Home > Articles > Programming

Document/View Architecture in Visual Studio

  • Print
  • + Share This
Follow four practical guides through this useful architecture and learn how to build Document/View applications, what makes them tick, and how they can give your apps more functionality and expandability.
This chapter is from the book

This chapter is from the book

In this chapter

The Document/View architecture is used, with minimal overhead, to provide applications a way to separate data from visualizations of that data in one or more windows.

This is one of the least understood aspects of the Visual Studio framework and often the cause of much debate. Used correctly, however, the Document/View architecture provides a lot of functionality and future expandability to an application.

In this chapter, you will find some practical guides to using this framework effectively, as well as a description of it.

  • "MFC Under the Hood: Creating an MFC Application" provides a feet-first approach to building Document/View applications from the ground up, with some quick information about what's going on.

  • "Using Better Tracing to Understand the Doc/View Architecture" gives those wishing to get an in-depth understanding of the structure of the Document/View architecture a clear picture of what makes it tick.

  • "Command Routing Beyond a Split Frame" describes a simple technique to enable inactive views to process commands.

  • "Replacing a View in a Doc-View Application" is an extremely useful article I find myself referring to on a regular basis. The article describes how to seamlessly swap between various view types at runtime.

MFC Under the Hood: Creating an MFC Application

This article was contributed by Andrew Fenster.

Environment: Visual C++

Most of the time when you are creating a new MFC application, you'll start with the MFC App Wizard. The App Wizard generates a basic skeleton application, which you will flesh out into a full-fledged, useful program.

Even the skeleton application you get from the App Wizard contains a lot of very arcane-looking code, and there's a great deal of hidden code as well. The purpose of this article is to demystify some of that code. I'll show you how to build a simple MFC application without the App Wizard. By the time you are done, the mysterious-looking code that comes from the App Wizard will no longer be so mysterious, and you'll be better prepared to modify it to suit your own purposes.

The Hidden Code First

Every 32-bit Windows application has two essential program elements: WinMain and WndProc. Your program will have one WinMain for the entire program and one WndProc for each window in the program. Although MFC creates these for you, you still need to know a little about them.

WinMain is the function that starts your application. Once your application is running, the Windows operating system will start placing your application's messages in a message queue. WinMain makes three Windows API calls to get these messages from the operating system and to process them. First, it calls GetMessage to retrieve a message. Then, it calls TranslateMessage to perform any necessary conversion of the message. Finally, WinMain calls DispatchMessage, which tells the operating system to send the message to the appropriate WndProc for handling.

Once WndProc receives a message, it looks through its message handlers for instructions on what should be done with the message. Your job as a Windows application programmer is to write the handlers.

A Simple MFC Application: Less than 20 Lines of Code

Next, we'll look at a simple, bare-bones MFC application. MFC provides WinMain and WndProc. We must provide an MFC-derived application class and window management class.

Our application class will be derived from the MFC class CWinApp. CWinApp provides all the member variables and functions to initialize, start, run, and close an application. CWinApp contains a pointer called m_pMainWnd, which will point to an object of our derived window management class. Each MFC application has one and only one object derived directly from CWinApp. In the example below, that class is called "CMyApp."

Our window management class will be derived from CFrameWnd. CFrameWnd has all the member variables and functions to create and manage windows. Note that when you create an object of our derived windows class, you have not created an actual window. The new object uses its Create() function to create windows.

Here's what happens when we start our program. You can follow along in the code:

  1. WinMain runs this code: CMyApp app;. This creates an object of type CMyApp named "app". app will have all the member variables and functions of CWinApp that are needed to start, run, and close our application.

  2. Then WinMain calls app's InitInstance() function. InitInstance() creates a new CMyWnd object with m_pMainWnd = new CMyWnd;.

  3. The CMyWnd constructor calls its Create() function, which creates an instance of the window but does not display it.

  4. The app's InitInstance() function then displays the window with m_pMainWnd-> ShowWindow(m_nCmdShow);.

  5. WinMain calls the app's Run() function, which dispatches messages to the rest of the application.

Here is the code. Try it—it works!

   #include <afxwin.h>

   //derive my own window class from CFrameWnd
   class CMyWin: public CFrameWnd
   {
     public:
     CMyWin( );
     DECLARE_MESSAGE_MAP( )
   };

   //define my window class' constructor:
   CMyWin::CMyWin( )
   {
     Create(0, "This Text Will Appear in the Title Bar");
   }

   //derive my own application class from CWinApp
   class CMyApp: public CWinApp
   {
     public:
     virtual BOOL InitInstance( );
   };

   //define my application class' InitInstance( )
   BOOL CMyApp::InitInstance( )
   {
     m_pMainWnd = new CMyWin( );
     m_pMainWnd->ShowWindow(m_nCmdShow);
     m_pMainWnd->UpdateWindow();
     return TRUE;
   }

   //here is my application's message map
   BEGIN_MESSAGE_MAP(CMyWin, CFrameWnd)
     // any messages to be processed by
     // CMyWin get listed here.
   END_MESSAGE_MAP( )

   //declare an instance of application
   //class for WinMain to use.
   CMyApp app;

Figure 3.1 shows what you get when you compile and run.

Figure 3.1Figure 3.1

Your actual window will be bigger.

Single Document Interface Applications

The code from the preceding section creates a simple, bare-bones application. The code that you will find in a single document interface application is more complicated, but it still works along the same lines. You still have an application class derived from CWinApp. You still have a window management class derived from CFrameWnd. In this case, however, the derived window management class is called CMainFrame.

Your derived application class still has an InitInstance() function, but the function looks a lot more complicated. Among other things, it contains something like this:

   CSingleDocTemplate* pDocTemplate;
   pDocTemplate = new CSingleDocTemplate(
     IDR_MAINFRAME,
     RUNTIME_CLASS(CMyDoc),
     RUNTIME_CLASS(CMainFrame), // main SDI frame window
     RUNTIME_CLASS(CMyView));
   AddDocTemplate(pDocTemplate);

Here, the application object creates a single document template pointer and points it to a new single document template object. There are four parameters passed to the CSingleDocTemplate constructor. The first is an integer, the resource ID for the IDR_MAINFRAME resource. The next three parameters pass class information for my Document class, Frame class, and View class. Then the pointer to this new CSingleDocTemplate is added to the list of document templates maintained by the application object. (In an SDI application, there's only one template.)

IDR_MAINFRAME is a resource containing

  1. The application's icon

  2. The application's menu

  3. The accelerator table that goes with the menu

  4. A document string

The document string contains up to seven pieces of information in substrings separated by "\n" characters:

  1. The title that appears in the frame window's title bar.

  2. The title assigned to new documents. If omitted, the default is "Untitled."

  3. A description of the document type in an MDI application. This substring isn't used in an SDI application.

  4. A description of the document type, followed by its default file name extension, for example, "My Big Program(*.mbp)."

  5. The three letter extension for the document type, for example, ".mbp."

  6. A name with no spaces that identifies the document type in the registry.

  7. A descriptive name of the document type, for example, "My Big Program Document."

Here's a sample string:

"My Big Program\n\n\nMy Big Program(*.mbp)\n.mbp\
   nBigProgram\nMBP Document."

Conclusion

So there you have it. Now that you know a little more about what your wizard- generated code is doing, you can go in and start modifying it. For example, if you want to change the size and positioning of your application's main window, you can modify the Create() function. Try substituting the following code for the Create() function listed in the previous example. You'll get a much smaller window positioned in the upper left corner of the screen.

  RECT x;
  x.top = 30;
  x.left = 30;
  x.bottom = 300;
  x.right = 300;
  Create(NULL, "My New Window", WS_OVERLAPPEDWINDOW, x);

There are a lot of settings and functions you can play with. You might be the type who never changes the default code. Even so, the more you know about what's going on, the better your programs will be.

  • + Share This
  • 🔖 Save To Your Account