Home > Articles > Security > Network Security

Cryptography with Java

This chapter is from the book

Encryption and Decryption

Encryption is the process of converting normal data or plaintext to something incomprehensible or cipher-text by applying mathematical transformations. These transformations are known as encryption algorithms and require an encryption key. Decryption is the reverse process of getting back the original data from the cipher-text using a decryption key. The encryption key and the decryption key could be the same as in symmetric or secret key cryptography, or different as in asymmetric or public key cryptography.

Algorithms

A number of encryption algorithms have been developed over time for both symmetric and asymmetric cryptography. The ones supported by the default providers in J2SE v1.4 are: DES, TripleDES, Blowfish, PBEWithMD5AndDES, and PBEWithMD5AndTripleDES. Note that these are all symmetric algorithms.

DES keys are 64 bits in length, of which only 56 are effectively available as one bit per byte is used for parity. This makes DES encryption quite vulnerable to brute force attack. TripleDES, an algorithm derived from DES, uses 128-bit keys (112 effective bits) and is considered much more secure. Blowfish, another symmetric key encryption algorithm, could use any key with size up to 448 bits, although 128-bit keys are used most often. Blowfish is faster than TripleDES but has a slow key setup time, meaning the overall speed may be less if many different keys are used for small segments of data. Algorithms PBEWithMD5AndDES and PBEWithMD5AndTripleDES take a password string as the key and use the algorithm specified in PKCS#5 standard.

There are currently four FIPS approved symmetric encryption algorithms: DES, TripleDES, AES (Advanced Encryption Standard) and Skipjack. You can find more information about these at http://csrc.nist.gov/CryptoToolkit/tkencryption.html. Among these, AES is a new standard and was approved only in 2001. Note that both AES and Skipjack are not supported in J2SE v1.4.1

All these algorithms operate on a block of data, typically consisting of 64 bits or 8 bytes, although smaller blocks are also possible. Each block can be processed independently or tied to the result of processing on the earlier block, giving rise to different encryption modes. Commonly used and supported modes include ECB (Electronic CookBook) mode, whereby each block is processed independently, CBC (Cipher Block Chaining) mode, whereby the result of processing the current block is used in processing the next block), CFB (Cipher Feed Back) and OFB (Output Feed Back). Detailed information on these modes and their performance, security and other characteristics can be found in the book Applied Cryptography by noted cryptographer Bruce Schneier.

CFB and OFB modes allow processing with less than 64 bits, with the actual number of bits, usually a multiple of 8, specified after the mode such as CFB8, OFB8, CFB16, OFB16 and so on. When a mode requires more than 1 byte to do the processing, such as ECB, CBC, CFB16, OFB16 and so on, the data may need to be padded to become a multiple of the block size. Bundled providers support PKCS5Padding, a padding scheme specified in PKCS#5. Also, modes CBC, CFB and OFB need an 8-byte Initialization Vector, so that even the first block has an input to start with. This must be same for both encryption and decryption.

Java API

Java class javax.crypto.Cipher is the engine class for encryption and decryption services. A concrete Cipher object is created by invoking the static method getInstance() and requires a transform string of the format algorithm/mode/padding (an example string would be "DES/ECB/PKCS5Padding") as an argument. After creation, it must be initialized with the key and, optionally, an initialization vector. After initialization, method update() can be called any number of times to pass byte arrays for encryption or decryption, terminated by a doFinal() invocation.

The example program SymmetricCipherTest.java illustrates symmetric encryption and decryption. This program generates a secret key for DES algorithm, encrypts the bytes corresponding to a string value using the generated key and finally decrypts the encrypted bytes to obtain the original bytes. Note the use of an initialization vector for both encryption and decryption. Although the code in this program works on a byte array, it is possible to pass multiple smaller chunks of byte sequences to the Cipher instance before initiating the encryption or decryption.

The code presented here doesn't list individual exceptions thrown in method encrypt() and decrypt(), but you can find them in the electronic version of the source file.

Listing 3-5. Encryption and Decryption with a symmetric Cipher

// File: src\jsbook\ch3\SymmetricCipherTest.java
import javax.crypto.KeyGenerator;
import javax.crypto.SecretKey;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.Cipher;

public class SymmetricCipherTest {
  private static byte[] iv =
      { 0x0a, 0x01, 0x02, 0x03, 0x04, 0x0b, 0x0c, 0x0d };

  private static byte[] encrypt(byte[] inpBytes,
      SecretKey key, String xform) throws Exception {
    Cipher cipher = Cipher.getInstance(xform);
    IvParameterSpec ips = new IvParameterSpec(iv);
    cipher.init(Cipher.ENCRYPT_MODE, key, ips);
    return cipher.doFinal(inpBytes);
  }

  private static byte[] decrypt(byte[] inpBytes,
      SecretKey key, String xform) throws Exception {
    Cipher cipher = Cipher.getInstance(xform);
    IvParameterSpec ips = new IvParameterSpec(iv);
    cipher.init(Cipher.DECRYPT_MODE, key, ips);
    return cipher.doFinal(inpBytes);
  }

  public static void main(String[] unused) throws Exception {
    String xform = "DES/ECB/PKCS5Padding";
    // Generate a secret key
    KeyGenerator kg = KeyGenerator.getInstance("DES");
    kg.init(56); // 56 is the keysize. Fixed for DES
    SecretKey key = kg.generateKey();

    byte[] dataBytes =
        "J2EE Security for Servlets, EJBs and Web Services".getBytes();

    byte[] encBytes = encrypt(dataBytes, key, xform);
    byte[] decBytes = decrypt(encBytes, key, xform);

    boolean expected = java.util.Arrays.equals(dataBytes, decBytes);
    System.out.println("Test " + (expected ? "SUCCEEDED!" : "FAILED!"));
  }
}

Compiling and running this program is similar to other programs in this chapter.

Encryption algorithm PBEWithMD5AndDES requires a slightly different initialization sequence of the Cipher object. Also, there is an alternate mechanism to do encryption decryption involving classes CipherInputStream and CipherOutputStream. We do not cover these methods here. If you are interested in their use, look at the source code of utility crypttool.

The same sequence of calls, with appropriate modifications, would be valid for asymmetric cryptography as well. The example program AsymmetricCipherTest.java illustrates this.

Listing 3-6. Encryption and Decryption with a asymmetric Cipher

// File: src\jsbook\ch3\AsymmetricCipherTest.java
import java.security.KeyPairGenerator;
import java.security.KeyPair;
import java.security.PublicKey;
import java.security.PrivateKey;
import javax.crypto.Cipher;

public class AsymmetricCipherTest {
  private static byte[] encrypt(byte[] inpBytes, PublicKey key,
      String xform) throws Exception {
    Cipher cipher = Cipher.getInstance(xform);
    cipher.init(Cipher.ENCRYPT_MODE, key);
    return cipher.doFinal(inpBytes);
  }
  private static byte[] decrypt(byte[] inpBytes, PrivateKey key,
      String xform) throws Exception{
    Cipher cipher = Cipher.getInstance(xform);
    cipher.init(Cipher.DECRYPT_MODE, key);
    return cipher.doFinal(inpBytes);
  }

  public static void main(String[] unused) throws Exception {
    String xform = "RSA/NONE/PKCS1PADDING";
    // Generate a key-pair
    KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA");
    kpg.initialize(512); // 512 is the keysize.
    KeyPair kp = kpg.generateKeyPair();
    PublicKey pubk = kp.getPublic();
    PrivateKey prvk = kp.getPrivate();

    byte[] dataBytes =
        "J2EE Security for Servlets, EJBs and Web Services".getBytes();

    byte[] encBytes = encrypt(dataBytes, pubk, xform);
    byte[] decBytes = decrypt(encBytes, prvk, xform);

    boolean expected = java.util.Arrays.equals(dataBytes, decBytes);
    System.out.println("Test " + (expected ? "SUCCEEDED!" : "FAILED!"));
  }
}

Note that this program uses a KeyPairGenerator to generate a public key and a private key. The public key is used for encryption and the private key is used for decryption. As there is no padding, there was no need to have an initialization vector.

The only caveat is that J2SE v1.4 bundled providers do not support asymmetric encryption algorithms. You would need to install a third-party JCE provider for this. You could use the Bouncy Castle provider. In fact, the above program is tested against this provider.

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020