Home > Articles > Networking > Voice/IP Communications

  • Print
  • + Share This
Like this article? We recommend

Like this article? We recommend

Preparing Your YAC Client

To setup a machine (as in your wirelessly connected laptop, for example) as a YAC client all you need to do is install YAC—just as you did for the server. However, rather than choosing the YAC shortcut from the YAC folder, you want to choose the "YAC Listener" shortcut as shown in Figure 7.

At this point, you should see the YAC icon sitting in the Tray Notification Area as you did on your YAC Server. , You are now pretty close to receiving caller ID information from the YAC Server on our YAC Client. But first, we need to register our client with the YAC Server.

  • + Share This
  • 🔖 Save To Your Account