Home > Articles > Certification > Microsoft Certification

This chapter is from the book

Apply Your Knowledge

Exercises

3.1 Handling Exceptions

Recall Step By Step 2.5 ("Common Dialog Boxes") from Chapter 2. This Step By Step demonstrated the use of common dialog boxes by creating a simple rich text editor. This editor allows you to open and save a rich text file. You can edit the text or change its fonts and colors. The program worked fine in all cases unless you tried to open or save a file that was already open; in this case the program throws a System.IO.IOException.

The objective of this exercise is to make a more robust version of this program that generates a warning about the open file rather than abruptly terminating the program.

Estimated Time: 15 minutes.

  1. Create a new Visual Basic .NET Windows application.

  2. Add a Windows Form to the project. Name this form Exercise3_1.

  3. Place five Button controls to the form. Name them btnOpen, btnSave, btnClose, btnColor, and btnFont and change their Text property to &Open..., &Save..., Clos&e..., &Color..., and &Font..., respectively. Place a RichTextBox control and name it rtbText. Arrange all controls as shown in Figure 3.12.

Figure 3.12
A simple rich text editor.

  1. Drag and drop the following components from the Toolbox to the form: OpenFileDialog, SaveFileDialog, ColorDialog, and FontDialog.

  2. Switch to the Code view and add the following line of code at the top of the form's module:

    Imports System.IO
  3. Double-click on the Open button to attach an event handler to its Click event. Add the following code to the event handler:

    Private Sub btnOpen_Click( _
     ByVal sender As System.Object, _
     ByVal e As System.EventArgs) _
     Handles btnOpen.Click
      ' Allow the user to select 
      ' only *.rtf files
      OpenFileDialog1.Filter = _
       "Rich Text Files (*.rtf)|*.rtf"
      If OpenFileDialog1.ShowDialog() = _
       DialogResult.OK Then
        Try
          ' Load the file contents 
          ' in the RichTextBox
          rtbText.LoadFile( _
           OpenFileDialog1.FileName, _
           RichTextBoxStreamType.RichText)
        Catch ioe As System.IO.IOException
          MessageBox.Show(ioe.Message, _
           "Error opening file")
        End Try
      End If
    End Sub
  4. Add the following code to handle the Click event of the Save button:

    Private Sub btnSave_Click( _
     ByVal sender As System.Object, _
     ByVal e As System.EventArgs) _
     Handles btnSave.Click
      ' Default choice to save file 
      ' is *.rtf but user can select
      ' All Files to save with other extension
      SaveFileDialog1.Filter = _
       "Rich Text Files (*.rtf)|*.rtf|" & _
       "All Files (*.*)|*.*"
      If SaveFileDialog1.ShowDialog() = _
       DialogResult.OK Then
        Try
          ' Save the RichText 
          ' content to a file
          rtbText.SaveFile( _
           SaveFileDialog1.FileName, _
           RichTextBoxStreamType.RichText)
        Catch ioe As System.IO.IOException
          MessageBox.Show(ioe.Message,_
           "Error saving file")
        End Try
      End If
    End Sub
  5. Add the following code to handle the Click event of the Close button:

    Private Sub btnClose_Click( _
     ByVal sender As System.Object, _
     ByVal e As System.EventArgs) _
     Handles btnClose.Click
      ' Close the form
      Me.Close()
    End Sub
  6. Add the following code to handle the Click event of the Color button:

    Private Sub btnColor_Click( _
     ByVal sender As System.Object, _
     ByVal e As System.EventArgs) _
     Handles btnColor.Click
      If ColorDialog1.ShowDialog() = _
       DialogResult.OK Then
        ' Change the color of selected text
        ' If no text selected, 
        ' change the active color
        rtbText.SelectionColor = _
         ColorDialog1.Color
      End If
    End Sub
  7. Add the following code to handle the Click event of the Font button:

    Private Sub btnFont_Click( _
     ByVal sender As System.Object, _
     ByVal e As System.EventArgs) _
     Handles btnFont.Click
      If FontDialog1.ShowDialog() = _
       DialogResult.OK Then
        ' Change the font of selected text
        ' If no text selected, 
        ' change the active font
        rtbText.SelectionFont = _
         FontDialog1.Font
      End If
    End Sub
  8. Set this form as the startup object for the project.

  9. Run the project. Click on the Open button and try to open an already opened file. You'll see an error message warning about the file being already open, as shown in Figure 3.13.

Figure 3.13
Error message warning user about an already open file.

3.2 Validating User Input

One of the techniques for input validation is to force the user to fix an erroneous field before allowing her to move to another field. To achieve this, you can set the Cancel property of the CancelEventArgs argument of the Validating event of a field to True.

In this exercise, you'll create a login form (see Figure 3.14) that accepts a username and a password. It forces the user to enter the username. The user should be also able to close the application by clicking the Cancel button irrespective of the validation status of the fields.

Estimated Time: 15 minutes.

  1. Add a new form to your Visual Basic .NET application.

  2. Place three Label controls, two TextBox controls named txtUserName and txtPassword, two Button controls named btnLogin and btnCancel and an ErrorProvider component named ErrorProvider1 on the form. The ErrorProvider component will be placed in the component tray. Arrange the controls in the form as shown in Figure 3.14.

Figure 3.14 The login form.

  1. Change the ControlBox property of the form to False, the CharacterCasing property of the txtPassword control to Lower and the CausesValidation property of btnCancel to False.

  2. Double-click the form to add an event handler for the Load event:

    Private Sub Exercise3_2_Load( _
     ByVal sender As System.Object, _
     ByVal e As System.EventArgs) _
     Handles MyBase.Load
      ErrorProvider1.SetIconAlignment( _
       txtUserName, _
       ErrorIconAlignment.MiddleLeft)
      ErrorProvider1.SetIconAlignment( _
       txtPassword, _
       ErrorIconAlignment.MiddleLeft)
    End Sub
  3. Declare the following variable outside a method block in the class:

    ' closingFlag is used to check 
    ' if user has clicked on the Close button
    Private closingFlag As Boolean = False
  4. Add the following code to the Click event handler of the Cancel button:

    Private Sub btnCancel_Click( _
     ByVal sender As System.Object, _
     ByVal e As System.EventArgs) _
     Handles btnCancel.Click
      closingFlag = True
      Me.Close()
    End Sub
  5. Add the following code to the Click event handler of the Login button:

    Private Sub btnLogin_Click( _
     ByVal sender As System.Object, _
     ByVal e As System.EventArgs) _
     Handles btnLogin.Click
      Dim strMessage As String = _
       String.Format( _
       "The following information:" & _
       vbCrLf & vbCrLf & "UserName: {0}" & _
       vbCrLf & vbCrLf & _
       "Password: {1}" & vbCrLf & vbCrLf & _
       " can be now passed to " & _
       " the middle-tier for validation", _
       txtUserName.Text, txtPassword.Text)
      MessageBox.Show(strMessage, _
       "User Input Validation Succeeded")
    End Sub
  6. Add code to handle the Validating events of the txtUserName and txtPassword controls:

    Private Sub txtUserName_Validating( _
     ByVal sender As Object, _
     ByVal e As System.ComponentModel. _
     CancelEventArgs) _
     Handles txtUserName.Validating
      If Not closingFlag Then
        If txtUserName.Text.Trim(). _
         Length = 0 Then
          ErrorProvider1.SetError( _
           txtUserName, _
           "Please enter a value " & _
           "for this field")
          e.Cancel = True
        ElseIf txtUserName.Text.Trim(). _
         IndexOf(" ") >= 0 Then
          ErrorProvider1.SetError( _
           txtUserName, _
           "You can NOT have spaces " & _
           "in this field")
          txtUserName.Select(0, _
           txtUserName.Text.Length)
          e.Cancel = True
        End If
      End If
    End Sub
    
    Private Sub txtPassword_Validating( _
     ByVal sender As Object, _
     ByVal e As System.ComponentModel. _
     CancelEventArgs) _
     Handles txtPassword.Validating
      If Not closingFlag Then
        If txtPassword.Text.Trim(). _
         Length = 0 Then
          ErrorProvider1.SetError( _
           txtPassword, _
           "Please enter a value " & _
           "for this field")
          e.Cancel = True
        ElseIf txtPassword.Text.Trim(). _
         IndexOf(" ") >= 0 Then
          ErrorProvider1.SetError( _
           txtPassword, _
           "You can NOT have spaces " & _
           "in this field")
          txtPassword.Select(0, _
           txtPassword.Text.Length)
          e.Cancel = True
        End If
      End If
    End Sub
  7. Add code to handle the Validated event of the txtUserName and txtPassword controls:

    Private Sub txtUserName_Validated( _
     ByVal sender As Object, _
     ByVal e As System.EventArgs) _
     Handles txtUserName.Validated
      ErrorProvider1.SetError(txtUserName, "")
    End Sub
    
    Private Sub txtPassword_Validated( _
     ByVal sender As Object, _
     ByVal e As System.EventArgs) _
     Handles txtPassword.Validated
      ErrorProvider1.SetError(txtPassword, "")
    End Sub
  8. Set this form as the startup object for the project.

  9. Run the project. If you click directly on the Login button, you will be forced to enter a username. However, you can click the Cancel button to close the application even without entering a valid username.

Review Questions

  1. What is the default behavior of the .NET framework when an exception is raised?

  2. Which is the base class of all the exceptions that provides the basic functionality for exception handling? What are the two main types of exception classes and their purposes?

  3. Explain the Message and InnerException properties of the Exception class.

  4. What is the purpose of Try and Catch blocks?

  5. How many Catch blocks can be associated with a single Try block? How should they be arranged?

  6. What is the importance of the Finally block?

  7. Can you associate custom error messages with the exception types defined by the CLR? If yes, how can you do this?

  8. What are some of the points you should consider before creating custom exceptions?

  9. What is the importance of the Validating event?

  10. Explain the purpose of the ErrorProvider component.

Exam Questions

  1. You are creating a data import utility for a personal information system that you designed recently. When the record in the source data file is not in the required format, your application needs to throw a custom exception. You will create an exception class with the name InvalidRecordStructureException. Which of the following classes would you choose as the base class for your custom exception class?

    1. ApplicationException

    2. Exception

    3. SystemException

    4. InvalidFilterCriteriaException

  2. You are assisting your colleague in solving the compiler error that his code is throwing. The problematic portion of his code is

    Try
      Dim success As Boolean = GenerateNewtonSeries(500, 0)
      ' more code here
    Catch dbze As DivideByZeroException
      ' exception handling code
    Catch nfne As NotFiniteNumberException
      ' exception handling code
    Catch ae As ArithmeticException
      ' exception handling code
    Catch e As OverflowException
      ' exception handling code
    End Try

    To remove the compilation error, which of the following ways would you modify the code?

    1. Try
        Dim success As Boolean = GenerateNewtonSeries(500, 0)
        ' more code here
      Catch dbze As DivideByZeroException
        ' exception handling code
      Catch ae As ArithmeticException
        ' exception handling code
      Catch e As OverflowException
        ' exception handling code
      End Try
    2. Try
        Dim success As Boolean = GenerateNewtonSeries(500, 0)
        ' more code here
      Catch dbze As DivideByZeroException
        ' exception handling code
      Catch ae As Exception
        ' exception handling code
      Catch e As OverflowException
        ' exception handling code
      End Try
    3. Try
        Dim success As Boolean = GenerateNewtonSeries(500, 0)
        ' more code here
      Catch dbze As DivideByZeroException
        ' exception handling code
      Catch nfne As NotFiniteNumberException
        ' exception handling code
      Catch e As OverflowException
        ' exception handling code
      Catch ae As ArithmeticException
        ' exception handling code
      End Try
    4. Try
        Dim success As Boolean = GenerateNewtonSeries(500, 0)
        ' more code here
      Catch dbze As DivideByZeroException
        ' exception handling code
      Catch nfne As NotFiniteNumberException
        ' exception handling code
      Catch ae As Exception
        ' exception handling code
      Catch e As OverflowException
        ' exception handling code
      End Try
  3. You need to debug a program containing some exception handling code. To understand the program better, you created a stripped down version of it and included some MessageBox statements that give clues about the flow of its execution. The program has the following code:
    Try
      Dim num As Integer = 100
      dim den as Integer = 0)
      MessageBox.Show("Message1")
      Try
        Dim res As Integer = num / den
        MessageBox.Show("Message2")
      Catch ae As ArithmeticException
        MessageBox.Show("Message3")
      End Try
    Catch dbze As DivideByZeroException
      MessageBox.Show("Message4")
    Finally
      MessageBox.Show("Message5")
    End Try

    Which of these is the order of messages that you receive?

    1. Message1
      Message2
      Message3
      Message4
      Message5
    2. Message1
      Message3
      Message5
    3. Message1
      Message4
      Message5
    4. Message1
      Message2
      Message4
      Message5
  4. What is the output displayed by the MessageBox in the following code segment?

    Try
      Try
        Throw _
        New ArgumentOutOfRangeException()
      Catch ae As ArgumentException
        Throw New ArgumentException( _
        "Out of Range", ae)
      End Try
    Catch ex As Exception
      MessageBox.Show( _
      ex.InnerException.GetType().ToString())
    End Try
    1. System.Exception

    2. System.ApplicationException

    3. System.ArgumentException

    4. System.ArgumentOutOfRangeException

  5. The Validating event of a text box in your Windows application contains the following code. The MyValidatingCode method validates the contents of the text box. If the contents are invalid, this method throws an exception and retains the focus in the text box. The line numbers in the code sample are for reference purpose only.
    01 Private Sub TextBox1_Validating( _
    02  ByVal sender As System.Object, _
    03  ByVal e As System.EventArgs) _
    04  Handles TextBox1.Validating
    05   Try
    06     MyValidatingCode()
    07   Catch ex As Exception
    08
    09     TextBox1.Select(0,       _textBox1.Text.Length)
    10     ErrorProvider1.SetError(textBox1,       _ex.Message)
    11   End Try
    12 End Sub

    Which of the following line of code should be in line 8?

    1. e.Cancel = True

    2. e.Cancel = False

    3. TextBox1.CausesValidation = True

    4. TextBox1.CausesValidation = False

  6. You have designed a Windows Form that works as a login screen. The form has two TextBox controls named txtUserName and txtpassword. You want to ensure that the user can only enter lowercase characters in the controls. Which of the following methods should you use?

    1. Set the form's KeyPreview property to True and program the KeyPress event of the form to convert uppercase letters to lowercase letters.

    2. Create a single event handler attached to the KeyPress event of both txtUserName and txtpassword. Program this event handler to convert the uppercase letters to lowercase.

    3. Use the CharacterCasing property of the controls.

    4. Use the Char.ToLower method in the TextChanged event handlers of the controls.

  7. You must create a custom exception class in your Windows application. You have written the following code for the exception class:

    Public Class KeywordNotFound
      Inherits ApplicationException
    
      Public Sub New()
        ' Code here
      End Sub
    
      Public Sub New( _
       ByVal message As String, _
       ByVal inner As Exception)
        MyBase.New(message, inner)
        ' Code here
      End Sub
    
    End Class

    A code review suggests that that you did not followed some of the best practices for creating a custom exception class. Which of these changes should you make? (Select two.)

    1. Name the exception class KeywordNotFoundException.

    2. Derive the exception class from the base class Exception instead of ApplicationException.

    3. Add one more constructor to the class with the following signature:

      Public Sub New(ByVal message As String)
        MyBase.New(message)
        ' Code here
      End Sub
    4. Add one more constructor to the class with the following signature:

      Public Sub New(ByVal inner As Exception)
        MyBase.New(inner)
        ' Code here
      End Sub
    5. Derive the exception class from the base class SystemException instead of ApplicationException.

  8. In your Windows application, you have created a dialog box that allows the user to set options for the application. You have also created a Help button that the user can press to get help on various options in the dialog box. You validate the data entered by the user in a TextBox control labeled Complex Script; if the user enters an invalid value in this text box, you set the focus back in the control by setting the cancel property of the CancelEventArgs object to True. While testing the application, you discovered that once you enter invalid data in the text box, you could not click on the Help button without correcting the data first. What should you do to correct the problem?

    1. Set the CausesValidation property of the text box to False.

    2. Set the CausesValidation property of the text box to True.

    3. Set the CausesValidation property of the Help button to False.

    4. Set the CausesValidation property of the Help button to True.

  9. You are writing exception handling code for an order entry form. When the exception occurs, you want to get information about the sequence of method calls and the line number in the method where the exception occurs. Which property of your exception class can help you?

    1. HelpLink

    2. InnerException

    3. Message

    4. StackTrace

  10. Your code uses the Throw statement in this fashion:

    Catch e As Exception
      Throw

    Which of these statements is true about this code?

    1. The Throw statement catches and rethrows the current exception.

    2. The Throw statement catches, wraps, and then rethrows the current exception.

    3. The Throw statement must be followed by an exception object to be thrown.

    4. The Throw statement transfers control to the Finally block following the Catch block.

  11. You are creating a Windows Form that works as a login screen for an Order Entry system designed for the sales department of your company. Which of the following strategies should you follow?

    1. Design a ValidateUser method. Throw a new custom exception named EmployeeNotFound when the entered username is not in the database.

    2. Design a ValidateUser method. Throw an ArgumentException exception when the user types special characters in the User name or Password text boxes.

    3. Design a ValidateUser method. It returns True if the username and password are correct; otherwise it returns False.

    4. Design a ValidateUser method. Throw an ApplicationException when the entered username is not in the database.

  12. You want to capture all the exceptions that escape from the exception handling code in your application and log them to Windows event log. Which of the following techniques would you use?

    1. Write all the code of the application inside a Try block, attach a generic Catch block to that Try block, and handle the exception there.

    2. Write all the code of the application inside a Try block, attach a Catch block that catches the super type of all exceptions (the Exception objects), and write code to make entries in the event log there.

    3. Program the ProcessExit event handler of the AppDomain class.

    4. Program the UnhandledException event handler of the AppDomain class.

  13. Which of the following is generally the most robust way to record the unhandled exceptions in your application?

    1. Create an entry in Windows event log.

    2. Create an entry in the application's custom event log.

    3. Create an entry in a table in Microsoft SQL Server 2000 database.

    4. Send an email using SMTP.

  14. The structured exception handling mechanism of the .NET Framework allows you to handle which of the following types of exceptions? (Select all that apply.)

    1. Exceptions from all CLS-compliant languages

    2. Exceptions from non-CLS–compliant languages

    3. Exceptions from unmanaged COM code

    4. Exceptions from unmanaged nonCOM code

  15. What is the result of executing this code snippet?

    Const someVal1 As Int32 = Int32.MaxValue
    Const someVal2 As Int32 = Int32.MaxValue
    Dim result As Int32
    
    result = someVal1 * someVal2
    1. The code will generate an OverflowException.

    2. The code will execute successfully without any exceptions.

    3. The code will cause a compile-time error

    4. The code executes successfully but the value of the variable result is truncated.

Answers to Review Questions

  1. The .NET framework terminates the application after displaying an error message when an exception is raised.

  2. The Exception class is the base class that provides common functionality for exception handling. The two main types of exceptions derived from Exception class are SystemException and ApplicationException. SystemException represents the exceptions thrown by the common language runtime, whereas ApplicationException represents the exceptions thrown by user code.

  3. The Message property describes the current exception. The InnerException property represents an exception object associated with the exception object; this property is helpful when a series of exceptions are involved. Each new exception can preserve information about a previous exception by storing it in InnerException property.

  4. The Try block encloses code that might raise an exception. The Catch block handles any exception raised by the code in the Try block.

  5. Zero or more Catch blocks can be associated with a single Try block. If no Catch block is associated with a Try block, a Finally block should follow the Try block; otherwise a compile-time error occurs. The Catch blocks should be arranged from specific to general exception types to avoid a compile-time error.

  6. The code contained by the Finally block always executes regardless of any exception in the application. Therefore, you can use the Finally block to write cleanup code to complete tasks, such as closing data connections, closing files, and so on, that need to be performed regardless of whether an exception occurred.

  7. Yes, you can associate custom error messages with the exception classes defined by the Common Language Runtime to provide more meaningful information to the caller code. The constructor of these classes that accepts the exception message as its parameter can be used to pass the custom error message.

  8. Custom exceptions should be derived from ApplicationException and should be created only if existing classes do not meet the requirements of your application. They should have a name ending with the word Exception and should implement the three constructors (default, Message, and Message and Exception) of their base class.

  9. The Validating event is the ideal place to store the field-level validation logic for a control. The Validating event handler can be used to cancel the event if validation fails, thus forcing the focus to the control. This forces the user to enter correct data.

  10. The ErrorProvider component in the Visual Studio .Net toolbox can be used to show validation-related error icons and error messages to the user.

Answers to Exam Questions

  1. A. When creating a class for handling custom exceptions in your programs, the best practice is to derive it from the ApplicationException class. The SystemException class is for system-defined exceptions. The Exception class is the base class for both ApplicationException and SystemException classes and should not generally be derived from directly.

  2. C. When you have multiple Catch blocks associated with a Try block, you must write them in order from the most specific to the most general one. The Catch block corresponding to the ArithmeticException should come at the end because it is a more general class than the three (DivideByZeroException, NotFiniteNumberException and the OverFlowException) classes derived from it.

  3. B. When an exception occurs in a Try block, it will search for a matching Catch block associated with that Try block. In this case, the ArithmeticException generates a match for DivideByZeroException because DivideByZeroException is derived from ArithmeticException, and the exception is handled right there. In all cases the Finally block is executed.

  4. D. The message box displays System.ArgumentOutOfRangeException because you caught and wrapped that exception in the InnerException property of the exception caught later by the outer Catch block.

  5. A. When you want to retain the focus inside a control after the Validating event is processed, you must set the Cancel property of the CancelEventArgs argument in the Validating event, so the correct answer is e.Cancel = True. The CausesValidation property has a different purpose: It decides whether a Validating event will be fired for a control.

  6. C. The CharacterCasing property when set to CharacterCasing.Lower for a text box will convert all uppercase letters to lowercase as you type them. It is the preferred way to enforce either lowercase or uppercase input in a text box.

  7. A, C. The best practices for exception handling recommend that you end the name of your exception class with the word Exception. In addition, an exception class must implement three standard contructors. The missing constructor is the one given in option C.

  8. C. When you want a control to respond regardless of the validation statuses of other controls, set the CausesValidation property of that control to True. Then the Help button should have its CausesValidation property set to False.

  9. D. The StackTrace property of the Exception class and the classes that derive from it contains information about the sequence of method calls and the line numbers in which the exception occurred. Therefore, it is the right property to use.

  10. A. The Throw statement just catches and throws the current exception.

  11. C. It is obvious that user can make typing mistakes while typing her username or password. You should not throw exceptions for these situations; you should rather design a ValidateUser method that returns a result indicating whether the login was successful.

  12. D. To capture all unhandled exceptions for an application, you must program the UnhandledEvent event handler of its AppDomian class.

  13. A. Logging to the Windows event handler is the most robust solution because the other solutions have more assumptions that can fail. Sometimes your application can loose connectivity with the database or with the SMTP server, or you might have problems writing an entry in a custom log file.

  14. A, B, C, D. The .NET Framework allows you to handle all types of exceptions including cross-language exceptions for both CLS- and nonCLS-complaint languages. It also allows you to handle exceptions from unmanaged code, both COM and nonCOM.

  15. C. Since you are multiplying two maximum possible values for integers, the result cannot be stored inside an integer. The compiler will detect it and will flag a compile-time error.

Suggested Readings and Resources

  1. Ritcher, Jeffery. Applied Microsoft .NET Framework Programming. Microsoft Press, 2001.

  2. Siler, Brian and Jeff Spotts. Special Edition Using Visual Basic .NET. Que, 2002.

  3. Visual Studio .NET Combined Help Collection

    • Best Practices for Exception Handling

    • Exception Handling Statements

    • Exception Management in .NET

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020