Home > Articles

Address Conversion Functions

Address Conversion Functions

In the last chapter, you learned how various types of socket addresses could be allocated and initialized. These were all simple cases of initializing from a constant. Setting up an address from a C string with varying addresses requires more programming effort. In this chapter, you will focus on the additional issues pertaining to establishing Internet addresses, and learning about the functions that can assist you in this area.

In this chapter, you will learn about

  • Classes of internet addresses

  • IP netmasks

  • Private and reserved IP numbers

  • Functions that convert IP numbers

Before you get started however, it's a good time to review the design of an IP address. Then, you'll have a greater insight into the job that is ahead of you.

Internet IP Numbers

The IP number consists of four decimal values separated by decimal points, often referred to as "dots." This convention is frequently called dotted-quad notation, or sometimes dotted-decimal notation. Each decimal value represents the unsigned value of one byte, in network byte sequence. Remember that network order requires that the most significant bytes appear first.

Each byte is considered as an unsigned 8-bit value. This restricts each byte to a decimal value range of zero to 255. Because the value is unsigned, the value cannot be negative, and a plus sign is not permitted. Consider the address, for example; you know that the first byte in network order must have the value of 192 decimal.

When you see a movie showing an IP number on the screen with a value such as 192.168.300.5, you know that the producer knew very little about TCP/IP networking! Although this IP number is syntactically correct, the decimal value 300 obviously exceeds the maximum unsigned value of 255.

Later, starting with the section "Manipulating IP Numbers," you will look at functions that can parse a C string into network address bytes, and range check the decimal values for you.

Internet Address Classes

Internet addresses are made up of two components:

  • Network number (most significant bits)

  • Host number (least significant bits)

The network number identifies the network where the host can be contacted. The host number identifies one host (your PC, for example) out of several on that particular network.

As you already know, the IP number is a 32-bit value (or four 8-bit bytes). However, the division between the network number and host number components is not at a fixed location. The dividing line depends upon the classification of the address, which is determined by examining the most significant byte of the address. Table 3.1 summarizes how IP numbers are classified.

Table 3.1: Internet Address Classes




Network Bits

Host Bits
















Class A, B, and C define specific IP addresses of hosts. For class D and E addresses, there are zero host bits available in the address. Class D addresses are used for multicasting where the 28 bits are used to describe a multicast group. The 27 bits of the class E address are reserved.

Figure 3.1 helps you visualize the breakdown of the 32-bit IP address. The frequently used classes A, B, and C are shown.

Figure 3.1 This figure illustrates the Internet address classes A, B, and C.

Understanding Netmask Values

There are situations in which you must determine the netmask value of an address. This is particularly true if you are setting up your own network. So, just what is a netmask value anyway?

If you take the Internet IP Address as a 32-bit number, then you know that the network ID is specified in the most significant bits of the address. Additionally, the host ID is specified by the least significant bits of the same address (review Figure 3.1 if necessary). The netmask is simply the value that you would "bit-wise and" with the address to leave only the network ID. Figure 3.2 illustrates how the IP address is masked to extract only the network ID bits.


You will often hear people use the terms net and subnet interchangeably. Technically speaking, these terms represent two distinctly different network ID values. The network ID identifies the network ID number proper.

However, within an IPv4 number, it is possible to further subdivide the host ID leaving a subnetwork ID in the most significant bits of the host ID and the final host ID in the least significant bits. When subnetting is used, the netmask value will take into account these additional subnetwork ID bits.


Consequently, when subnetting is in use, the network mask will differ from the ones presented in this chapter.

Figure 3.2 Applying a netmask to yields a network address.

The resulting most significant bits represent the network portion of the IP address without the host ID. Figure 3.3 illustrates how the network mask is converted from hexadecimal back into dotted-quad notation.

Figure 3.3 Here is the netmask expressed in dotted-quad notation.

If you must set up your own IP network, then you will need to determine what the netmask values should be. Table 3.2 lists the netmask values for class A, B, and C addresses.

Table 3.2: Netmask Values by IP Class








Sometimes, in networking software, your software must be able to classify a network address. Sometimes this is simply done in order to determine a default netmask value.

Listing 3.1 provides a short program that illustrates how to classify an IP address, starting from a socket address. To compile and run the provided source code, perform the following:

$ make netmask
gcc -c  -D_GNU_SOURCE -Wall netmask.c
gcc netmask.o -o netmask
$ ./netmask

The program in Listing 3.1 sets up four different IP addresses in an Internet socket address structure. Then, the address is examined and classified. This is done to demonstrate how you would classify an IP address of a remote client that has connected to your server.

Listing 3.1: netmask.c--Classifying and Determining a Netmask

1:   /* netmask.c:
2:    * 
3:    * Classify an IP address:
4:    */
5:   #include <stdio.h>
6:   #include <unistd.h>
7:   #include <stdlib.h>
8:   #include <sys/types.h>
9:   #include <sys/socket.h>
10:  #include <netinet/in.h>
12:  int
13:  main(int argc,char **argv) {
14:      int x;               /* Index variable */
15:      struct sockaddr_in adr_inet;/* AF_INET */
16:      int len_inet;               /* length  */
17:      unsigned msb; /* Most significant byte */
18:      char class;
19:      char *netmask;
20:      static struct {
21:          unsigned char   ip[4];
22:      } addresses[] = {
23:          { { 44,135,86,12 } },
24:          { { 127,0,0,1 } },
25:          { { 172,16,23,95 } },
26:          { { 192,168,9,1 } }
27:      };
29:      for ( x=0; x<4; ++x ) {
30:          /*
31:           * Set up the socket address, to
32:           * demonstrate how to classify it:
33:           */
34:          memset(&adr_inet,0,sizeof adr_inet);
35:          adr_inet.sin_family = AF_INET;
36:          adr_inet.sin_port = htons(9000);
37:          memcpy(&adr_inet.sin_addr.s_addr,
38:              addresses[x].ip,4);
39:          len_inet = sizeof adr_inet;
41:          /*
42:           * Classify this address:
43:           *
44:           * 1. Get the Most Significant Byte
45:           * 2. Classify by that byte
46:           */
47:          msb = *(unsigned char *)
48:              &adr_inet.sin_addr.s_addr;
50:          if ( (msb & 0x80) == 0x00 ) {
51:              class = 'A';
52:              netmask = "";
53:          } else if ( (msb & 0xC0) == 0x80 ) {
54:              class = 'B';
55:              netmask = "";
56:          } else if ( (msb & 0xE0) == 0xC0 ) {
57:              class = 'C';
58:              netmask = "";
59:          } else if ( (msb & 0xF0) == 0xE0 ) {
60:              class = 'D';
61:              netmask = "";
62:          } else  {
63:              class = 'E';
64:              netmask = "";
65:          }
67:          printf("Address %u.%u.%u.%u is class %c "
68:              "netmask %s\n",
69:              addresses[x].ip[0],
70:              addresses[x].ip[1],
71:              addresses[x].ip[2],
72:              addresses[x].ip[3],
73:              class,
74:              netmask);
75:      }
77:      return 0;
78:  }

The operation of this demonstration program can be summarized in the following steps:

  1. The socket address structure adr_inet is defined in line 15. This will be the address that will be examined for classification.

  2. The addresses to be tested are defined in a static array of structures, defined in lines 20 to 27. You might want to experiment by trying other address numbers in lines 23 to 26.

  3. Line 29 starts a loop that will iterate through four entries in the addresses[] array. The subscript value will be the variable x.

  4. A socket address is initialized in lines 34 to 39, from addresses[x]. This is done in the same manner it was presented in the last chapter, and should look familiar to you now.

  5. The most significant byte is extracted out of the socket address adr_inet in line 47. You will remember that the most significant byte is the first byte of the address, in network byte order (big-endian). With this byte lifted from the socket address, it will be possible to classify the address based upon the high-order bits in this byte.

  6. The if statement in line 50 tests to see whether the high-order bit is zero (review Figure 3.1, looking at the class A address). If the high-order bit is zero, you know you have a class A address (lines 51 and 52 execute).

  7. The if statement in line 53 tests to see whether the high-order bit is 1, and the 2nd highest bit is a 0 (review the class B address in Figure 3.1). If this is true, then the statements in lines 54 and 55 classify this address as class B.

  8. The if statement in line 56 tests to see whether the highest two bits are 11 (binary), followed by a 0 bit. If this is true, then lines 57 and 58 classify the address as a class C address (review Figure 3.1 for class C addresses).

  9. The if statement in line 59 tests for the high-order bit pattern of 1110. This causes the address to be classified as a class D address. Note for class D and class E, the netmask is set to because the entire address is a network address.

  10. The else statement in line 62 evaluates everything remaining as a class E address, and sets the netmask also to (see step 9).

  11. The results of the classification are reported in lines 67 to 74.

Listing 3.2 shows the output that results from running this demonstration program.

Listing 3.2: The Output of the netmask.c Demonstration Program

$ ./netmask
Address is class A netmask
Address is class A netmask
Address is class B netmask
Address is class C netmask

With the example code demonstrated in Listing 3.1, you will be ready to classify any IP number that you must process.

While your attention is still focused upon IP numbers, now is a good time to cover private IP number allocations. These are addresses that you will use if you decide to establish your own private network.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.


Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.


If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information

Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.


This site is not directed to children under the age of 13.


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information

If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information

Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure

Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact

Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice

We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020