Home > Articles > Certification > Cisco Certification > CCNP

CCNP Security Firewall Cert Guide: Configuring ASA Interfaces

This chapter covers the following topics from the 642-618 exam objectives: Configuring Physical Interfaces, Configuring VLAN Interfaces, Configuring Interface Security Parameters, Configuring the Interface MTU, and Verifying Interface Operation.
This chapter is from the book

This chapter covers the following topics:

  • Configuring Physical Interfaces: This section discusses Cisco ASA interfaces that can be connected to a network through physical cabling, as well as the parameters that determine how the interfaces will operate.
  • Configuring VLAN Interfaces: This section covers logical interfaces that can be used to connect an ASA to VLANs over a trunk link.
  • Configuring Interface Security Parameters: This section explains the parameters you can set to assign a name, an IP address, and a security level to an ASA interface.
  • Configuring the Interface MTU: This section discusses the maximum transmission unit size and how it can be adjusted to set the largest possible Ethernet frame that can be transmitted on an Ethernet-based ASA interface.
  • Verifying Interface Operation: This section covers the commands you can use to display information about ASA interfaces and confirm whether they are operating as expected.

A Cisco Adaptive Security Appliance (ASA) must be configured with enough information to begin accepting and forwarding traffic before it can begin doing its job of securing networks. Each of its interfaces must be configured to interoperate with other network equipment and to participate in the IP protocol suite. This chapter discusses each of these topics in detail.

“Do I Know This Already?” Quiz

The “Do I Know This Already?” quiz allows you to assess whether you should read this entire chapter thoroughly or jump to the “Exam Preparation Tasks” section. If you are in doubt about your answers to these questions or your own assessment of your knowledge of the topics, read the entire chapter. Table 3-1 lists the major headings in this chapter and their corresponding “Do I Know This Already?” quiz questions. You can find the answers in Appendix A, “Answers to the ‘Do I Know This Already?’ Quizzes.”

Table 3-1. “Do I Know This Already?” Section-to-Question Mapping

Foundation Topics Section

Questions

Configuring Physical Interfaces

1–4

Configuring VLAN Interfaces

5–7

Configuring Interface Security Parameters

8–10

Configuring the Interface MTU

11

Verifying Interface Operation

12

  1. Which of the following answers describe an attribute of a redundant interface? (Choose all that apply.)

    1. A redundant interface load balances traffic across member interfaces.
    2. A redundant interface is made up of two or more physical interfaces.
    3. An ASA can have up to eight redundant interface pairs.
    4. Each member interface of a redundant interface cannot have its own security level.
    5. IP addresses must be applied to the member physical interfaces of a redundant interface.
    6. The member interfaces swap the active role when one of them fails.
  2. What must happen for a member interface to take over the active role as part of a redundant interface?

    1. Three hello messages must be missed.
    2. The link status of the current active interface goes down.
    3. A member interface, which was previously active before it went down, regains its link status.
    4. Its member priority is higher than other member interfaces.
    5. A timer must expire.
  3. Which ASA command can be used to display a list of all physical interfaces?

    1. how interfaces physical
    2. show interface list
    3. show hardware
    4. show version
    5. show ports
    6. show
  4. Suppose you want to double the bandwidth between an ASA’s outside interface and a neighboring switch. A single GigabitEthernet link exists today; a second link would also add redundancy. Which one of the following describes the best approach to meet the requirements?

    1. Bring up a second GigabitEthernet interface on the same VLAN as the first one.
    2. Configure the two interfaces as a redundant interface.
    3. Configure the two interfaces as an EtherChannel.
    4. Dual links are not possible on an ASA.
  5. You have been assigned the task of configuring a VLAN interface on an ASA 5510. The interface will use VLAN 50. Which one of the following sets of commands should be entered first to accomplish the task?

    1. interface vlan 50
      no shutdown
    2. interface ethernet0/0
      no shutdown
    3. interface ethernet0/0.5
      vlan 50 no shutdown
    4. interface ethernet0/0.50
      no shutdown
  6. Which of the following are correct attributes of an ASA interface that is configured to support VLAN interfaces? (Choose all that apply.)

    1. The physical interface operates as an ISL trunk.
    2. The physical interface operates as an 802.1Q trunk.
    3. The subinterface numbers of the physical interface must match the VLAN number.
    4. All packets sent from a subinterface are tagged for the trunk link.
    5. An ASA can negotiate a trunk link with a connected switch.
  7. Which one of the following answers contains the commands that should be entered on an ASA 5505 to create an interface for VLAN 6?

    1. interface vlan 6
    2. vlan 6
    3. interface ethernet0/0.6
    4. interface ethernet0/0.6
  8. Which of the following represent security attributes that must be assigned to an active ASA interface when the ASA is in routed firewall mode? (Choose three answers.)

    1. IP address
    2. Access list
    3. Interface name
    4. Security level
    5. Interface priority
    6. MAC address
  9. Which one of the following interfaces should normally be assigned a security level value of 100?

    1. outside
    2. dmz
    3. inside
    4. None of these answers are correct.
  10. An ASA has two active interfaces, one with security level 0 and one with security level 100. Which one of the following statements is true?

    1. Traffic is permitted to be initiated from security level 0 toward security level 100.
    2. Traffic is permitted to be initiated from security level 100 toward security level 0.
    3. Traffic is not permitted in either direction.
    4. The interfaces must have the same security level by default before traffic can flow.
  11. Suppose you are asked to adjust the MTU on the “inside” ASA interface Ethernet0/1 to 1460 bytes. Which one of the following answers contains the correct command(s) to enter?

    1. ciscoasa(config)# mtu 1460
    2. ciscoasa(config)# mtu inside 1460
    3. ciscoasa(config)# interface ethernet0/1
    4. ciscoasa(config-if)# mtu 1460
    5. None of these answers are correct; the MTU must be greater than 1500.
  12. From the following output, which of the following statements are true about ASA interface Ethernet0/2? (Choose all that apply.)

    ciscoasa# show nameif
    Interface                  Name                    Security
    Ethernet0/0                outside                   0
    Ethernet0/1                inside                  100
    Management0/0              management              100
    ciscoasa#
    ciscoasa# show interface ethernet0/2
    Interface Ethernet0/2 "", is administratively down, line protocol is down
      Hardware is i82546GB rev03, BW 100 Mbps, DLY 100 usec
            Auto-Duplex, Auto-Speed
            Input flow control is unsupported, output flow control is unsupported
            Available but not configured via nameif
            MAC address 001a.a22d.1dde, MTU not set
            IP address 10.1.1.1, subnet mask 255.255.255.0
            0 packets input, 0 bytes, 0 no buffer
            Received 0 broadcasts, 0 runts, 0 giants
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 pause input, 0 resume input
            0 L2 decode drops
            0 packets output, 0 bytes, 0 underruns
            0 pause output, 0 resume output
            0 output errors, 0 collisions, 1 interface resets
            0 late collisions, 0 deferred
            0 input reset drops, 0 output reset drops, 0 tx hangs
            input queue (blocks free curr/low): hardware (255/255)
            output queue (blocks free curr/low): hardware (255/255)
    ciscoasa#
    1. The interface is configured and is live on the network.
    2. The interface is not ready to use; the no shutdown command has not been issued.
    3. The interface is not ready to use; it doesn’t have an IP address configured.
    4. The interface is not ready to use; it doesn’t have a MAC address configured.
    5. The interface is not ready to use; it doesn’t have a security level configured.
    6. The interface is not ready to use; it doesn’t have an interface name configured.

      Answer E might also be true, but you cannot confirm that a security level has been configured from the command output given. Because an interface name has not been configured with the nameif command, neither the interface name nor the security level is shown in the output.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020