Home > Articles > Certification > Cisco Certification > CCNP

CCNP Self-Study: Understanding and Configuring Multilayer Switching

This chapter provides you with details, architecture, and methods of multilayer switching on Catalyst switches. An understanding of multilayer switching is necessary for network designers, administrators, and operators for deployment and troubleshooting purposes.
This chapter is from the book

This chapter covers the following topics:

  • Multilayer Switching Architecture on Catalyst Switches
  • MLS Memory Table Architecture
  • CEF-Based MLS Configuration, Verification, and Troubleshooting

The purpose of this chapter is to provide you with details, architecture, and methods of multilayer switching on Catalyst switches. An understanding of multilayer switching is necessary for network designers, administrators, and operators for deployment and troubleshooting purposes.

The term multilayer switching refers to the ability of a Catalyst switch to support switching and routing of packets in hardware, with optional support for Layers 4 through 7 switching in hardware as well. As mentioned in Chapter 1, "Introduction to Building Cisco Multilayer Switched Networks," switching and routing in hardware (hardware switching) yields high throughput at or near line rate even with all ports sending traffic simultaneously.

With multilayer switches, the prime area of focus is often raw performance. Multilayer switches tend to have packet-switching throughputs in the millions of packets per second (pps), while traditional general-purpose routers have evolved from the 100,000 pps range to just over a million pps. Cisco Catalyst switches achieve this high rate of performance by using hardware switching.

In order for Catalyst switches to perform hardware switching, a route processor (Layer 3 engine) must download software-based routing, switching, access lists, QoS, and other information to the hardware for packet processing. To accomplish multilayer switching (packet processing in hardware), Cisco Catalyst switches use either the traditional multilayer switching (traditional MLS) or the Cisco Express Forwarding (CEF)-based MLS architecture. Traditional MLS is a legacy feature, whereas all leading-edge Catalyst switches support CEF-based multilayer switching (CEF-based MLS). Table 9-1 illustrates Catalyst switch support of traditional MLS and CEF-based MLS.

In terms of CCNP BCMSN exam preparation, you should focus on the following:

  • The path of a packet with CEF-based MLS
  • Understanding the differences between centralized and distributed switching
  • CEF troubleshooting commands

The section dealing with traditional MLS is outside the scope of the current CCNP BCMSN exam.

Table 9-1 Layer 3 Catalyst Switch Support of Traditional MLS and CEF-Based MLS

Catalyst Switch Family

MLS Mode of Operation

Catalyst 3550, 3560, and 3750

CEF-based MLS

Catalyst 4000 or 4500 running Cisco IOS and using Supervisor Engine II+, III, IV, or V

CEF-based MLS

Catalyst 5000 or 5500 with RSM or RSFC and NFFC or NFFC II

Traditional MLS

Catalyst 6500 with Supervisor Engine I with MSFC

Traditional MLS

Catalyst 6500 with Supervisor Engine II, Supervisor 32, or Supervisor 720 with MSFC

CEF-based MLS

Understanding Traditional MLS

MLS enables specialized application-specific integrated circuits (ASIC) to perform Layer 2 rewrite operations of routed packets. Layer 2 rewrites include rewriting the source and destination MAC addresses and writing a recalculated cyclic redundancy check (CRC). Because the source and destination MAC addresses change during Layer 3 rewrites, the switch must recalculate the CRC for these new MAC addresses.

For Catalyst switches that support traditional MLS, the switch learns Layer 2 rewrite information from an MLS router via an MLS protocol. Another name for traditional MLS is NetFlow-based switching. With traditional MLS, the Layer 3 engine (route processor) and switching ASICs work together to build Layer 3 entries on the switch. Each of these Layer 3 entries is populated in one of the following ways:

  • Source IP address exclusively (S)
  • Source and destination IP address (S/D)
  • Full Flow Information with Layer 4 protocol information (FFI)

With traditional MLS, the switch forwards the first packet in any flow to the Layer 3 engine for processing using software switching. After the routing of the first packet in the flow, the Layer 3 engine programs the hardware-switching components for routing for subsequent packets. Figure 9-1 illustrates these fundamentals of traditional MLS.

In Figure 9-1, when workstation A sends a packet to workstation B, workstation A sends the packet to its default gateway. In Figure 9-1, the default gateway is the RSM. The switch (MLS-SE) recognizes this packet as an MLS candidate packet because the destination MAC address matches the MAC address of the MLS router (MLS-RP). As a result, the switch creates a candidate entry for this flow. Next, the router accepts the packets from workstation A, rewrites the Layer 2 destination MAC address and CRC, and forwards the packet to workstation B. The switch refers to the routed packet from the RSM as the enabler packet. The switch, upon seeing both the candidate and enabler packets, creates an MLS entry in hardware such that the switch rewrites and forwards all future packets matching this flow. The MLS switched packet arrow in Figure 9-1 indicates this flow. This behavior is very different from CEF-based MLS.

Figure 1

Figure 9-1 Fundamentals of Traditional MLS

On the Catalyst 5000 family of switches, MLS requires specialized supervisors and line modules and a router. In addition, MLS on Catalyst 5000 requires manual configuration. On the Catalyst 6500 family of switches with a Supervisor I Engine with an MSFC, all the line modules support MLS. In addition, this hardware combination uses MLS by default and configuration of MLS is not required. For more details on and examples of the MLS architecture, consult the following technical documents at Cisco.com.

  • "Configuring and Troubleshooting IP MLS on Catalyst 6000 Switches with an MSFC," Document ID: 10566

  • "Troubleshooting IP Multilayer Switching," Document ID: 10554

Traditional MLS is a legacy feature; all leading-edge and future Catalyst switches support CEF-based MLS. The next section and the remainder of this chapter discuss CEF-based MLS and its architecture.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020