Home > Articles

Installing Windows Server 2003

This chapter is from the book

In This Chapter

  • Preplanning and Preparing a Server Installation

  • Setting Up the Windows Server 2003 Operating System

  • Upgrading to Windows Server 2003

  • Using Alternative Methods of Installation

  • Performing an Unattended Windows Server 2003 Installation

  • Installing Windows Server 2003 from an Image

  • Installing Windows Server 2003 with Group Policy and SMS

This chapter describes the process for installing the Microsoft Windows Server 2003 operating system. With the advances in Microsoft technologies over the years, many steps in the installation process have been simplified. For example, you still must verify that your hardware is supported by the operating system, but the Plug and Play capability of the application automatically detects and configures most hardware items. Thankfully, the days of determining the IRQ, base I/O address, and memory range of your system devices are, for the most part, in the past. In fact, Windows Server 2003 has the easiest and most intuitive installation procedure of any Microsoft operating system to date.

The server, however, will not install itself. You still must make several decisions to ensure that your completed installation will meet your needs. This chapter walks you through these key decisions and helps you make the correct choices for your environment.

Preplanning and Preparing a Server Installation

Before you begin the actual installation of Windows Server 2003, you must make several decisions. How well you plan these steps will determine how successful your installation is.

Verifying Minimum Hardware Requirements

The first step of the installation is verifying that your hardware meets the system requirements. Keep in mind that, although there is a minimum requirement for the CPU and RAM, there is also a recommended CPU and RAM configuration. For the sake of performance, you should usually stay away from the minimum requirements and stick to the recommended settings (or better). Table 3.1 lists system recommendations for Windows Server 2003.

Table 3.1 System Requirements

Requirement

Standard Server

Enterprise Server

Minimum CPU speed

133MHz

133MHz for x86-based computers

 

 

733MHz for Itanium-based computers

Recommended CPU speed

550MHz

733MHz

Minimum RAM

128MB

128MB

Recommended minimum speed

256MB

256MB

Maximum RAM

4GB

32GB for x86-based computers

 

 

64GB for Itanium-based computers

Multiprocessor support

Up to 4

Up to 8

Disk space

1.5GB

1.5GB for x86-based for setup computers

 

 

2.0GB for Itanium-based computers


Choosing a New Installation or an Upgrade

If you have an existing Windows environment, you may need to perform a new installation or upgrade an existing server. There are benefits to each of these options.

Should You Perform a New Installation?

The primary benefit of a new installation is that, by installing the operating system from scratch, you are starting with a known good server. You can avoid migrating problems that may have existed on your previous server—whether due to corrupt software, incorrect configuration settings, or improperly installed applications. Keep in mind, however, that you will also lose all configuration settings from your previous installation. Make sure you document your server configuration information and back up any data that you want to keep.

When performing a new installation, you can install on a new hard drive (or partition) or in a different directory on the same disk as a previous installation. Most new installations are installed on a new or freshly formatted hard drive. Doing so removes any old software and gives you the cleanest installation.

Should You Upgrade an Existing Server?

Upgrading, on the other hand, replaces your current Windows files but keeps existing users, settings, groups, rights, and permissions. In this scenario, you don't have to reinstall applications or restore data. Before choosing this option, keep in mind that you should test your applications for compatibility before migration. Just because they worked on previous versions of Windows does not mean they will work on Windows Server 2003.

As always, before performing any type of server maintenance, you should perform a complete backup of any applications and data that you want to preserve.

To upgrade to Windows Server 2003, you must be running a server-level operating system. You cannot upgrade Workstation or Home editions to Windows Server 2003. To upgrade your existing server, you must be running Windows 2000 or Windows NT 4.0 Server (Service Pack 5 or higher). Table 3.2 lists the available upgrade paths to Windows Server 2003.

Table 3.2 Upgrade Compatibility for Windows Server 2003

Previous Operating System

Upgrade to Windows Server 2003 Possible?

Windows NT versions 3.51 and earlier

No, you must first upgrade to NT 4.0 Service Pack 5 or higher.

Windows NT 4.0 Server

Yes, you must have Service Pack 5 or higher.

Windows 2000 Server

Yes.

Windows 2000 Advanced Server

Yes.

Windows 2000 Professional

No, only server-level operating systems can be upgraded.

Windows XP Professional

No, only server-level operating systems can be upgraded.

Novell NetWare

No, but migration tools are available to migrate Novell Directory Services (NDS) information to a Windows domain.


Determining the Type of Server to Install

You have the choice of making your server a domain controller (DC), a member server, or a standalone server. After you determine the tasks the server will perform, you can determine the role you will assign to it.

Domain controllers and member servers play a role in a new or existing domain. Standalone servers are not joined to a particular domain.

As in Windows 2000, you are able to promote or demote server functions as you like. Standalone servers can be joined to the domain to become member servers. Using the DCPromo utility, you can promote member servers to domain controllers. And, by uninstalling the Active Directory service from a domain controller, you can return it to member server status.

Gathering the Information Necessary to Proceed

During the installation of Windows Server 2003, you will have to tell the Setup Wizard how you want your server configured. The wizard will take the information you provide and will configure the server settings to meet your specifications.

Taking the time to gather the information described in the following sections before starting your installation will likely make your installation go faster and easier.

Selecting the Computer Name

Each computer on a network must have a name that is unique within that network. Many companies have a standard naming convention for their servers and workstations. If not, you can use the following information as a guideline for creating your own. Although the computer name can contain up to 63 characters, workstations and servers that are pre–Windows 2000 recognize only the first 15 characters. It is widely considered a best practice to use only Internet-standard characters in your computer name. This includes the letters A–Z (upper- and lowercase), the numbers 0–9, and the hyphen (-).

Although it's true that implementing the Microsoft domain name system (DNS) service in your environment could allow you to use some non-Internet standard characters (such as Unicode characters and the underscore), you should keep in mind that this is likely to cause problems with any non-Microsoft DNS servers on your network. You should think carefully and test thoroughly before straying from the standard Internet characters noted in the preceding paragraph.

Name of the Workgroup or Domain

During the server installation, the Setup Wizard will ask for the name of the workgroup or domain that the server will be joining. You can either enter the name of an existing organizational structure or enter a new name, creating a new workgroup or domain.

Users new to Microsoft networking may ask, "What is the difference between a workgroup and a domain?" Simply put, a domain is a collection of computers and supporting hardware that share the same security database. Grouping the equipment in this manner allows you to set up centralized security and administration. Conversely, a workgroup has no centralized security or administration. Each server or workstation is configured independently and locally for all security and administration settings.

Network Protocol and IP Address of the Server

When installing Windows Server 2003, you must install and configure a network protocol that will allow it to communicate with other machines on the network. Currently, the most commonly used protocol is called TCP/IP, which stands for Transmission Control Protocol/Internet Protocol. This protocol allows computers throughout the Internet to communicate. After you install the TCP/IP protocol, you need to configure an IP address for the server. You can choose one of the following three methods to assign an IP address:

  • Automatic Private IP Addressing (APIPA)—APIPA can be used if you have a small network that does not have a Dynamic Host Configuration Protocol (DHCP) server, which is used for dynamic IP addresses. A unique IP address is assigned to the network adapter using the LINKLOCAL IP address space. The address always starts with 169.254 and is in the format 169.254.x.x. Note that if an APIPA is in use, and a DHCP server is brought up on the network, the computer will detect this and will use the address that is assigned by the DHCP service instead.

  • Dynamic IP address—A dynamic IP address is assigned by a DHCP server. This allows a server to assign IP addresses and configuration information to clients. Some examples of the information that is distributed include IP address, subnet mask, default gateway, domain name system (DNS) server address, and Windows Internet Naming Service (WINS) server address. As the dynamic portion of the name suggests, this address is assigned to the computer for a configurable length of time, known as a lease. When the lease expires, the workstation must again request an IP address from the DHCP server. It may or may not get the same address that it had previously. Although servers and workstations can both be configured to use this method of addressing, it is generally used for workstations rather than servers.

  • Static IP address—Using a static IP address is the most common decision for a server configuration. By static, we mean that the address will not change unless you change the configuration of the server. This point is important because clients and resources that need to access the server must know the address to be able to connect to it. If the IP address changed regularly, connecting to it would be difficult.

Backing Up Files

Whether you are performing a new installation on a previously used server or upgrading an existing server, you should perform a complete backup of the data and operating system before you begin your new installation. This way, you have a fallback plan if the installation fails or the server does not perform the way you anticipated.

When performing a new installation on a previously used server, you overwrite any data that was stored there. In this scenario, you will have to use your backup tape to restore any data that you want to preserve.

On the other hand, if you are going to upgrade an existing server, a known good backup will allow you to recover to your previous state if the upgrade does not go as planned.

NOTE

Many people back up their servers but never confirm that the data can be read from the backup media. When the time comes to recover their data, they find that the tape is unusable or unreadable, or that they do not know the proper procedures for restoring their server. You should perform backup/recovery procedures on a regular basis in a lab environment to make sure that your equipment is working properly and that you are comfortable with performing the process.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020