Home > Articles

Implementing Quality of Service Over Cisco MPLS VPNs

This chapter covers the requirements for supporting the converged world of Multiprotocol Label Switching (MPLS) VPNs and how this maps to QoS policy applicable in the enterprise. The aim is to provide a deployable set of policies that the enterprise can use as guidelines. You'll also see how to address these policies to the service provider. Specifically, the QoS needs of Acme, Inc. are addressed in the case study.
This chapter is from the book

This chapter is from the book

This chapter covers the following topics:

  • Introduction to QoS
  • QoS Tool Chest: Understanding the Mechanisms
  • Building the Policy Framework
  • IP/VPN QoS Strategy
  • Identification of Traffic
  • QoS requirements for Voice, Video, and Data
  • The LAN Edge: L2 Configurations
  • Case Study: QoS in the Acme, Inc. Network
  • QoS Reporting

This chapter's objectives are to define the options and technical implementations for the various types of quality of service (QoS) required by enterprises for typical virtual private network (VPN) deployments. Service providers and enterprises typically build parallel networks to support the transport of data, voice, video, and mission-critical and non-mission-critical applications. With the move toward convergence, as well as the use of packet-based IP networks, the shift from circuit-switched division and parallel builds of network resources toward a single IP network is increasing. This chapter covers the requirements for supporting the converged world of Multiprotocol Label Switching (MPLS) VPNs and how this maps to QoS policy applicable in the enterprise. The aim is to provide a deployable set of policies that the enterprise can use as guidelines. You'll also see how to address these policies to the service provider. Specifically, the QoS needs of Acme, Inc. are addressed in the case study.

Introduction to QoS

Although the amount of bandwidth is increasing as higher-speed networks become more economically viable, QoS is not unnecessary. All networks have congestion points where data packets can be dropped, such as WAN links where a larger link feeds data into a smaller link, or a place where several links are aggregated into fewer trunks. QoS is not a substitute for bandwidth, nor does it create bandwidth. QoS lets network administrators control when and how data is dropped when congestion does occur. As such, QoS is an important tool that should be enabled, along with adding bandwidth, as part of a coordinated capacity-planning process.

Another important aspect to consider alongside QoS is traffic engineering (TE). TE is the process of selecting the paths that traffic will transit through the network. TE can be used to accomplish a number of goals. For example, a customer or service provider could traffic-engineer its network to ensure that none of the links or routers in the network are overutilized or underutilized. Alternatively, a service provider or customer could use TE to control the path taken by voice packets to ensure appropriate levels of delay, jitter, and packet loss.

End-to-end QoS should be considered a prerequisite with the convergence of latency-sensitive traffic, such as voice and videoconferencing along with more traditional IP data traffic in the network. QoS becomes a key element in delivery of service in an assured, robust, and highly efficient manner. Voice and video require network services with low latency, minimal jitter, and minimal packet loss. The biggest impact on this and other real-time applications is packet loss and delay, which seriously affects the quality of the voice call or the video image. These and other data applications also require segregation to ensure proper treatment in this converged infrastructure.

The application of QoS is a viable and necessary methodology to provide optimal perfor-mance for a variety of applications in what is ultimately an environment with finite resources. A well-designed QoS plan conditions the network to give access to the right amount of network resources needed by applications using the network, whether they are real-time or noninteractive applications.

Before QoS can be deployed, the administrator must consider developing a QoS policy. Voice traffic needs to be kept separate because it is especially sensitive to delay. Video traffic is also delay-sensitive and is often so bandwidth-intensive that care needs to be taken to make sure that it doesn't overwhelm low-bandwidth WAN links. After these applications are identified, traffic needs to be marked in a reliable way to make sure that it is given the correct classification and QoS treatment within the network.

If you look at the available options, you must ask yourself some questions that will inevitably help guide you as you formulate a QoS strategy:

  • Do I need to support real-time delay-sensitive applications?
  • Do I have mission-critical applications that require special handling?
  • Do I know which applications and services are being planned that may affect the strategy?
  • Does my selection correspond with what I am being offered by the service provider? If not, how do I make this transparent?
  • What current traffic patterns or aggregate application traffic should I take into consideration?

From these questions, you have various options: Define a policy that supports the use of real-time applications and that treats everything else as best-effort traffic, or build a tiered policy that addresses the whole. After all, QoS can provide a more granular approach to segmentation of traffic and can expedite traffic of a specific type when required. You will explore these options in this chapter.

After the QoS policies are determined, you need to define the "trusted edge," which is the place where traffic is marked in a trustworthy way. It would be useless to take special care in transporting different classes of network traffic if traffic markings could be accidentally or maliciously changed. You should also consider how to handle admission control—metered access to finite network resources. For example, a user who fires up an application that consumes an entire pipe and consequently affects others' ability to share the resource needs a form of policing.

Building a QoS Policy: Framework Considerations

Traffic on a network is made up of flows, which are placed on the wire by various functions or endpoints. Traffic may consist of applications such as Service Advertising Protocol (SAP), CAD/CAM, e-mail, voice, video, server replication, collaboration applications, factory control applications, branch applications, and control and systems management traffic.

If you take a closer look at these applications, it is apparent that some level of control over performance measures is necessary—specifically, the bandwidth and delay/jitter and loss that each class of application can tolerate. These performance measures can vary greatly and have various effects. If you apply a service level against these performance measures, it can be broadly positioned into four levels that drive the strategy:

  • Provisioning—The first step is ensuring that the correct transport is selected. Appropriate allocation of bandwidth ensures the proper start point for network design. Understanding application characteristics is key—what they will use in terms of network bandwidth and their delay, jitter, latency, and loss needs.
  • Best-effort service—The majority of application data flows fit this service level. Best-effort service provides basic connectivity with no guarantee for packet delivery and handling.
  • Differentiated service—Traffic at this service level can be grouped into classes based on their individual requirements. Each class is then treated according to its configured QoS mechanism.
  • Guaranteed service—Guaranteed service requires absolute allocation of specific resources to ensure that the traffic profiled to receive this service has its specific requirements met.

Applying these service levels against the application classes for their required level of service means that you need to understand where in the network they should be applied. The best approach is to define a "trust boundary" at the edge of the network where the endpoints are connected, as well as look at the tiers within the network where congestion may be encountered. After you know these, you can decide on the policy of application.

For example, in the core of the network, where bandwidth may be plentiful, the policy becomes a queue scheduling tool. However, at the edge of the network, especially where geographically remote sites may have scarce bandwidth, the policy becomes one of controlling admission to bandwidth. Basically, this is equivalent to shoving a watermelon down a garden hose—intact! Figure 5-1 outlines the high-level principles of a QoS application in network design.

Figure 1

Figure 5-1 Principles of QoS Application

This design approach introduces key notions to the correct road to QoS adoption. These notions provide the correct approach to provisioning before looking at classification of packets toward a requirement for a class of service (CoS) over the network. Determine where the trust boundary will be most effective before starting such a classification, and then indicate the area of the network where scheduling of packets to queues is carried out. Finally, determine the requirement of provisioning that is needed to ensure that sufficient bandwidth exists to carry traffic and its associated overheads.

After the network's QoS requirements have been defined, an appropriate service model must be selected. A service model is a general approach or a design philosophy for handling the competing streams of traffic within a network. You can choose from four service models:

  • Provisioning
  • Best-effort
  • Differentiated Services (DiffServ)
  • Guaranteed Services or Integrated Services (IntServ)

Provisioning is quite straightforward. It is about ensuring that there is sufficient base capacity to transport current applications, with forward consideration and thinking about future growth needs. This needs to be applied across the LANs, WANs, and MANs that will support the enterprise. Without proper consideration to provisioning appropriate bandwidth, QoS is a wasted exercise.

The best-effort model is relatively simple to understand because there is no prioritization and all traffic gets treated equally regardless of its type. The two predominant architectures for QoS are DiffServ, defined in RFC 2474 and RFC 2475, and IntServ, documented in RFC 1633, RFC 2212, and RFC 2215. In addition, a number of RFCs and Internet Drafts expand on the base RFCs—particularly RFC 2210, which explores the use of RSVP with IntServ. Unfortunately, the IntServ/RSVP architecture does not scale in large enterprises due to the need for end-to-end path setup and reservation. The service model selected must be able to meet the network's QoS requirements as well as integrate any networked applications. This chapter explores the service models available so that you can leverage the best of all three.

Implementing QoS is a means to use bandwidth efficiently, but it is not a blanket substitute for bandwidth itself. When an enterprise is faced with ever-increasing congestion, a certain point is reached where QoS alone does not solve bandwidth requirements. At such a point, nothing short of another form of QoS or correctly sized bandwidth will suffice.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020