Home > Articles > Networking > Network Design & Architecture

WDM Network Design

This sample chapter explores some of the design constraints involved in the WDM network design.
This chapter is from the book

Introduction to Optical Design

A network planner needs to optimize the various electrical and optical parameters to ensure smooth operations of a wavelength division multiplexing (WDM) network. Whether the network topology is that of a point-to-point link, a ring, or a mesh, system design inherently can be considered to be of two separate parts: optical system design and electrical or higher-layer system design. To the networking world, the optical layer (WDM layer) appears as a barren physical layer whose function is to transport raw bits at a high bit rate with negligible loss. Most conventional network layer planners do not care about the heuristics of the optical layer.

However, such lapses can often be catastrophic. Until the bit rate and the transmission distance is under some bounded constraint (for example, small networks), it is often not important to consider the optical parameters.

However, as the bit rate increases and transmission length increases, these optical parameters have the capability of playing truant in the network. A network planner must consider the affecting parameters and build a network that accommodates the impairments caused by the optical parameters. This chapter explores some of the design constraints involved in the WDM network design.

Consider an optical signal as a slowly varying signal of amplitude A (τ, t) (function of distance 'τ' and time 't'), on which various parameters are acting at all times. An optical signal, as discussed in Chapter 1, "Introduction to Optical Networking," propagates through a silica fiber with propagation constant β, whose value is obtained from the solution of the basic wave equations. Further, this optical signal is subjected to attenuation, which by virtue of itself, is a property of the propagating medium—silica fiber in this case. Attenuation in a fiber is characterized by the attenuation constant α, which gives the loss (in dB) per traveled km.

Why is attenuation parameter important? First, common thinking says that if the total accumulated attenuation is greater than the signal input launch power Pin, a signal will not exist at the receiving end. This, although colloquial, is an important issue for verifying signal reception at the receiving end of a communication channel. Second, for optical communication to happen, a receiver (essentially a photodetector, either a PIN or APD type) needs a minimum amount of power to distinguish the 0s and 1s from the raw input optical signal.

The minimum power requirement of the receiver is called the receiver sensitivity, R, and is covered in Chapter 2, "Networking with DWDM-1." Here, we must ensure that the transmit power is high enough so that it can maintain signal power > R at the receiver end, despite the attenuation along the transmission line. That does not mean that if we increase the transmit power to a high level, we can send bits across great distances. High input power also is a breeding ground for impairments (nonlinearities such as cross-phase modulation [XPM], self-phase modulation [SPM], four-wave mixing [FWM] and so on). In addition, an upper limit exists for every receiver (APD type or PIN type) for receiving optical power. This is given by the dynamic range of the receiver, and it sets the maximum and minimum power range for the receiver to function. For example, –7 dBm to –28 dBm is a typical dynamic range of a receiver. Therefore, the maximum input power that we can launch into the fiber is limited. This also limits the maximum transmission distance, L. If PinMax is the maximum input power, the transmission distance is L, and Pr is the minimum receiver power; then Equation 4-1 shows the maximum input power that can be sent into the fiber and Equation 4-2 shows the maximum transmission distance.

Equation 4-1

Equation 4-2

NOTE

The optical power at the receiver end has to be within the dynamic range of the receiver; otherwise, it damages the receiver (if it exceeds the maximum value) or the receiver cannot differentiate between 1s and 0s if the power level is less than the minimum value.

For an input power of +5 dB and a receiver sensitivity of –20 dBm at 1550 nm, the maximum transmission distance without amplification is shown in the following equation. (Assume α = 0.2 dB/km at 1550 nm. We usually get α from the manufacture's spec.)

(Here we neglected all other losses.)

Further in the preceding calculation, we have neglected dispersion, fiber nonlinearities, polarization, spectral broadening, chirp (source broadening), fiber plant losses (connecters, splices, and aging factors), and so on. If we consider these effects, then the maximum length is reduced further. How can we then have ultra long-haul intercontinental systems? By placing repeaters in cascade, we can enhance the transmission distance.

Two kinds of repeaters exist: opto-electro-opto (OEO) electrical repeaters that detect, reshape, retime, and retransmit (3R) the signal (channel-by-channel), and the fiber amplifiers (1R)(doped fiber, Raman, and SOA) that boost the signal power level (no reshape and no retiming) entirely in the optical domain. A third technique also exists: reshape and reamplify (2R) regeneration. This technique is gaining in popularity due to its protocol independence. This book discussed 2R in Chapter 2, so it is not necessary to consider it here from a design perspective because it proposes a generic alternative to the other design schemes.

Electrical repeaters have an advantage in that they can completely relaunch the signal by regenerating and further retransmitting it due to opto-electronic conversion and regeneration. To do so, the composite WDM signal needs to be fully demultiplexed, which is neither cost effective nor efficient. Optical amplifiers alleviate that problem by amplifying all the channels together completely in the optical domain; therefore, optical amplifiers can enhance the transmission distance. So, does that mean that optical amplifiers can increase the amplifying distance as much as they wants? Not really! Amplifiers come at a price and induct a trade off; they enhance the signal power level, but at the same time, they add their own complement of noise. This noise is amplified spontaneous emission (ASE), which was introduced in Chapter 3, "Networking with DWDM -2." Please refer to Figure 4-1.

Figure 4-1Figure 4-1 Single Stage Amplifier and Noise Associated with Signal

The noise is random in nature, and it is accumulated at each amplification stage. Refer to Figure 4-2.

Figure 4-2Figure 4-2 Noise Accumulation Resulting from Multistage Amplification

Amplifier noise is a severe problem in system design. A figure of merit here is the optical signal-to-noise ratio (OSNR) requirement of the system. The OSNR specifies the ratio of the net signal power to the net noise power. It is a ratio of two powers; therefore, if a signal and noise are both amplified, system OSNR still tells the quality of the signal by calculating this ratio. System design based on OSNR is an important fundamental design tool.

NOTE

OSNR is not just limited to optical amplifier-based networks. Other active and passive devices can also add noise and create an OSNR-limited system design problem. Active devices such as lasers and amplifiers add noise. Passive devices such as taps and the fiber can add components of noise. In the calculation of system design, optical amplifier noise is considered the predominant source for OSNR penalty and degradation. That does not imply unimportance to other sources of OSNR penalty.

Figures 4-1 and 4-2 shows the effect of noise on signal as the signal and noise pass through the amplifiers.

Dispersion, mentioned in Chapter 1, causes pulse spreading. The most important form of dispersion is group velocity dispersion (GVD). Group velocity is inversely proportional to the rate of change of propagation constant β with respect to frequency. Isn't β a constant? Not really! β actually (indirectly) depends on γ, the nonlinear coefficient, and P, the power of the signal. β further depends on the group index, which in turn depends on the GVD parameters. Therefore, dispersion causes severe pulse spreading and leads to intersymbol interference (ISI). The GVD parameter β2 is the second order differential of the β with respect to change in optical frequency-omega.

Techniques are available to compensate dispersion. Note here that the dispersion discussed so far (GVD) is called chromatic dispersion as opposed to other forms of dispersion, such as polarization mode dispersion, or PMD. (PMD is discussed from a design point of view in Chapter 5, "WDM Network Design -2".) Dispersion flattened or shifted fibers are an example. Dispersion shifted fibers (DSFs) have the zero-dispersion wavelength shifted into the operating band. Further dispersion-compensating fibers can be placed at strategic locations in a network so that we can reshape the broadened pulse as desired. Yet another technique is to use fine fiber Bragg gratings (FBGs)-based dispersion compensators. The question still remains: In a network, where do we place the dispersion compensators? Dispersion compensation is needed only for signals above a certain bit rate.

Another design issue is polarization. Assuming fibers to be polarization preserving is not a good idea. Different polarization states create different levels of PMD. PMD compensation and placement is yet another strong issue at high bit rate signals.

Last but not least, we need to consider fiber nonlinearities. Self-phase modulation and cross phase modulation are two common coupling problems. FWM, stimulated Raman scattering (SRS), and stimulated Brillouin scattering (SBS) are also high bit rate, high power issues.

A system design can be optimized by considering these effects in a strategic manner. The sections that follow consider several steps that need to be considered in an ideal system design case. Initially, let's assume a point-to-point link and then specifically look at ring and mesh networks in Chapter 5.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020