Home > Articles > Operating Systems, Server > Linux/UNIX/Open Source

  • Print
  • + Share This
This chapter is from the book

Verifying the Installation

When the installation is complete, the ZENworks Management Daemon (zmd) is running on your server. Confirm this using the following command:

/etc/init.d/novell-zmd status 

This status should be reported as running.

Confirm that the additional ZENworks services are running by using the following commands:

/etc/init.d/novell-zenloader status 
/etc/init.d/novell-zenserver status 
/etc/init.d/postgresql status 
/etc/init.d/ndsd status 
/etc/init.d/novell-zented status 
/etc/init.d/novell-zmgprebootpolicy status 
/etc/init.d/novell-pbserv status 
/etc/init.d/novell-proxydhcp status 
/etc/init.d/novell-zislnx status 
/etc/init.d/novell-tftp status 

Each of these services should be listed as running. If any services are not running, start them manually with the following command:

/etc/init.d/<servicename> start 

After you have verified that these services are all running, you can log in to the ZENworks Control Center.

  • + Share This
  • 🔖 Save To Your Account