Home > Articles > Networking

VRRP Overview

Get an inside look at VRRP (Virtual Router Redundancy Protocol) and when you should incorporate VRRP into your network.
This chapter is from the book

This chapter gives an overview of the VRRP as a redundancy protocol without going into the details of used messages, the details of the states the protocol specifies, and the details to be taken into account while operating the protocol. Chapter 4 provides these details. Here we first put VRRP in context to articulate the significance of the function VRRP protects; then we talk about the special circumstances that necessitate a protocol such as VRRP. After establishing the context, we introduce basic VRRP concepts by using a series of simple configurations for didactic purposes. This approach helps us to explore some basic characteristics of the protocol: What is the typical VRRP configuration for establishing some level of load sharing? How is M-to-N redundancy established with VRRP?

The coverage of the basic elements of the protocol makes it possible to study some more realistic cases from the last section of this chapter. The last section discusses some typical VRRP deployment configurations before summarizing the covered topics.

2.1  The Case for VRRP

To provide a usage context for VRRP we consider an enterprise network connecting a corporate office to multiple branch offices in different regions. Figure 2-1 represents such an enterprise network.

Figure 5FIGURE 2-1. An enterprise network

A cloud—that is, a network of unspecified type and topology, but typically a Wide Area Network (WAN)—connects the branch offices to the corporate office, the headquarters of the enterprise. This WAN may consist of leased circuits, an X.25 packet network, a Frame Relay, or an ATM network. Another possibility is a traditional IBM's Systems Networking Architecture (SNA). But the cloud may also be representing an IP-based network of networks: a private internet or Internet with a capital I.

The data center containing all business-critical databases resides in the corporate office, as does the network management center providing services essential to the operation of the corporate network. Finance department, payroll, human resources, and some other business functions are centralized to the headquarters. Different departments in the corporate office have their own interconnected LANs and are all connected to the external world through a device that we shall temporarily call a gateway, since it opens the gate to the external world. In our example, a router of some kind provides the gateway function. You may also hear the term default router used for this purpose. Another name for routers in this role is first hop router, since this is the first router the hosts need to use to reach any destination they cannot reach through direct routing.

Given the centralized setup of our illustration, branch offices of the enterprise depend heavily on the computer resources residing in the corporate office. Without access to these resources, the branch offices may fail to perform even their most basic functions.

The network settings and computer equipment of the branch offices are more modest. Depending on the specifics of the business, it may just contain a series of locally networked PCs. Connection to the cloud is established through a router acting as a gateway device, that is, a first hop router.

A Closer Look at the Branch Office

Now given the importance of the corporate resources that branch offices can only access through the cloud, the availability of the network services is extremely critical to the business. In our scenario, first hop routers constitute single points of failure.

VRRP, the protocol we are going to discuss in this book, provides a scheme intended to avoid this specific type of single points of failure. To understand how the need arises for this specific scheme and how VRRP basically achieves this avoidance, we zoom in to one of the branch offices.

In this branch office configuration, we have a series of general-purpose computers—PCs, workstations, laptops—interconnected via a LAN (typically Ethernet) to exchange local information, to share local resources. In this configuration, it is extremely clear that the first hop router constitutes the single point of failure for the network access of the branch office. In order to avoid this problem, the first step would be to introduce a redundant first hop router. Figure 2-2 depicts a configuration with two routers positioned to act in the first hop function.

Now several questions arise: How do these hosts decide which one of the routers (R1 or R2) to use initially or in normal circumstances? How do they switch to the available one should the one they were using fail? Hosts thus need a mechanism to decide which one of the hosts to use. They also need a mechanism to decide when to perform a switch. Moreover, when there is more than one backup router, they also need a mechanism to decide to which one of the backups to switch. Thus the questions at hand are threefold:

  1. How do the hosts discover or select the first hop routers?

  2. How do the hosts switch to backups when the master fails?

  3. How do the hosts decide which backup to switch to when there is more than one?

There are various ways of implementing a mechanism to answer the above questions. The solution depends first of all on a series of assumptions surrounding the questions at hand. Maybe the most fundamental one of these assumptions is that the network depicted in Figure 2-2 (network N1) is an IP network, that the communication between the hosts and the router relies on IP, and that the router under discussion is an IP router. Note that the cloud (network N2) may be running a variety of protocols: ATM, Frame Relay, and so on. Network N2 is most typically the network of a service provider, the transport mechanisms of which are transparent to the IP connectivity of the network N1.

Figure 2-2FIGURE 2-2. ARouter pair

Furthermore, there are additional questions that are of prime importance to network administrators in particular:

  1. What is the status of backups when they act as backups? Are they just on standby, or are they also handling some portion of the traffic? What are the advantages and disadvantages of both approaches?

  2. If the backups are just on standby, how is this wasteful use of resources justified?

  3. If the backups are incorporated in a load-sharing arrangement, what are the mechanisms for achieving that?

Dynamic Routing

One category of solution consists of installing additional networking software within the hosts. Introducing dynamic routing software (such as RIP or OSPF) would come into this category. With the routing software enabled, hosts can behave as routers in addition to their end-system behavior. They can discover the first hop routers available in the LAN, for example, by listening to RIP updates on port 520. In case of failure, they can switch to alternate routers based on the routing protocol at hand. To follow the RIP example, they may receive a triggered event implying the failure of the current first hop router. Moreover, the metric mechanisms of the protocol can establish the switching priority among alternative first hop routers. By assigning different costs to different links, the network administrator can create a hierarchy of alternative first hop RIP routers.

This solution may be not the best or may not be feasible for several reasons. The hosts may not have the capacity to run routing software—in particular, a sophisticated and therefore demanding software such as OSPF. But even RIP in its passive mode, where the host can just listen to the updates without sending messages of its own, can be too much for an underpowered PC. Even if they were able to run RIP, RIP might turn out to be too slow to adapt to topology changes. In some cases, the implementation of these protocols may not be available at all on certain platforms.

Administrative concerns constitute another major obstacle to the use of dynamic routing protocols in the setting under discussion: the installment, the configuration, and the overall management of these protocols may be totally undoable given the centralization of the network management in our illustrative enterprise. Many administrators consider running routing protocols at the desktops a management nightmare. Keeping track of the routing software on different machines, making sure that they are all configured properly, they are all interoperable....These are next to insurmountable challenges. Centralizing the routing intelligence at the edge of outbound pipe brings substantial simplicity to overall availability solutions in a way totally transparent to the end stations.

Security considerations may always be show stoppers in most networking issues, including running a dynamic protocol in a remote branch office ill equipped to handle basic protection requirements.

ICMP Discovery

As an alternative to dynamic routing, we can look at ICMP and consider running an ICMP router discovery client on our hosts. As a matter of fact, in recent times, some of the newer IP hosts use Router Discovery Protocol (RDP) to find a new router when a route becomes unavailable. A host that runs RDP listens for hello multicast messages from its configured router and uses an alternative router when it no longer receives those hello messages. The default timer values of RDP mean that it's not suitable for quick detection of failure of the first hop, since the default advertisement rate is once every 7 to 10 minutes and the default lifetime is 30 minutes.

Moreover, this approach would require the active participations of all hosts. The increasing number of the hosts would require larger timer values to minimize the protocol overhead in the network. The larger timers, on the other hand, would lead to longer delays in the discovery of the failing neighbors, most important of the neighbors in the first hop router role. The result of these delays can be unacceptably long black hole periods.

Proxy Address Resolution Protocol (ARP)

Some IP hosts use proxy ARP to select a router. When a host runs proxy ARP, it sends an ARP request for the IP address of the remote host it wants to contact. A router, let us say R1 on the network, replies on behalf of the remote host and provides its own MAC address. With proxy ARP, the host behaves as if the remote host were connected to the same segment of the network. If the router R1 fails, the host continues to send packets destined for the remote host to the MAC address of R1, even though those packets have nowhere to go and are lost. You can either wait for ARP to acquire the MAC address of another router—say, R2 on the local segment—by sending another ARP request, or reboot the host to force it to send an ARP request. In either case, for a significant period of time the host can't communicate with the remote host, even though the routing protocol has converged, and R2 is prepared to transfer packets that would otherwise go through R1.

Dynamic Host Configuration Protocol (DHCP)

An interesting alternative is DHCP, a very popular and common method for providing configuration information to hosts on IP networks. A host running a DHCP client requests configuration information from a DHCP server when it boots onto the network. This configuration information typically comprises an IP address for the host and an IP address for a first hop router. Once configured, there is no mechanism within DHCP for switching to an alternative router if the default router fails. From the point of view of our stated problem, DHCP helps with discovery or selection of the first hop routers, but not with creating a redundancy scheme and establishing a switchover mechanism.

Static Configuration and VRRP

The final alternative under consideration would be reliance on the static routing. In this scenario, a network administrator would configure the IP address of the host as well as a first hop router as the default router for the host or use DHCP as discussed to obtain an IP address for the client and to learn the IP address of the default router.

This is by far the most feasible of the discussed alternatives. Static configurations are supported almost without exception by all TCP/IP implementations. This solution becomes even more attractive with the continuous deployment of DHCP clients and servers that substantially facilitates the configuration of the default routers.

The obvious shortcoming of this approach, though, is the same as the one we have discussed in our conclusion about DHCP. The static configuration helps with the discovery of the first hop router but does not help with the switchover or the selection of a master from the multiple backups. This very shortcoming leads to the creation of VRRP.

Having the first hop router configured as the default router establishes access to the external network, but another mechanism is needed to keep the access available. In the case of a failing default router, the hosts have no means for switching to an alternative router available in the network. Under these circumstances, unfortunately, the statically configured first hop router becomes the single point of failure for the network availability. VRRP enables additional routers to take over the role of a failing first hop router, thus helping them to avoid becoming the single point of failure for network services. Table 2-1 summarizes the advantages and disadvantages of the different approaches to protect first hop (gateway) routers.

TABLE 2-1.  Different Approaches to Protect the Gateway Routers

Solution

Advantages

Disadvantages

Dynamic Routing

flexible: different failover hierarchies can be established more failure points protected

requires routing software in the hosts demanding on the hosts challenging to administer security concerns

ICMP Discovery

may come with new IP stacks in the hosts

requires discovery software in the hosts with older IP stacks-not responsive, may lead to black holes

Proxy ARP

no special software required

not repsonsive, may lead to

 

in the host

black holes-may require rebooting of the hosts

DHCP

 

does not help with failover

VRRP with Static Routing

static route configuration commonly available with TCP/IP does not require any special software in the host based on an industry standard-responsive or can be fine-tuned to be responsive

protects only the default router's-local interface but mechanism extendable to trigger a switch over in the case of other interfaces applicable only to IP networks, -but other protocols such as IPX on a VRRP interface able to be piggy-backed with IP for VRRP


InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020