Home > Articles

This chapter is from the book

Portable Peripherals

As the previous section illustrates, portable computers typically contain all the devices that users need to perform work away from the office; however, users have become accustomed to using additional items with their computers. For this reason, portables offer a wide range of I/O and expansion options to accommodate external FRU devices. The most common external devices used with portables include

  • External disk drives

  • External power sources and supplies

  • External I/O devices

Peripheral Storage Devices

With portable systems, external storage devices normally connect to one of the computer's PCMCIA slots, an I/O port connector, or a high-speed bus extension. Because portable units tend to be used with battery power, external storage devices also tend to employ separate, external power-supply units.

Several newer storage technologies, such as removable hard-drive media, have been designed to take advantage of the Type III PC-Card specification, or one of the new high-speed bus connections such as USB, FireWire, and SCSI ports. Some of these technologies are designed to use the portable's enhanced parallel port for connectivity with the system. These devices can be connected directly into the system's parallel port, or they can be connected to the system through another device that is connected to the port. The device's installation software is used to configure it for use with the system.

External Drive Units

The first laptops and notebooks incorporated the traditional single floppy-drive and single hard-drive concept that was typical in most desktop units. However, as CD-ROM drives and discs became the norm for new operating systems and software packages, a dilemma was created. Most notebook computers simply do not have enough room for three normal-size drive units. Even with reduced-size drives, the size limitations of most portables require that one of the three major drives be external.

External FDDs

Typically, the first item to be left out of a new notebook design is the internal floppy drive. So much of the latest software is distributed on CD-ROM that those drives now have preference in newer designs. Even so, so many applications still use floppies that an external FDD is almost always an add-on option for a new notebook. Large volumes of software are still available on floppies, and so many users have cherished data stored on floppies that an additional unit usually makes sense.

In some instances, portable manufacturers offer computer models that include interchangeable floppy and CD-ROM drive units for their units. Either of these drives can be installed in the portable system before starting it up. This arrangement prevents you from needing to purchase an extra component. It also keeps you from having to use one of the available PCMCIA slots for the floppy drive.

The external floppy comes as a complete unit with an external housing and a signal cable. As with other external devices, it requires an independent power source, such as an AC adapter pack. The external floppy drive's signal cable generally connects to a special FDD connector, such as the one shown in Figure 3.13.

Figure 3.13Figure 3.13 An external floppy drive.

External CD-ROM Drives

Prior to the CD-ROM drive becoming an accepted part of the notebook PC, some manufacturers produced external CD-ROM drives for use with these machines. They are still available as add-ons to all types of PCs. External CD-ROM drives typically connect to a SCSI host adapter or to an enhanced parallel port. The latter connection requires a fully functional, bidirectional parallel port and a special software device driver.

Figure 3.14 illustrates the installation of an external SCSI CD-ROM drive. Because the drive is external, connecting the CD-ROM unit to the system usually involves simply connecting a couple of cables together. First, connect the CD-ROM's power supply to the external drive unit. Before making this connection, verify that the power switch, or power supply, is turned off. Connect the signal cable to the computer. Finally, connect the opposite end of the cable to the external CD-ROM unit. Complete the installation by installing the CD-ROM driver software on the system's hard-disk drive.

Figure 3.14Figure 3.14 Installing an external CD-ROM drive.

External CD-RW and DVD-RW Drives

The installation process for external read/write CD-ROM and DVD drives is similar to installing external CD-ROM and DVD drives. These units connect to the system through a USB port, a FireWire port, an external SCSI connector, or a Cardbus adapter. Using these ports and buses, the system's PnP operation can detect any new hardware attached to the system when it is installed. However, most of the devices are nonstandard in nature and require that the OEM applications package be installed from the OEM CD that was packaged with the drive to control them.

In the Windows XP environment, read/write CD-ROM and DVD drives are supported directly from the operating system and don't require any third-party applications. When you insert a blank disc in one of these drives, the operating system detects it and pops up a dialog box that asks what you want to do with the disc. Most users still prefer to install a third-party program to manage all the functions of these drives.

Removable Storage

As with desktop systems, removable storage associated with portable systems includes floppies, CDs/CD-RWs and DVDs/DVD-RWs, and tapes. However, the portable computer industry is much more advanced when it comes to removable storage systems. Popular removable storage systems associated with portable computers include solid-state USB drives and PC Card drives. The PC Card versions of removable storage can consist of either mechanical or solid-state disk drives.

USB memory drives automatically load USB drivers and simply function as another drive in the system (for example, drive D:). Likewise, with PC Card disk drives, the entire peripheral is PnP and hot swappable.

Installing External Storage Devices

The general procedure for installing external storage devices is as follows:

  1. Configure the device for operation.

    1. Refer to the device's user manual regarding any configuration jumper or switch settings.

    2. Record the device's default configuration settings.

    3. Set the device's configuration settings to operate at the default setting.

  2. Install the device's PCMCIA adapter card (if necessary).

    1. Install the PC Card in the PCMCIA slot. The system should detect the presence of the new card in the slot and automatically configure it for operation.

  3. Make the device's external connections.

    1. Connect the device's signal cable to the appropriate connector on the notebook, or the PC Card.

    2. Connect the opposite end of the cable to the device.

    3. Verify that the power switch or power supply is turned off.

    4. Connect the power supply to the external storage unit.

  4. Configure the device's software.

    1. Turn on the system.

    2. Check the CMOS setup to ensure that the port setting is correct.

    3. Run the device's installation routine from the OEM disk or CD-ROM.

Portable Power Sources

Notebooks use detachable, rechargeable batteries and external power supplies, as illustrated in Figure 3.15. (Battery sizes vary from manufacturer to manufacturer.) They also employ power-saving circuits and ICs designed to lengthen the battery's useful time. The battery unit contains a recharging circuit that enables the battery to recharge while it is being used with the external power supply. Like other hardware aspects of notebook computers, there are no standards for their power-supply units.

Figure 3.15Figure 3.15 Laptop/notebook power supplies.

Like other computer power-supply types, portable power supplies, also referred to as AC adapters, convert commercial AC voltage into a single DC voltage that the computer can use to power its components and recharge its batteries. Similar DC-to-DC controllers are available; they permit notebook computers to draw power from a DC source such as cigarette lighter sockets in automobiles. From manufacturer to manufacturer, however, these AC and DC power converters often employ different connector types and possess different DC voltage and current-delivery capabilities. Therefore, a power supply from one notebook computer does not necessarily work with another portable model.

When you are obtaining a replacement or accessory adapter or controller, the best choice is to get the suggested model from the notebook manufacturer. But if you must get these devices from a third party, match the output voltage level of the original. Also make certain that the replacement unit is capable of delivering at least as much current as the original supply.

TIP

Be aware that the external power supply used with portable systems basically converts AC voltage into DC voltage that the system can use to power its internal components and recharge its batteries.

Because the premise of portable computers is mobility, you can assume that it is able to run without being plugged into an AC outlet. The question for most portables is how long it will run without being plugged in. This is the point where portable designs lead the industry. They continuously push forward in three design areas:

  • Better battery design

  • Better power-consumption devices

  • Better power management

Power Consumption

As mentioned earlier, power consumption consideration has been built into most devices intended for use with portable computers. Many of the Pentium chipsets provide a standby mode that turns off selected components, such as the hard drive and display, until a system event, such as a keyboard entry or a mouse movement, occurs. An additional power-saving condition, called suspend mode, places the system in a shut-down condition except for its memory units.

An additional power-saving mode, known as hibernate mode, writes the contents of RAM to a hard-drive file and completely shuts down the system. When the system is restarted, the feature reads the hibernate file back into memory, and normal operation is restarted at the place it left off.

Power Management

Each sector of the portable computer market has worked to reduce power-consumption levels, including software suppliers. Advanced operating systems include power-management features that monitor the system's operation and turn off some higher–power-consumption items when they are not in use (standby mode) and switch the system into a low–power-consumption sleep mode (suspend mode) if inactivity continues.

These modes are defined by a Microsoft/IBM standard called the Advanced Power Management (APM) standard. The hardware producers refer to this condition as green mode. The standard is actually implemented through the cooperation of the system's chipset devices and the operating system. Control of the APM system is provided through the BIOS's CMOS Setup utility, as described in Chapter 16, "CMOS RAM."

Most new portable computers possess a number of automatic power-saving features to maximize battery life. Some can be controlled through the Power menu of the Advanced CMOS Setup utility. If the Hard Disk Timeout value is set to 3 minutes, the Standby Timeout to 5 minutes, and the Auto Suspend value to 10 minutes, the following activities will occur:

  1. The hard disk will spin down after 3 minutes of inactivity.

  2. After 2 additional minutes of inactivity, the system will enter the standby mode.

  3. After 10 additional inactive minutes, the system will store the hibernation file on the hard drive and enter suspend mode.

The user also can enter the suspend mode by pressing a key combination for those times when he or she must step away from the computer for a few minutes but does not want to shut down. The POWER.EXE command must be loaded in a Device= line of the CONFIG.SYS file for APM to work properly under DOS 6.x or Windows 3.x. This command is not needed to run APM in Windows 9x.

When the system suspends operation, the following events take place:

  1. The video screen is turned off.

  2. The CPU, DMA, clocks, and math coprocessor are powered down.

  3. All controllable peripheral devices are shut down.

The amount of time the unit can remain in suspend mode is determined by the remaining amount of battery power. For this reason, data should be saved to the hard drive before voluntarily going to suspend mode. Pressing the computer's power button will return the system to its previous operational point.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020