Home > Articles > Networking

  • Print
  • + Share This
This chapter is from the book

This chapter is from the book

Cisco Enterprise Architecture Model (1.2.2)

The Cisco Enterprise Architecture is a modular approach to network design. This topic discusses the enterprise campus module, enterprise edge module, and the service provider edge module.

Cisco Enterprise Architecture Model (

To accommodate the need for modularity in network design, Cisco developed the Cisco Enterprise Architecture model. This model provides all the benefits of the hierarchical network design on the campus infrastructure, and facilitates the design of larger, more scalable networks.

The Cisco Enterprise Architecture model separates the enterprise network into functional areas that are referred to as modules. The modularity that is built in to the architecture allows flexibility in network design and facilitates implementation and troubleshooting.

As shown in Figure 1-14, the following are the primary Cisco Enterprise Architecture modules:

  • Enterprise campus
  • Enterprise edge
  • Service provider edge

    Figure 1-14

    Figure 1-14 Cisco Enterprise Architecture Modules

Connected to the service provider edge are the remote modules, including

  • Enterprise branch
  • Enterprise teleworker
  • Enterprise data center

Cisco Enterprise Campus (

A campus network is a building or group of buildings connected into one enterprise network that consists of many LANs. A campus is generally limited to a fixed geographic area, but it can span several neighboring buildings (for example, an industrial complex or business park environment). Regional offices, SOHOs, and mobile workers may need to connect to the central campus for data and information.

The enterprise campus module describes the recommended methods to create a scalable network while addressing the needs of campus-style business operations. The architecture is modular and can easily expand to include additional campus buildings or floors as the enterprise grows.

As shown in Figure 1-15, the enterprise campus module consists of the following submodules:

  • Building access
  • Building distribution
  • Campus core
  • Data center

    Figure 1-15

    Figure 1-15 Enterprise Campus Module

Together these submodules

  • Provide high availability through a resilient hierarchical network design
  • Integrate IP communications, mobility, and advanced security
  • Utilize multicast traffic and QoS to optimize network traffic
  • Provide increased security and flexibility using access management, VLANs, and IPsec VPNs

The enterprise campus module architecture provides the enterprise with high availability through a resilient multilayer design, redundant hardware and software features, and automatic procedures for reconfiguring network paths when failures occur. Integrated security protects against and mitigates the impact of worms, viruses, and other attacks on the network, even at the switch port level.

A high-capacity, centralized data center module can provide internal server resources to users. The data center module typically also supports network management services for the enterprise, including monitoring, logging, troubleshooting, and other common management features from end to end. The data center submodule typically contains internal email and corporate servers that provide application, file, print, email, and Domain Name System (DNS) services to internal users.

Cisco Enterprise Edge (

The enterprise edge module provides connectivity for voice, video, and data services outside the enterprise. This module often functions as a liaison between the enterprise campus module and the other modules.

As shown in Figure 1-16, the enterprise edge module consists of submodules providing

  • E-commerce services
  • Internet connectivity
  • Remote access and VPN access
  • WAN site-to-site VPN access

    Figure 1-16

    Figure 1-16 Enterprise Edge Submodules

Specifically, these submodules consist of:

  • E-commerce networks and servers: The e-commerce submodule enables enterprises to support e-commerce applications through the Internet. It uses the high-availability designs of the data center module. Devices located in the e-commerce submodule include web, application, and database servers; firewall and firewall routers; and network intrusion prevention systems (IPS).
  • Internet connectivity and demilitarized zone (DMZ): The Internet submodule of the enterprise edge provides internal users with secure connectivity to Internet services such as public servers, email, and DNS. Connectivity to one or several Internet service providers (ISPs) is also provided. Components of this submodule include firewall and firewall routers, Internet edge routers, FTP and HTTP servers, SMTP relay servers, and DNS servers.
  • Remote access and VPN: The VPN/remote access submodule of the enterprise edge provides remote-access termination services, including authentication for remote users and sites. Components of this submodule include firewalls, dial-in access concentrators, Cisco Adaptive Security Appliances (ASA), and network intrusion prevention system (IPS) appliances.
  • WAN: The WAN submodule uses various WAN technologies for routing traffic between remote sites and the central site. Enterprise WAN links include technologies such as Multiprotocol Label Switching (MPLS), Metro Ethernet, leased lines, Synchronous Optical Network (SONET) and Synchronous Digital Hierarchy (SDH), PPP, Frame Relay, ATM, cable, digital subscriber line (DSL), and wireless.

Service Provider Edge (

Enterprises use service providers (SPs) to link to other sites. As shown in Figure 1-17, the SP edge module can include

  • Internet service providers (ISPs)
  • WAN services such as Frame Relay, ATM, and MAN
  • Public switched telephone network (PSTN) services

    Figure 1-17

    Figure 1-17 Service Provider Edge Module

The SP edge provides connectivity between the enterprise campus module to the remote enterprise data center, enterprise branch, and enterprise teleworker modules.

The SP edge module

  • Spans across large geographic areas in a cost effective manner
  • Converges voice, video, and data services over a single IP communications network
  • Supports QoS and service level agreements
  • Supports security using VPNs (IPsec / MPLS) over Layer 2 and Layer 3 WANs

When acquiring Internet services from an ISP, redundancy or failover should be considered. Redundant Internet connections vary depending if the enterprise is connecting to a single ISP or multiple ISPs.

As shown in Figure 1-18, redundant connections to a single ISP can include

  • Single-homed: A single connection to an ISP
  • Dual-homed: Two or more connections to a single ISP

    Figure 1-18

    Figure 1-18 Connecting to a Single ISP

Alternatively, it is possible to set up redundancy using multiple ISPs, as shown in

Figure 1-19. Options for connecting to multiple ISPs include

  • Multihomed: Connections to two or more ISPs
  • Dual-multihomed: Multiple connections to two or more ISPs

    Figure 1-19

    Figure 1-19 Connecting to Multiple ISPs

Remote Functional Area (

The remote functional area is responsible for remote connectivity options and includes the following modules, as shown in Figure 1-20.

Figure 1-20

Figure 1-20 Remote Connectivity Areas

Enterprise Branch

The enterprise branch module includes remote branches that allow employees to work at noncampus locations. These locations are typically responsible for providing security, telephony, and mobility options to employees, as well as general connectivity into the campus network and the different components located inside the enterprise campus. The enterprise branch module allows enterprises to extend head-office applications and services, such as security, Cisco Unified Communications, and advanced application performance, to the remote branches. The edge device connecting the remote site to the central site varies depending on the needs and size of the site. Large remote sites may use high-end Cisco Catalyst switches, while smaller sites may use an ISR G2 router. These remote sites rely on the SP edge to provide services and applications from the main site. In Figure 1-20, the enterprise branch module connects to the enterprise campus site primarily using a WAN link. However, it also has an Internet link as a backup. The Internet link uses site-to-site IPsec VPN technology to encrypt corporate data.

Enterprise Teleworker

The enterprise teleworker module is responsible for providing connectivity for workers who operate out of different geographically dispersed locations, including home offices, hotels, or customer/client sites. The teleworker module recommends that mobile users connect to the Internet using the services of a local ISP, such as cable modem or DSL. VPN services can then be used to secure communications between the mobile worker and central campus. Integrated security- and identity-based networking services enable the enterprise to extend campus security policies to the teleworker. Staff can securely log in to the network over the VPN and gain access to authorized applications and services from a single cost-effective platform.

Enterprise Data Center

The enterprise data center module is a data center with all of the same functional options as a campus data center, but exists at a remote location. This provides an added layer of security as the offsite data center can provide disaster recovery and business continuance services for the enterprise. High-end switches such as the Cisco Nexus series switch use fast WAN services such as Metro Ethernet (MetroE) to connect the enterprise campus to the remote enterprise data center. Redundant data centers provide backup using synchronous and asynchronous data and application replication. Additionally, the network and devices offer server and application load balancing to maximize performance. This solution allows the enterprise to scale without major changes to the infrastructure.

  • + Share This
  • 🔖 Save To Your Account