Home > Articles > Certification > Cisco Certification > CCNA

  • Print
  • + Share This
This chapter is from the book

Lab Follow-up Tasks

You now have successfully configured RIP and verified its proper operation. Now that RIP has been configured between R1 and R2, draw the RIP routing domains on the master lab diagram to help you to see and understand routing boundaries. For example, because you have configured RIP between R1 and R2, you should draw a line encompassing all interfaces that have been included in the RIP routing process. In this way, you can have a visual representation of what routes you'd expect to be advertised to neighboring RIP routers. See Figure 8-2 for an example.

Figure 8-2 RIP Routing Domain

You now are prepared to move on to IGRP configuration and operation.

  • + Share This
  • 🔖 Save To Your Account