Home > Articles > Networking

  • Print
  • + Share This
This chapter is from the book

QoS Design Steps

While there are two explicit QoS policy requirements of a distribution switch (namely to trust DSCP on ingress and queuing policies), because of the default QoS settings on MQC-based platforms there is effectively only a single step to configuring QoS on a Catalyst 4500 in this role:

  1. Configure the ingress QoS model—which is recommended to be DSCP trust (and which is enabled by default on all MQC-based platforms).

  2. Configure egress queuing.
  • + Share This
  • 🔖 Save To Your Account