Home > Articles > Certification > Cisco Certification > CCNP

  • Print
  • + Share This
This chapter is from the book

This chapter is from the book

DHCP Client on a Cisco IOS Software Ethernet Interface

Router(config)#interface fastethernet 0/0

Moves to interface configuration mode.

Router(config-if)#ip address dhcp

Specifies that the interface acquire an IP address through DHCP.

NOTE: The ip address dhcp command can also be applied on an L3 switch at the SVI as well as any port where the no switchport command has been used.

  • + Share This
  • 🔖 Save To Your Account