Home > Articles > Operating Systems, Server > Solaris

This chapter is from the book

The Kernel

After the boot command initiates the kernel, the kernel begins several phases of the startup process. The first task is for OpenBoot to load the two-part kernel. The secondary startup program, ufsboot, which is described in the preceding section, loads the operating system kernel. The core of the kernel is two pieces of static code called genunix and unix. genunix is the platform-independent generic kernel file, and unix is the platform-specific kernel file. The platform-specific kernel used by ufsboot for systems running in 64-bit mode is named /platform/’uname -m’/kernel/sparcv9/unix. Solaris 10 only runs on 64-bit systems; however, early versions of Solaris gave you the option of running in 32-bit or 64-bit mode. On previous versions of Solaris, the 32-bit platform-specific kernel was named /platform/’uname -m’/kernel/unix. Now, in Solaris 10, /platform/’uname -m’/kernel/unix is merely a link to the 64-bit kernel located in the sparcv9 directory. When ufsboot loads genunix and unix into memory, they are combined to form the running kernel.

The kernel initializes itself and begins loading modules, using ufsboot to read the files. After the kernel has loaded enough modules to mount the root file system, it unmaps the ufsboot program and continues, using its own resources. The kernel creates a user process and starts the /sbin/init daemon, which starts other processes by reading the /etc/inittab file. (The /sbin/init process is described in the "System Run States" section, later in this chapter.)

The kernel is dynamically configured in Solaris 10. The kernel consists of a small static core and many dynamically loadable kernel modules. Many kernel modules are loaded automatically at boot time, but for efficiency, others—such as device drivers—are loaded from the disk as needed by the kernel.

A kernel module is a software component that is used to perform a specific task on the system. An example of a loadable kernel module is a device driver that is loaded when the device is accessed. Drivers, file systems, STREAMS modules, and other modules are loaded automatically as they are needed, either at startup or at runtime. This is referred to as autoconfiguration, and the kernel is referred to as a dynamic kernel. After these modules are no longer in use, they can be unloaded. Modules are kept in memory until that memory is needed. This makes more efficient use of memory and allows for simpler modification and tuning.

The modinfo command provides information about the modules that are currently loaded on a system. The modules that make up the kernel typically reside in the directories /kernel and /usr/kernel. Platform-dependent modules reside in the /platform/’uname -m’/kernel and /platform/’uname -i’/kernel directories.

When the kernel is loading, it reads the /etc/system file where system configuration information is stored. This file modifies the kernel’s parameters and treatment of loadable modules. It specifically controls the following:

  • The search path for default modules to be loaded at boot time as well as the search path for modules not to be loaded at boot time
  • The modules to be forcibly loaded at boot time rather than at first access
  • The root type and device
  • The new values to override the default kernel parameter values

The following is an example of the default /etc/system file:

login: login: root
Password:
Last login: Tue Jul 26 22:23:37 on console
Sun Microsystems Inc. SunOS 5.10  Generic January 2005
# cd /sbi
/sbi: does not exist
# cd /sbin
# ls init
init
# ls -l init
-r-xr-xr-x 1 root  sys  48984 Jan 22 2005 init
# cd /etc
# ls init
init
# ls -l init
lrwxrwxrwx 1 root  root   12 Feb 25 14:26 init -> ../sbin/init
# more /etc/system
*ident "@(#)system  1.18 97/06/27 SMI" /* SVR4 1.5 */
*
* SYSTEM SPECIFICATION FILE
*

* moddir:
*
*  Set the search path for modules. This has a format similar to the
*  csh path variable. If the module isn’t found in the first directory
*  it tries the second and so on. The default is /kernel /usr/kernel
*
*  Example:
*    moddir: /kernel /usr/kernel /other/modules



* root device and root filesystem configuration:
*
*  The following may be used to override the defaults provided by
*  the boot program:
*
*  rootfs:   Set the filesystem type of the root.
*
*  rootdev:  Set the root device. This should be a fully
*      expanded physical pathname. The default is the
*      physical pathname of the device where the boot
*      program resides. The physical pathname is
*      highly platform and configuration dependent.
*
*  Example:
*    rootfs:ufs
*    rootdev:/sbus@1,f8000000/esp@0,800000/sd@3,0:a
*
*  (Swap device configuration should be specified in /etc/vfstab.)



* exclude:
*
*  Modules appearing in the moddir path which are NOT to be loaded,
*  even if referenced. Note that ´exclude’ accepts either a module name,
*  or a filename which includes the directory.
*
*  Examples:
*    exclude: win
*    exclude: sys/shmsys



* forceload:
*
*  Cause these modules to be loaded at boot time, (just before mounting
*  the root filesystem) rather than at first reference. Note that
*  forceload expects a filename which includes the directory. Also
*  note that loading a module does not necessarily imply that it will
*  be installed.
*
*  Example:
*    forceload: drv/foo



* set:
*
*  Set an integer variable in the kernel or a module to a new value.
*  This facility should be used with caution. See system(4).
*
*  Examples:
*
*  To set variables in ‘unix’:
*
*    set nautopush=32
*    set maxusers=40
*
*  To set a variable named ‘debug’ in the module named ‘test_module’
*
*    set test_module:debug = 0x13

The /etc/system file contains commands that have this form:

set <parameter>=<value>

For example, the setting for the kernel parameter nfs:nfs4_nra is set in the /etc/system file with the following line:

set nfs:nfs_nra=4

This parameter controls the number of read-ahead operations that are queued by the NFS version 4 client.

Commands that affect loadable modules have this form:

set <module>:<variable>=<value>

For the most part, the Solaris OE is self-adjusting to system load and demands minimal tuning. In some cases, however, tuning is necessary.

If you need to change a tunable parameter in the /etc/system file, you can use the sysdef command or the mdb command to verify the change. sysdef lists all hardware devices, system devices, loadable modules, and the values of selected kernel-tunable parameters. The following is the output that is produced from the sysdef command:

* Hostid
*
 80a26382
*
* sun4u Configuration
*
*
* Devices
*
scsi_vhci, instance #0
packages (driver not attached)
  terminal-emulator (driver not attached)
  deblocker (driver not attached)
  obp-tftp (driver not attached)
  disk-label (driver not attached)
  SUNW,builtin-drivers (driver not attached)
  sun-keyboard (driver not attached)
  ufs-file-system (driver not attached)
chosen (driver not attached)
openprom (driver not attached)
  client-services (driver not attached)
options, instance #0
aliases (driver not attached)
memory (driver not attached)
virtual-memory (driver not attached)
pci, instance #0
  pci, instance #0
    ebus, instance #0
      auxio (driver not attached)
      power, instance #0
      SUNW,pll (driver not attached)
      se, instance #0
      su, instance #0
      su, instance #1
      ecpp (driver not attached)
      fdthree, instance #0
      eeprom (driver not attached)
      flashprom (driver not attached)
      SUNW,CS4231, instance #0 (driver not attached)
    network, instance #0
    SUNW,m64B, instance #0
    ide, instance #0
      disk (driver not attached)
      cdrom (driver not attached)
      sd, instance #1
      dad, instance #1
  pci, instance #1

Output has been truncated . . . . . . .


* System Configuration
*
 swap files
swapfile    dev swaplo blocks free
/dev/dsk/c0t0d0s3 136,11  16 1052624 1052624
*
* Tunable Parameters
*
 2498560  maximum memory allowed in buffer cache (bufhwm)
    1914  maximum number of processes (v.v_proc)
      99  maximum global priority in sys class (MAXCLSYSPRI)
    1909  maximum processes per user id (v.v_maxup)
      30  auto update time limit in seconds (NAUTOUP)
      25  page stealing low water mark (GPGSLO)
       1  fsflush run rate (FSFLUSHR)
      25  minimum resident memory for avoiding deadlock (MINARMEM)
      25  minimum swapable memory for avoiding deadlock (MINASMEM)
*
* Utsname Tunables
*
 5.10 release (REL)
 ultra5 node name (NODE)
 SunOS system name (SYS)
 Generic version (VER)
*
* Process Resource Limit Tunables (Current:Maximum)
*
0x0000000000000100:0x0000000000010000 file descriptors
*
* Streams Tunables
*
     9 maximum number of pushes allowed (NSTRPUSH)
 65536 maximum stream message size (STRMSGSZ)
  1024 max size of ctl part of message (STRCTLSZ)
*
* IPC Messages module is not loaded
* IPC Semaphores module is not loaded
* IPC Shared Memory module is not loaded
* Time Sharing Scheduler Tunables
*
60  maximum time sharing user priority (TSMAXUPRI)
SYS  system class name (SYS_NAME)

The mdb command is used to view or modify a running kernel and must be used with extreme care. The use of mdb is beyond the scope of this book; however, more information can be obtained from The Solaris Modular Debugger Guide available at http://docs.sun.com.

Configuring the kernel and tunable parameters is a complex topic to describe in a few sections of a chapter. This introduction to the concept provides enough information for the average system administrator and describes the topics you’ll need to know for the exam. If you are interested in learning more about the kernel and tunable parameters, refer to the additional sources of information described at the end of this chapter.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020