␡
- ADSL Overview
- Cisco 6160 DSLAM Overview
- Cisco 6400 UAC Overview
- DSL Access Architectures and Protocols
- Scenarios
- Practical Exercise 8-1: PPPoA over DSL
- Practical Exercise 8-1 Solution
- Practical Exercise 8-2: RFC 1483 Bridging over DSL
- Practical Exercise 8-2 Solution
- Summary
- Review Questions
This chapter is from the book
Practical Exercise 8-2: RFC 1483 Bridging over DSL
In this practical exercise, lab-827A and lab-827B are connected to the DSLAM and will be configured using RFC 1483 bridging, as shown in Figure 8-13. DSLAM and NSP configuration remain the same as in the previous exercise. For this exercise, you will assign the ATM interface of the CPEs and subinterfaces of the NRP to Bridge group 1. You will see the configuration output as well as some useful commands to verify the bridging configuration.