Home > Articles > Operating Systems, Server > Microsoft Servers

Install and Uninstall Active Directory Domain Services

This chapter describes the steps required to install and uninstall Active Directory Domain Services.
This chapter is from the book

IN THIS CHAPTER:

  • Install a New Windows Server 2008 Forest
  • Install a New Windows Server 2008 Child Domain
  • Install a New Windows Server 2008 Domain Tree
  • Install an Additional Windows Server 2008 Domain Controller
  • Perform a Staged Installation of a Read-Only Domain Controller
  • Install AD DS from Restored Backup Media
  • Remove a Domain Controller from a Domain
  • Forcing the Removal of a Windows Server 2008 Domain Controller
  • Performing Metadata Cleanup
  • Rename a Domain Controller

Active Directory Domain Services (AD DS) was introduced with the release of Windows 2000 Server and has been included in each subsequent release of the server operating system from Microsoft. The majority of companies have at least one AD DS forest deployed. However, some companies continue to deploy new AD DS forests for various reasons.

This chapter describes the steps required to install and uninstall Active Directory Domain Services.

Install a New Windows Server 2008 Forest

Solution: Installing a new Windows Server 2008 forest consists of promoting a Windows Server 2008 server to a domain controller. Thereafter, additional DCs and domains can be added to the new forest. The installation of a new Windows Server 2008 forest can be performed by using the Windows interface, the command line, and an answer file.

Install a New Forest by Using the Windows Interface

To install a new forest by using the Windows interface, perform the following steps using a local account that has membership in the following local group:

  • Administrators
  1. Log on to the server you want to promote to a domain controller.
  2. Click Start and then click Server Manager.
  3. In Roles Summary, click Add Roles.
  4. On the Before You Begin page, click Next.
  5. On the Select Server Roles page, shown in Figure 3.1, click the Active Directory Domain Services check box; then click Next.

    Figure 3.1

    Figure 3.1 The Select Server Roles page.

  6. On the Active Directory Domain Services page, click Next.
  7. On the Confirm Installation Selections page, click Install.
  8. On the Installation Results page, shown in Figure shown in Figure 3.2, verify that the installation succeeded and then click Close this wizard and launch the Active Directory Domain Services Installation Wizard (dcpromo.exe).

    Figure 3.2

    Figure 3.2 The Installation Results page.

  9. On the Welcome to the Active Directory Domain Services Installation Wizard page, click Next.
  10. On the Operating System Compatibility page, click Next.
  11. On the Choose a Deployment Configuration page, shown in Figure 3.3, click Create a new domain in a new forest; then click Next.

    Figure 3.3

    Figure 3.3 The Choose a Deployment Configuration page.

  12. On the Name the Forest Root Domain page, shown in Figure 3.4, type the fully qualified domain name (FQDN) for the forest root domain and then click Next.

    Figure 3.4

    Figure 3.4 The Name the Forest Root Domain page.

  13. On the Set Forest Functional Level page, shown in Figure 3.5, select the forest functional level that meets your requirements and click Next.

    Figure 3.5

    Figure 3.5 The Set Forest Functional Level page.

  14. If you set a forest functional level other than Windows Server 2008, the Set Domain Functional Level page displays, as shown in Figure 3.6. Select the domain functional level that meets your requirements and click Next.

    Figure 3.6

    Figure 3.6 The Set Domain Functional Level page.

  15. On the Additional Domain Controller Options page, shown in Figure 3.7, DNS Server is selected by default, which allows the DNS infrastructure to be created by the installation process. If you plan to use AD-Integrated DNS, click Next. If you plan to use an existing DNS infrastructure and do not want the domain controller to be a DNS server, clear the DNS Server check box and click Next.

    Figure 3.7

    Figure 3.7 The Additional Domain Controller Options page.

  16. If the wizard cannot create a delegation for the DNS server, it displays a message to indicate that you can create the delegation manually, as shown in Figure 3.8. To continue, click Yes.

    Figure 3.8

    Figure 3.8 The manual DNS Delegation Message.

  17. On the Location for Database, Log Files, and SYSVOL page, shown in Figure 3.9, type the volume and folder locations for the database file, the directory service log files, and the SYSVOL files; then click Next.

    Figure 3.9

    Figure 3.9 The Location for Database, Log Files, and SYSVOL page.

  18. On the Directory Services Restore Mode Administrator Password page, shown in Figure 3.10, type and confirm the restore mode password and then click Next.

    Figure 3.10

    Figure 3.10 The Directory Services Restore Mode Administrator Password page.

  19. On the Summary page, shown in Figure 3.11, click Next after you review your selections.

    Figure 3.11

    Figure 3.11 The Summary page.

    The Active Directory Domain Services installation process starts, as shown in Figure 3.12.

    Figure 3.12

    Figure 3.12 The Active Directory Domain Services Installation page.

  20. After the installation is complete, the Completing the Active Directory Domain Services Installation Wizard page appears, as shown in Figure 3.13. Ensure the installation was successful and click Finish.

    Figure 3.13

    Figure 3.13 The Completing the Active Directory Domain Services Installation Wizard page.

  21. When prompted to restart, click Restart Now.
  22. To validate the installation process, click Start, click Run, type C:\Windows\Debug, and click OK.
  23. Open the DCPROMO.log file and analyze the results in the file.

Install a New Forest by Using the Command Line

Active Directory Domain Services can also be installed by using the command line. This is particularly useful when installing AD DS on a server that has a Server Core installation of Windows Server 2008.

The installation options when using the command line are the same as those used when installing AD DS using an unattended installation. When installing AD DS by using the command line, you type the installation options and parameters into the command line as opposed to an answer file, which is used for an unattended installation.

Table 3.1 lists the installation parameters used in the steps that follow and the corresponding action of each parameter.

Table 3.1. Installing a New Forest by Using the Command Line Installation Parameters

Installation Parameter

Corresponding Action

InstallDns:yes

DNS server will be installed.

dnsOnNetwork:No

DNS server will be installed.

replicaOrNewDomain:domain

A new domain will be created.

newDomain:forest

A new forest will be created.

newDomainDnsName:WS08Domain02.local

FQDN of the new domain.

DomainNetbiosName:WS08Domain02

NetBIOS name of the new domain.

databasePath:"c:\Windows\ntds"

Database path.

logPath:"c:\Windows\ntds"

Log file path.

sysvolpath:"c:\Windows\sysvol"

SYSVOL path.

safeModeAdminPassword:Today01!

DSRM Administrator password.

forestLevel:2

Forest functional level will be set to Windows Server 2003.

domainLevel:2

Domain functional level will be set to Windows Server 2003.

rebootOnCompletion:yes

Server will be rebooted after completion.

To install a new forest by using the command line, perform the following steps using a local account that has membership in the following local group:

  • Administrators
  1. Log on to the server you want to promote to a domain controller.
  2. Click Start and then click Command Prompt.
  3. Type the following into the command prompt window, as shown in Figure 3.14, and then press Enter:

    dcpromo /unattend /InstallDns:yes /dnsOnNetwork:no
    /replicaOrNewDomain:domain /newDomain:forest
    /newDomainDnsName:WS08Domain02.local
    /DomainNetbiosName:WS08Domain02 /databasePath:"c:\Windows\ntds"
    /logPath:"c:\Windows\ntds" /sysvolpath:"c:\Windows\sysvol"
    /safeModeAdminPassword:Today01! /forestLevel:2 /domainLevel:2
    /rebootOnCompletion:yes
    Figure 3.14

    Figure 3.14 Installing a new forest using the command line.

    The dcpromo process begins by determining whether the AD DS binaries are installed. If the binaries are not installed, dcpromo installs them, as shown in Figure 3.15.

    Figure 3.15

    Figure 3.15 Installing AD DS services binaries.

  4. After the AD DS binaries have been installed, a summary of the installation options is presented in the command prompt window, as shown in Figure 3.16. Then the AD DS installation process begins.

    Figure 3.16

    Figure 3.16 Installing AD DS.

  5. The status of the AD DS installing is updated in the command prompt window, as shown in Figure 3.17.

    Figure 3.17

    Figure 3.17 The installation’s progress.

  6. When the installation process is complete, the server reboots automatically if the /rebootOnCompletion option was used in the command line. If the /rebootOnCompletion option was not used in the command line, you are prompted to restart the server.
  7. To validate the installation process, click Start, click Run, type C:\Windows\Debug, and click OK.
  8. Open the DCPROMO.log file and analyze the results in the file.

Install a New Forest by Using an Answer File

Active Directory Domain Services can also be installed using an answer file. This is useful when installing AD DS on a server that has a Server Core installation of Windows Server 2008.

Table 3.2 lists the installation parameters used in the steps that follow and the corresponding action of each parameter.

Table 3.2. Installing a New Forest by Using Answer File Installation Parameters

Installation Parameter

Corresponding Action

InstallDNS=yes

DNS server will be installed.

NewDomain=forest

A new forest will be created.

NewDomainDNSName=WS08Domain03.local

FQDN of the new domain.

DomainNetBiosName=WS08Domain03

NetBIOS name of the new domain.

ReplicaOrNewDomain=domain

A new domain will be created.

ForestLevel=3

Forest functional level will be set to Windows Server 2008.

DomainLevel=3

Domain functional level will be set to Windows Server 2008.

DatabasePath="c:\Windows\ntds"

Database path.

LogPath="c:\Windows\ntds"

Log file path.

RebootOnCompletion=yes

Server will be rebooted after completion.

SYSVOLPath=c:\Windows\sysvol"

SYSVOL path.

SafeModeAdminPassword=Today01!

DSRM Administrator password.

In order to install a new forest by using an answer file, perform the following steps using a local account that has membership in the following local group:

  • Administrators
  1. Log on to the server you want to promote to a domain controller.
  2. Click Start, click Run, type notepad, and click OK.
  3. On the first line, type [DCINSTALL], and then press ENTER.
  4. Type the following entries, one entry on each line, as shown in Figure 3.18:

    InstallDNS=yes
    NewDomain=forest
    NewDomainDNSName=WS08Domain03.local
    DomainNetBiosName=WS08Domain03
    ReplicaOrNewDomain=domain
    ForestLevel=3
    DomainLevel=3
    DatabasePath="c:\Windows\ntds"
    LogPath="c:\Windows\ntds"
    RebootOnCompletion=yes
    SYSVOLPath="c:\Windows\sysvol"
    SafeModeAdminPassword=Today01!
    Figure 3.18

    Figure 3.18 The answer file.

  5. Save the answer file as C:\DCAnswer.txt.
  6. Click Start and then click Command Prompt.
  7. Type the following into the command prompt window, as shown in Figure 3.19, and then press Enter:

    dcpromo /unattend:"C:\DCAnswer.txt"
    Figure 3.19

    Figure 3.19 Installing a new forest by using an answer file.

    The dcpromo process begins by determining whether the AD DS binaries are installed. If the binaries are not installed, dcpromo installs them.

  8. After the AD DS binaries have been installed, a summary of the installation options is presented in the command prompt window; then the AD DS installation process begins. The status of the AD DS installing is updated in the command prompt window.
  9. When the installation process is complete, the server reboots automatically if the /rebootOnCompletion option was used in the answer file. If the /rebootOnCompletion was not used in the answer file, you are prompted to restart the server.
  10. To validate the installation process, click Start, click Run, type C:\Windows\Debug, and click OK.
  11. Open the DCPROMO.log file and analyze the results in the file.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020