Home > Articles > Engineering

Introduction to Petroleum Reservoirs and Reservoir Engineering

This chapter from Applied Petroleum Reservoir Engineering, 3rd Edition introduces petroleum reservoirs and discusses the history of reservoir engineering, terminology, reservoir types defined with reference to phase diagrams, production from petroleum reservoirs, and Peak Oil.
This chapter is from the book

While the modern petroleum industry is commonly said to have started in 1859 with Col. Edwin A. Drake’s find in Titusville, Pennsylvania, recorded history indicates that the oil industry began at least 6000 years ago. The first oil products were used medicinally, as sealants, as mortar, as lubricants, and for illumination. Drake’s find represented the beginning of the modern era; it was the first recorded commercial agreement to drill for the exclusive purpose of finding petroleum. While the well he drilled was not commercially successful, it did begin the petroleum era by leading to an intense interest in the commercial production of petroleum. The petroleum era had begun, and with it came the rise of petroleum geology and reservoir engineering.

1.1 Introduction to Petroleum Reservoirs

Oil and gas accumulations occur in underground traps formed by structural and/or stratigraphic features.1 Figure 1.1 is a schematic representation of a stratigraphic trap. Fortunately, the hydrocarbon accumulations usually occur in the more porous and permeable portion of beds, which are mainly sands, sandstones, limestones, and dolomites; in the intergranular openings; or in pore spaces caused by joints, fractures, and solution activity. A reservoir is that portion of the trapped formation that contains oil and/or gas as a single hydraulically connected system. In some cases the entire trap is filled with oil or gas, and in these instances the trap and the reservoir are the same. Often the hydrocarbon reservoir is hydraulically connected to a volume of water-bearing rock called an aquifer. Many reservoirs are located in large sedimentary basins and share a common aquifer. When this occurs, the production of fluid from one reservoir will cause the pressure to decline in other reservoirs by fluid communication through the aquifer.

Figure 1.1

Figure 1.1 Schematic representation of a hydrocarbon deposit in a stratigraphic trap.

Hydrocarbon fluids are mixtures of molecules containing carbon and hydrogen. Under initial reservoir conditions, the hydrocarbon fluids are in either a single-phase or a two-phase state. A single-phase reservoir fluid may be in a liquid phase (oil) or a gas phase (natural gas). In either case, when produced to the surface, most hydrocarbon fluids will separate into gas and liquid phases. Gas produced at the surface from a fluid that is liquid in the reservoir is called dissolved gas. Therefore, a volume of reservoir oil will produce both oil and the associated dissolved gas at the surface, and both dissolved natural gas and crude oil volumes must be estimated. On the other hand, liquid produced at the surface from a fluid that is gas in the reservoir is called gas condensate because the liquid condenses from the gas phase. An older name for gas condensate is gas distillate. In this case, a volume of reservoir gas will produce both natural gas and condensate at the surface, and both gas and condensate volumes must be estimated. Where the hydrocarbon accumulation is in a two-phase state, the overlying vapor phase is called the gas cap and the underlying liquid phase is called the oil zone. There will be four types of hydrocarbon volumes to be estimated when this occurs: the free gas or associated gas, the dissolved gas, the oil in the oil zone, and the recoverable natural gas liquid (condensate) from the gas cap.

Although the hydrocarbons in place are fixed quantities, which are referred to as the resource, the reserves depend on the mechanisms by which the reservoir is produced. In the mid-1930s, the American Petroleum Institute (API) created a definition for reserves. Over the next several decades, other institutions, including the American Gas Association (AGA), the Securities and Exchange Commissions (SEC), the Society of Petroleum Engineers (SPE), the World Petroleum Congress (now Council; WPC), and the Society of Petroleum Evaluation Engineers (SPEE), have all been part of creating formal definitions of reserves and other related terms. Recently, the SPE collaborated with the WPC, the American Association of Petroleum Geologists (AAPG), and the SPEE to publish the Petroleum Resources Management System (PRMS).2 Some of the definitions used in the PRMS publication are presented in Table 1.1. The amounts of oil and gas in these definitions are calculated from available engineering and geologic data. The estimates are updated over the producing life of the reservoir as more data become available. The PRMS definitions are obviously fairly complicated and include many other factors that are not discussed in this text. For more detailed information regarding these definitions, the reader is encouraged to obtain a copy of the reference.

Table 1.1 Definitions of Petroleum Terms from the Petroleum Resources Management System2

Petroleum is defined as a naturally occurring mixture consisting of hydrocarbons in the gaseous, liquid, or solid phase. Petroleum may also contain nonhydrocarbons, common examples of which are carbon dioxide, nitrogen, hydrogen sulfide, and sulfur. In rare cases, nonhydrocarbon content could be greater than 50%.

The term resources as used herein is intended to encompass all quantities of petroleum naturally occurring on or within the Earth’s crust, discovered and undiscovered (recoverable and unrecoverable), plus those quantities already produced. Further, it includes all types of petroleum, whether currently considered “conventional” or “unconventional.”

  • Total petroleum initially-in-place is that quantity of petroleum that is estimated to exist originally in naturally occurring accumulations. It includes that quantity of petroleum that is estimated, as of a given date, to be contained in known accumulations prior to production, plus those estimated quantities in accumulations yet to be discovered (equivalent to “total resources”).
  • Discovered petroleum initially-in-place is that quantity of petroleum that is estimated, as of a given date, to be contained in known accumulations prior to production.
  • Production is the cumulative quantity of petroleum that has been recovered at a given date. While all recoverable resources are estimated and production is measured in terms of the sales product specifications, raw production (sales plus nonsales) quantities are also measured and required to support engineering analyses based on reservoir voidage. Multiple development projects may be applied to each known accumulation, and each project will recover an estimated portion of the initially-in-place quantities. The projects are subdivided into commercial and subcommercial, with the estimated recoverable quantities being classified as reserves and contingent resources, respectively, which are defined as follows.
  • Reserves are those quantities of petroleum anticipated to be commercially recoverable by application of development projects to known accumulations from a given date forward under defined conditions. Reserves must further satisfy four criteria: they must be discovered, recoverable, commercial, and remaining (as of the evaluation date), based on the development project(s) applied. Reserves are further categorized in accordance with the level of certainty associated with the estimates and may be subclassified based on project maturity and/or characterized by development and production status.
  • Contingent resources are those quantities of petroleum estimated, as of a given date, to be potentially recoverable from known accumulations, but the applied project(s) are not yet considered mature enough for commercial development due to one or more contingencies. Contingent resources may include, for example, projects for which there are currently no viable markets, where commercial recovery is dependent on technology under development or where evaluation of the accumulation is insufficient to clearly assess commerciality. Contingent resources are further categorized in accordance with the level of certainty associated with the estimates and may be subclassified based on project maturity and/or characterized by their economic status.
  • Undiscovered petroleum initially-in-place is that quantity of petroleum estimated, as of a given date, to be contained within accumulations yet to be discovered.
  • Prospective resources are those quantities of petroleum estimated, as of a given date, to be potentially recoverable from undiscovered accumulations by application of future development projects. Prospective resources have both an associated chance of discovery and a chance of development. Prospective resources are further subdivided in accordance with the level of certainty associated with recoverable estimates, assuming their discovery and development and may be subclassified based on project maturity.
  • Unrecoverable refers to the portion of discovered or undiscovered petroleum initially-in-place quantities that is estimated, as of a given date, not to be recoverable by future development projects. A portion of these quantities may become recoverable in the future as commercial circumstances change or technological developments occur; the remaining portion may never be recovered due to physical/chemical constraints represented by subsurface interaction of fluids and reservoir rocks.

Further, estimated ultimate recovery (EUR) is not a resources category but a term that may be applied to any accumulation or group of accumulations (discovered or undiscovered) to define those quantities of petroleum estimated, as of a given date, to be potentially recoverable under defined technical and commercial conditions plus those quantities already produced (total of recoverable resources).

In specialized areas, such as basin potential studies, alternative terminology has been used; the total resources may be referred to as total resource base or hydrocarbon endowment. Total recoverable or EUR may be termed basin potential. The sum of reserves, contingent resources, and prospective resources may be referred to as remaining recoverable resources. When such terms are used, it is important that each classification component of the summation also be provided. Moreover, these quantities should not be aggregated without due consideration of the varying degrees of technical and commercial risk involved with their classification.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020