll learn about the rotate arrow controls in Chapter 5, “Putting Together a Model,” but for now I want you to focus on the small white dots that are visible in the bottom corners of the box object.

Move your mouse pointer over any white dot, and a measurement appears. Some dots, such as the one in Figure 4.7, displays two measurements.

FIGURE 4.7

FIGURE 4.7 White dot controls display measurements.

As you can see in Figure 4.7, the length and width of this box object are both 20mm (millimeters). This means the base of this box is a square. You can check the height of the box by clicking the white dot control on the very top of the box: Move your mouse pointer over it as shown in Figure 4.8, and the height measurement appears.

FIGURE 4.8

FIGURE 4.8 The top white dot control reports the height measurement.

Because the height is also 20mm, you’re looking at a perfect cube. But a cube isn’t the best place to launch a rocket. You’re going to modify the cube so it’s very flat and a bit larger, and you’ll do it by clicking and dragging on those white dot controls.

Let’s start with the height. Click and hold on the white dot on top of the cube while dragging down. Watch as the cube begins to flatten in size, and the height measurement value decreases. Notice also that the length and width remain the same: 20mm. Shrink the box object’s height to 1mm and stop. Your box object should now look like the one in Figure 4.9.

FIGURE 4.9

FIGURE 4.9 Flatten the box object by dragging down on the top white dot control.

You can verify the height at any time by hovering your mouse pointer over the top white dot control again. Once you’re satisfied that the height is 1mm, click and drag on one of the white dot controls that make up the corners of the box object until the object’s length and width values are both 100mm. When using one of the corner white dot controls, you can change both the length and width at the same time. Experiment a bit and see how moving the mouse pointer while clicking and holding down on a white box lets you change the length and width simultaneously.

Your box shape should end up looking like the one in Figure 4.10, at 100mm in both length and width and 1mm in height.

FIGURE 4.10

FIGURE 4.10 The rocket’s launchpad is done.

In Figure 4.10, the launchpad extends beyond the workspace. This isn’t a problem, but it can affect your view when you zoom in and out of the workspace. Ideally, you want to try to keep your models within the boundaries of the workplane for easier viewing. To move an object such as the flattened launchpad, simply click and hold on any part of the object’s surface (but not on any of its controls) and drag it and release it where you want it.

This is a good time to point out just how easy it is to change the color of a selected object. When you have an object (such as the launchpad) selected, click the Color button indicated in Figure 4.11 and pick a new color. (You can use the Custom link to create a unique color if you like.) Figure 4.11 shows that I’ve changed the launchpad’s color to green and centered the object in the middle of the workplane.

FIGURE 4.11

FIGURE 4.11 You can drag and drop model pieces anywhere on the workspace.

Before you move on to creating the pieces of the rocket, I want to give you some more practice with dropping objects on the workplane and modifying their sizes. To get this practice, you can create the launch scaffolding. This will consist of three pieces that will eventually be stacked. Just create four blue objects using the box shape object and give them these dimensions (length x width x height):

  • Scaffold1: 10mm x 10mm x 10mm
  • Scaffold2: 7mm x 7mm x 20mm
  • Scaffold3: 4mm x 4mm x 15mm
  • Scaffold4: 30mm x 5mm x 2mm

Drag and drop these launchpad scaffolding pieces around the edges of the workspace, as shown in Figure 4.12. You’ll put these together in Chapter 5, along with the pieces of the rocket that you’ll be creating next.

FIGURE 4.12

FIGURE 4.12 The scaffolding pieces, sized and ready for assembly.

  • + Share This
  • 🔖 Save To Your Account

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020