Home > Articles > Certification > Other IT

Configuring RIP and RDISC

Practice one of the Solaris 8 Certification exam objectives with expert Rafeeq Rehman's lesson on how configure RIP and RDISC.
This article is excerpted from Solaris 8 Training Guide (310-043): Network Administrator Certification, by Rafeeq Ur Rehman.
Like this article? We recommend

There are two commonly used dynamic routing methods available on Solaris to fill up routing tables. These are the Router Discovery Protocol (RDISC) and the Routing Information Protocol (RIP). RDISC is used to discover available routers on the networks. RDISC is run either in host mode or in router mode. If it is running in host mode, it only listens to router broadcasts. If it is running in router mode, it broadcasts messages on the network. RDISC uses the ICMP router discovery method. The in.rdisc daemon is used to support RDISC. RIP uses in.routed daemon and is started at the boot time. It is used to exchange routing information among hosts and routers. Both RIP and RDISC are standard TCP/IP protocols.

How Does a Host Determine if it is a Router?

A host acts as a router if one of the following conditions is true:

  • There are multiple /etc/hostname.interface files present. It shows that multiple network interfaces are configured. An example of this file is /etc/hostname.hme0 which shows the presence of the network interface hme0.

  • If someone configures multiple network interfaces manually using ifconfig command.

Configuring RDISC (in.rdisc)

The ICMP type field values 9 and 10 in the ICMP header part of the ICMP packet are used for RDISC. Type 9 is used for a router advertisement while type 10 is used for router selection. The in.rdisc daemon uses ICMP router discovery protocol and there are two modes of the daemon: The Host mode and the Router mode. RDISC uses multicast addresses to fill out routing tables. These modes are discussed in the following sections.

Running RDISC in Host Mode

When we start in.rdisc in host mode, in.rdisc listens to the ALL_HOSTS multicast address. This address is 244.0.0.1 and routers advertise messages on this address. At the start time, in.rdisc ignores all router advertisements except for those routers that are present on one of the directly connected networks. The higher preference routers are selected to enter default routing entries in the routing table.

Sometimes in.rdisc can also send router solicitation messages on the ALL_ROUTERS (224.0.0.2) multicast address to find available routers. The in.rdisc gives up if a response is not received after three solicitation messages.

Running RDISC in Router Mode

When started in router mode, in.rdisc starts listening to the ALL_ROUTERS multicast address. It starts sending messages on the ALL_HOSTS multicast address. Initially, it sends a number of advertisements in the first 30 seconds. After that in.rdisc advertises routing every 10 minutes.

If it finds any router solicitation message, it sends routing information to the requesting host.

The daemon is usually started through the /etc/rc2.d/S69inet script. Table 3.1 shows common command line options used with in.rdisc.

Table 3.1 Command line options used with in.rdisc

Option

Description

-r

Runs the daemon in router mode.

-p <preference>

Sets the preference number transmitted in solicitation messages. The default is zero.

-a

Accepts all routers ignoring preference. Normally in.rdisc accepts only routers with the highest preference.

-s

Sends three solicitation messages and if no response is received, it gives up.

-f

Runs in.rdisc forever even if no response is received to the initial solicitation messages.

-T <interval>

Sets the interval between consecutive advertisements. Default The default interval is 600 seconds.


NOTE

On the router, you should also run RIP in addition to RDISC to be able to exchange routing information among different routers. RDISC can't be used as a general purpose routing protocol on the Internet.

Disabling RDISC

To stop RDISC broadcasts, you may wish to disable it on some hosts. The easiest way to disable RDISC is to rename the /usr/sbin/in.rdisc file to a different name and reboot the system. Don't delete the file, you may need to enable RDISC again.

Configuring RIP (in.routed)

The in.routed daemon implements the Routing Information Protocol and is started using the /etc/rc2.d/S69inet script. It listens to port number 520 for routing information advertisements. It periodically exchanges routing tables with directly connected routers. It uses hop counts to find an optimal route to a destination. Hop count 16 and above are considered unreachable. This hop count is also called infinity. When exchanging routing table information, the daemon sends the hop count with each connected route. Depending upon information received from the neighboring routers, it automatically updates its own routing table. Updating the routing table is done if one of the following conditions is true:

  • The received packet contains information about a new route and the hop count is not infinity.

  • The update is received from the router through which packets are being forwarded to the destination.

  • A new route is received while the previous route has not been updated for 90 seconds and the new route is as cost effective as the old one.

  • The new route describes a shorter path than the existing one.

If an entry in the routing table has not been updated for three minutes, it is marked as infinity. Initially, the daemon checks the /etc/gateways file to fill out entries in the routing table.

RIP Advertisement by a Solaris Machine

You can use the snoop command to display what type of information is being advertised by RIP. Following is the output of the snoop –v command that shows one RIP packet with an advertisement route to network 192.168.2.0:

ETHER: ----- Ether Header -----ETHER: 
ETHER: Packet 24 arrived at 12:53:38.53
ETHER: Packet size = 66 bytes
ETHER: Destination = ff:ff:ff:ff:ff:ff, (broadcast)
ETHER: Source   = 8:0:20:9e:f0:50, Sun
ETHER: Ethertype = 0800 (IP)
ETHER: 
IP:  ----- IP Header -----
IP:  
IP:  Version = 4
IP:  Header length = 20 bytes
IP:  Type of service = 0x00
IP:     xxx. .... = 0 (precedence)
IP:     ...0 .... = normal delay
IP:     .... 0... = normal throughput
IP:     .... .0.. = normal reliability
IP:  Total length = 52 bytes
IP:  Identification = 47726
IP:  Flags = 0x4
IP:     .1.. .... = do not fragment
IP:     ..0. .... = last fragment
IP:  Fragment offset = 0 bytes
IP:  Time to live = 1 seconds/hops
IP:  Protocol = 17 (UDP)
IP:  Header checksum = f6d2
IP:  Source address = 192.168.2.222, fana-nt
IP:  Destination address = 192.168.2.255
IP:  No options
IP:  
UDP: ----- UDP Header -----
UDP: 
UDP: Source port = 520
UDP: Destination port = 520 (RIP)
UDP: Length = 32 
UDP: Checksum = 6E79 
UDP: 
RIP: ----- Routing Information Protocol -----
RIP: 
RIP: Opcode = 2 (route response)
RIP: Version = 1
RIP: 
RIP: Address            Port  Metric
RIP: 192.168.2.0   192.168.2.0   0   1

About this Article

This article is excerpted from Solaris 8 Training Guide (310-043): Network Administrator Certification, by Rafeeq Ur Rehman (New Riders Publishing, 2001, ISBN: 1578702615). Refer to chapter 3 for more detailed coverage of the material found in this article.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020