Home > Articles > Certification > Cisco Certification > CCDA

This chapter is from the book

IGRP

Cisco Systems developed the IGRP to overcome the limitations of RIPv1. IGRP is a distance-vector routing protocol that considers a composite metric which, by default, uses bandwidth and delay as parameters instead of hop count. IGRP is not limited to the 15-hop limit of RIP. IGRP has a maximum hop limit of 100, by default, and can be configured to support a network diameter of 255.

With IGRP, routers usually select paths with a larger minimum-link bandwidth over paths with a smaller hop count. Links do not have a hop count. They are exactly one hop.

IGRP is a classful protocol and cannot implement VLSM or CIDR. IGRP summarizes at network boundaries. As in RIP, IGRP implements split horizon with poison reverse, triggered updates, and holddown timers for stability and loop prevention. Another benefit of IGRP is that it can load-balance over unequal-cost links. As a routing protocol developed by Cisco, IGRP is available only on Cisco routers.

By default, IGRP will load-balance traffic if there are several paths with equal cost to the destination. IGRP will do unequal-cost load balancing if configured with the variance command.

IGRP Timers

IGRP sends its routing table to its neighbors every 90 seconds. IGRP's default update period of 90 seconds is a benefit compared to RIP, which can consume excessive bandwidth when sending updates every 30 seconds. IGRP uses an invalid timer to mark a route as invalid after 270 seconds (three times the update timer). As with RIP, IGRP uses a flush timer to remove a route from the routing table; the default flush timer is set to 630 seconds (seven times the update period and more than 10 minutes).

If a network goes down or the metric for the network increases, the route is placed in holddown. The router accepts no new changes for the route until the holddown timer expires. This setup prevents routing loops in the network. The default holddown timer is 280 seconds (three times the update timer plus 10 seconds). Table 12-2 summarizes the default settings for IGRP timers.

Table 12-2 IGRP Timers

IGRP Timer

Default Time

Update

90 seconds

Invalid

270 seconds

Holddown

280 seconds

Flush

630 seconds


IGRP Metrics

IGRP uses a composite metric based on bandwidth, delay, load, and reliability. Chapter 11 discussed these metrics. By default, IGRP uses bandwidth and delay to calculate the composite metric, as follows:

IGRPmetric = {k1 x BW + [(k2 x BW)/(256 – load)] 
+ k3 x delay} x {k5/(reliability + k4)}

In this formula, BW uses the lowest interface bandwidth in the path, and delay is the sum of all outbound interface delays in the path. The router dynamically measures reliability and load. The values of reliability and load used in the metric computation range from 1 to 255. Cisco IOS routers display a 100 percent reliability as 255/255. They also display load as a fraction of 255. They display an interface with no load as 1/255. By default, k1 and k3 are set to 1, and k2, k4, and k5 are set to 0. With the default values, the metric becomes

IGRPmetric = {1 x BW + [(0 x BW)/(256 – load)]
 + 1 x delay} x {0/(reliability + 0)}
IGRPmetric = BW + delay

The BW is 10,000,000 divided by the smallest of all the bandwidths (in kbps) from outgoing interfaces to the destination. To find delay, add all the delays (in microseconds) from the outgoing interfaces to the destination and divide this number by 10. (The delay is in 10s of microseconds.)

Example 12-3 shows the output interfaces of two routers. For a source host to reach network 172.16.2.0, a path takes the serial link and then the Ethernet interface. The bandwidths are 10,000 and 1544; the slowest bandwidth is 1544. The sum of delays is 20000 + 1000 = 21000.

Example 12-3 show interface

RouterA> show interface serial 0
Serial0 is up, line protocol is up
 Hardware is HD64570
 Internet address is 172.16.4.1/24
 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
   reliability 255/255, txload 1/255, rxload 1/255

RouterB> show interface ethernet 0
Ethernet0 is up, line protocol is up
 Hardware is Lance, address is 0010.7b80.bad5 (bia 0010.7b80.bad5)
 Internet address is 172.16.2.1/24
 MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
   reliability 255/255, txload 1/255, rxload 1/255

The IGRP metric is calculated as follows:

IGRPmetric = (10,000,000/1544) + (20000 + 1000)/10
IGRPmetric = 6476 + 2100 = 8576

You can change the default metrics using the metric weight tos k1 k2 k3 k4 k5 subcommand under router igrp. Cisco once intended to implement the tos field as a specialized service in IGRP; it was not implemented so the value of tos is always 0. The k arguments are the k values used to build the composite metric. For example, if you want to use all metrics, the command is as follows:

router igrp n
 metric weight 0 1 1 1 1 1

IGRP Design

Something to remember when designing a network with IGRP is that it does not support VLSMs. The IP addressing scheme with IGRP requires the same subnet mask for the entire IP network, a flat IP network. IGRP does not support CIDR and network summarization within the major network boundary. IGRP is not limited to a maximum of 15 hops as RIP is; therefore, the network diameter can be larger than that of networks using RIP. IGRP also broadcasts its routing table every 90 seconds, which produces less network overhead than RIP. IGRP is limited to Cisco-only networks. EIGRP is recommended over IGRP.

As shown in Figure 12-5, when you use IGRP, all segments must have the same subnet mask.

Figure 5Figure 12-5 IGRP DesignÅ@

IGRP Summary

The characteristics of IGRP follow:

  • Distance-vector protocol.

  • Uses IP protocol 9.

  • Classful protocol (no support for CIDR).

  • No support for VLSMs.

  • Composite metric using bandwidth and delay by default.

  • You can include load and reliability in the metric.

  • Route updates sent every 90 seconds.

  • 104 routes per IGRP message.

  • Hop count limited to 100 by default, configurable to up to 255.

  • No support for authentication.

  • Implements split horizon with poison reverse.

  • Implements triggered updates.

  • By default, equal-cost load balancing. Unequal-cost load-balancing with the variance command.

  • Administrative distance is 100.

  • Previously used in large networks; now replaced by EIGRP.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020