Home > Articles

This chapter is from the book

This chapter is from the book

Dealing with Passwords

Laptop systems have a level of integrated password security not found in most desktop systems. These passwords are separate and distinct from any passwords required by the operating system or other applications installed on the machine. This section examines the passwords specifically associated with laptop systems and their hard disks.

Password Types

Some laptop systems can have up to three passwords set on them. Two of these passwords are very secure, meaning that if they are lost, you have essentially no way to recover them, thus rendering the hard drive and/or motherboard completely nonfunctional.

CAUTION

These are not benign passwords that can easily be circumvented or reset. If you lose these passwords, short of some very specialized and expensive services (for which you will have to provide proof of ownership), you will not be able to use the motherboard or access the data on the hard disk, even if you move the drive to another system! In fact, both the motherboard and the hard disk will have to be replaced, and all your data will be lost. Clearly it is important to understand these passwords, because if you set them, the implications of losing or forgetting them are quite severe.

These three passwords are as follows:

  • Power-on password (POP)—Protects the system from being powered on by an unauthorized user. The POP must be entered before an operating system will boot. The POP resides in the CMOS RAM on the motherboard. If it's lost, the POP can be cleared through a relatively simple procedure.

  • Hard disk password (HDP)—Protects the information on your drive from access by an unauthorized user. If you set an HDP, others cannot access the data on your hard disk without knowing the password, even if the drive is installed in another system. The HDP resides on the hard disk, in an area inaccessible by the user and the system, and it cannot be accessed or reset if lost.

  • Supervisor password (SVP)—Protects the information stored in the BIOS Setup. The SVP must be entered in order to get access to the BIOS Setup and make changes to configuration settings. The SVP is stored on the motherboard in a specialized type of memory and cannot be accessed or reset if lost.

If either the POP or HDP has been set, prompts for this password will appear on the screen whenever the system is powered on. The system will not continue until the respective password is entered. If only an SVP is set, it will also set the HDP to the same value, and yet no password prompt will appear during normal operation. Instead, the password prompt will appear only when the BIOS Setup is run.

Power-On Password (POP)

The power-on password is a feature available in many portable systems, and it's stored in the CMOS RAM. If it's lost, the POP can be erased in most systems by setting a password-clear jumper (located normally on the motherboard) or by removing the CMOS battery. You will normally find instructions for clearing the POP in the user manual or service manual for your specific system.

If a POP is set, you will be prompted (the prompt normally looks like an image of a padlock with a screen next to it) for the password at the following times:

  • During the POST (Power On Self Test) each time the system is turned on.

  • When the system returns to normal operation from suspend mode.

To set a power-on password, follow these steps:

  1. Run the BIOS Setup by pressing and holding the F1 key while turning on the computer.

  2. Select the Password icon and then the Power-On icon.

  3. Type in your desired password and then press Enter. You can use any combination of up to seven alphanumeric characters (A–Z, 0–9). Letters are not case sensitive, meaning that upper- and lowercase letters are treated the same.

  4. Type in the password again to verify it. Then press Enter.

  5. Select Exit and then Restart.

To change a power-on password, follow these steps:

  1. Turn off the system, wait at least 5 seconds, and then turn it back on.

  2. When the POP prompt appears, type in the current password and then press the spacebar.

  3. Type in the new password and then press the spacebar. Remember to use no more than seven characters.

  4. Type in the new password again to verify it. Then press Enter.

To remove a power-on password, follow these steps:

  1. Turn off the system, wait at least 5 seconds, and then turn it back on.

  2. When the POP prompt appears, type in the current password, press the spacebar, and then press Enter.

To remove a power-on password that you have lost or forgotten, use one of the following two procedures.

First, if no Supervisor password (SVP) has been set, follow these steps:

  1. Turn off the system.

  2. Remove the main battery.

  3. Remove the backup (CMOS) battery. The CMOS battery is usually located under the keyboard or next to the memory modules in most systems. See the owner's or service manual to determine the exact location in a given system.

  4. Turn the system on and wait until the POST ends. After the POST ends, no password prompt should appear, indicating that the POP has been removed.

  5. Power the system off and then reinstall the backup (CMOS) and main batteries.

Second, if a Supervisor password (SVP) has been set and is known, follow these steps:

  1. Run the BIOS Setup by pressing and holding the F1 key while turning on the computer.

  2. At the password prompt, type in the Supervisor password and then press Enter. The BIOS Setup screen should appear.

  3. Select the Password icon and then the Power-On icon.

  4. Type in the Supervisor password, press the spacebar, press Enter, and then press Enter again.

  5. Select Exit and then Restart.

Hard Disk Password (HDP)

A hard disk password provides a great deal of additional security for your data over the existing power-on password. Even if you set a POP, somebody could still remove the hard drive from your system and then install the drive into another system where he or she could access your data. However, if you set an HDP, nobody else will be able to access the data on the drive in any system without first knowing the password. Because the HDP is actually stored on the hard disk, it stays with the drive until you remove or change it. Doing that, however, requires that you know the password to begin with.

If a hard disk password is set, you will be prompted (the HDP prompt normally appears as an image of a padlock next to a disk cylinder) for the password at the following times and under the following circumstances:

  • During the POST (Power On Self Test), each time the system is turned on.

  • If you move the drive to another system, you will still be required to type in the HDP during the POST each time the system is turned on.

  • If you have not set a Supervisor password (SVP) in addition to the HDP, you will also be prompted to enter the HDP every time the system resumes from suspend mode.

To set a hard disk password, follow these steps:

  1. Run the BIOS Setup by pressing and holding the F1 key and then turning on the computer.

  2. Select the Password icon and then the HDD-1 or HDD-2 icon, according to which drive you want to set.

  3. Type in your desired password and then press Enter. You can use any combination of up to seven alphanumeric characters (A–Z, 0–9). Letters are not case sensitive, meaning that upper- and lowercase letters are treated the same.

  4. Type in the password again to verify it. Then press Enter.

  5. Select Exit and then Restart.

To change a hard disk password, follow these steps:

  1. Turn off the system, wait at least 5 seconds, and then turn it back on.

  2. When the HDP prompt appears, type in the current password and then press the spacebar.

  3. Type in the new password and then press the spacebar. Remember to use no more than seven characters.

  4. Type in the new password again to verify it. Then press Enter.

To remove a hard disk password, follow these steps:

  1. Turn off the system, wait at least 5 seconds, and then turn it back on.

  2. When the HDP prompt appears, type in the current password, press the Spacebar, and then press Enter.

Most 2.5-inch laptop hard drives support the HDP feature, which can be set using the BIOS Setup in most laptop systems. The HDP can prevent any unauthorized user from ever accessing your hard disk, even if the drive is removed from the system. Make sure you keep a copy of the password in a safe place, because if you lose it, you have no way to ever access the drive again! Without the HDP, the drive and all your data will be forever locked up and inaccessible.

Supervisor Password (SVP)

The Supervisor password provides a different level of security than the POP. The SVP protects the hardware configuration (BIOS Setup) from unauthorized modification.

If a Supervisor password (SVP) is set on a system, you will normally be prompted (the SVP prompt normally appears as an image of a padlock next to a person) for the password only when the BIOS Setup is accessed.

The Supervisor password is provided for a system administrator to control multiple systems. The SVP is set by the system administrator, and subsequently is not required by the users to use the system. In other words, the users can start their systems without knowing or providing the SVP. The SVP is required only to access the BIOS Setup, and it provides the following security features:

  • Only a system administrator who knows the SVP can access the BIOS Setup. If a Supervisor password is set, a password prompt appears whenever you try to run the BIOS Setup.

  • A user can still set a different power-on password to protect his or her data from unauthorized use.

  • The system administrator can use the SVP to access the computer even if the user has set a POP. The SVP overrides the POP.

  • The SVP also overrides the hard disk password. The hard disk is protected by both the SVP and the HDP if both are set. If no HDP is set, the SVP also sets the HDP to the same password value.

A system administrator can set the same SVP on multiple systems to make administration easier.

To set a Supervisor password, follow these steps:

  1. Run the BIOS Setup by pressing and holding the F1 key while turning on the computer.

  2. Select the Password icon and then the Supervisor icon.

  3. Type in your desired password and then press Enter. You can use any combination of up to seven alphanumeric characters (A–Z, 0–9). Letters are not case sensitive, meaning that upper- and lowercase letters are treated the same.

  4. Type in the password again to verify it. Then press Enter.

  5. Select Exit and then Restart.

To change a Supervisor password, follow these steps:

  1. Run the BIOS Setup by pressing and holding the F1 key while turning on the computer.

  2. At the password prompt, type in the Supervisor password and then press Enter. The BIOS Setup screen should then appear.

  3. Select the Password icon and then the Supervisor icon.

  4. Type in the current password and then press the spacebar.

  5. Type in the new password and then press Enter.

  6. Type in the new password again to verify it. Then press Enter twice.

  7. Select Exit and then Restart.

To remove a Supervisor password, follow these steps:

  1. Run the BIOS Setup by pressing and holding the F1 key while turning on the computer.

  2. At the password prompt, type in the Supervisor password and press Enter. The BIOS Setup screen should then appear.

  3. Select the Password icon and then the Supervisor icon.

  4. Type in the current password and then press the spacebar.

  5. Press Enter twice.

  6. Select Exit and then Restart.

Note that when an SVP is set on a system, it automatically sets the HDP to the same value. The user will be unaware that any passwords are set, because in this situation when the system boots up, the BIOS will automatically provide both passwords and the system will appear to boot normally. However, as soon as an attempt is made to go into the BIOS Setup, or when the system hardware is upgraded or the hard disk is swapped into another system, it will refuse to boot unless the SVP (and HDP, which would be the same value) is provided.

CAUTION

If you are purchasing a used laptop system, be sure that all passwords, especially the Supervisor password and hard disk password, are cleared from the system, otherwise insure that you know for sure what they are. A system with these passwords set and yet unknown is almost worthless, because without the SVP and HDP, you will not be able to use the system or access the hard disk and will instead have an expensive paperweight.

POP, HDP, and SVP Password Cracking?

If you lose the hard disk password and/or the Supervisor password for a system, IBM and most other manufacturers will tell you straight out that pretty much all is lost. Here is a quote from IBM's documentation:

"If you forget your hard-disk-drive or supervisor password, there is no way to reset your password or recover data from the hard disk. You have to take your computer to an IBM reseller or an IBM marketing representative to have the hard disk or the system board replaced. Proof of purchase is required, and an additional charge might be required for the service. Neither an IBM reseller nor IBM marketing representative can make the hard disk drive usable."

Although this sounds pretty bleak, one company has broken the laptop hardware security, allowing both motherboards and hard drives with lost passwords to be recovered. The company is called Nortek (http://www.nortek.on.ca), and it's the first company I know of to figure out a way around the hardware security. Unfortunately, the recovery services aren't cheap, because the security chip must be removed from the motherboard as well as the drive, and a new one soldered in—a fairly delicate operation. The fees for hard drive recovery are as follows:

  • $85 for an HDP unlock only, with no data recovered and no testing or warranty on the drive

  • $145 for an HDP unlock with a 30-day warranty on the drive (still no data though)

  • $295 for an HDP unlock with all the data recovered as well

Considering that you can get a new 80GB or larger laptop hard drive for that price, you can see why you don't want to lose the HDP. Nortek can also recover a motherboard with a lost Supervisor password for a flat fee of $95.

Because of the possibility of theft, I do recommend setting both the SVP and HDP on your laptop system. That way, if the system is ever stolen, the thief not only won't be able to get to the data on your drive, but he or she won't be able to use the laptop itself, because the motherboard will be locked up. If the thief then tries to send it to Nortek, he or she will run into a policy Nortek has that states

"Nortek Co Ltd. realizes the significant responsibility that is associated with circumventing the security features of IBM ThinkPad laptop computers and their associated Travelstar hard disks. With our exclusive technology we provide hardware reclamation and data recovery services for only legitimate owners of these systems.

We will not knowingly recover lost passwords on equipment that has been unlawfully obtained. Nortek requires proof of ownership prior to performing any recovery procedures. Nortek retains the serial number from any system shipped to us for password removal. All systems received are thoroughly investigated to ensure the customer is the rightful owner; any suspicious units are dealt with promptly."

Nortek also has a link on its site to the Stolen Computer Registry at http://www.stolencomputers.org, which is a worldwide clearinghouse for information on stolen computers. If I had my system stolen, I would not hesitate to contact both the Stolen Computer Registry and Nortek to let them know the serial numbers of my system so they would be on the lookout for my system showing up for possible "recovery." That way, with the SVP and HDP both set, I can at least rest fairly assured that the thief will have a paperweight on his or her hands, with no access to my data.

Windows Passwords

The power-on password, hard disk password, and Supervisor password are all based on the system hardware and have nothing to do with Windows or any other operating system. As such, these hardware-based passwords do not preclude the use of additional passwords that can be set and maintained through Windows or other operating systems. Refer to your operating system documentation for more information on passwords maintained by the operating system.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020